• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4B
• /
• pp.329-337
• /
• 2009

In this study we briefly introduce the electronic float system based on the GPS and RF communication technology and present some field application results. The system is capable of operating 15 floats simultaneously for making discharge measurement. Since the electronic floats (EFs) acquire flow paths, they can improve velocity measurement accuracy up to 10%. Additionally, measured velocities by the EFs show good agreement with those by an ADCP. Relative difference in sub-section area calculated by the electronic and conventional float methods is -79~71% and, due to convergent tendency of floats flowing along near banks, it increases much larger. It is possible to improve accuracy up to 5~6% in making discharge measurement by the electronic floats at site with irregular flow paths and section arrangement. The electronic float system is capable of calculating more accurate velocity and section area using position information based on GPS. By real-time measurement of velocity, cross-section area and discharge, the electronic float system is expected to reduce manpower and improve accuracy, rapidity and efficiency of flood discharge measurements.

• Journal of the Korea Society for Simulation
• /
• v.22 no.1
• /
• pp.9-20
• /
• 2013

Defense M&S for weapons effectiveness is a realistic way to support virtual warfare similar to real warfare. As the war paradigm becomes platform-centric to network-centric, people try to utilize smartphones as the source of sensor, and command/control data in the simulation-based weapons effectiveness analysis. However, there have been limited researches on integrating smartphones into the weapon simulators, partly due to high modeling cost - modeling cost to accomodate client-server architecture, and re-engineering cost to adapt the simulator on various devices and platforms -, lack of efficient mechanisms to exchange large amount of simulation data, and low-level of security. In this paper, we design and implement Smartphone Adaptor to utilize smartphones for the simulationbased weapons effectiveness analysis. Smartphone Adaptor automatically sends sensor information, GPS and motion data of a client's smartphone to a simulator and receives simulation results from the simulator on the server. Also, we make it possible for data to be transferred safely and quickly through JSON and SEED. Smartphone Adaptor is applied to OpenSIM (Open simulation engine for Interoperable Models) which is an integrated simulation environment for weapons effectiveness analysis, under development of our research team. In this paper, we will show Smartphone Adaptor can be used effectively in constructing a Live simulation, with an example of a chemical simulator.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.48-54
• /
• 2020

Researchers recognized air pollution changes causing diseases and difficulties in living due to environmental pollution following various human activities, and have studied how to avoid fine dust harmful to the human respiratory system to be healthy. To this end, Arduino is used to equip fine dust level sensors in drones to measure the fine dust levels, visualize the measurements with LED indicator colors depending on the measurements to inform users of the danger of fine dust, and use the benefits of drones to specify dangerous fine dust zones and measure the fine dust levels. Users can see the changes depending on the fine dust levels in real time with the LED indicators. This will contributes to measuring fine dust levels easily in dangerous areas. Mission Planner (ArduPilot) is used to set up the GPS of drone, and store the data from the dust sensor as contents. This study aims to establish a method for improving the environment to measure fine dust levels with drones with LED indicators for fine dust, and reduce fine dust.

• Journal of Internet Computing and Services
• /
• v.7 no.3
• /
• pp.31-39
• /
• 2006

Ubiquitous and pervasive environment presents opportunities for a rich set of location aware applications such as car navigation and intelligent robots, interactive virtual games, logistics service, asset tracking etc. Typical indoor location systems require better accuracy than what current outdoor location systems provide, Outdoor location technologies such as GPS have poor indoor performance because of the harsh nature of indoor environments, In this paper we present a novel reducing interference location system that is particularly well suited to support context aware computing. The system, called EEM (Enhance Envelop Method) alms to combine the advantages of real time tracking systems that implement distributed environment with the suitability of infrastructure sensor network.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06b
• /
• pp.400-404
• /
• 2008

무인항공기를 이용한 실시간 공중 모니터링은 재난 재해, 테러 등의 위기상황을 사전에 대비하고, 사고 발생 시 피해상황을 신속하게 파악할 수 있는 효율적인 관리 시스템이다. 실시간 공중 모니터링을 위해 무인항공부문에서는 고성능의 카메라, 관성항법장치, 레이저 스캐너, GPS 수신기 등의 다중 센서들을 장착하고, 제어하며 각 센서들로부터 입력받은 데이터 처리 및 지상국으로 데이터 전송이 실시간으로 가능해야 한다. 기존 무인 모니터링 시스템들은 카메라와 같이 단일 센서의 운용을 목적으로 설계되었으나, 본 연구에서는 레이져 스캐너, 적외선카메라를 포함하는 다중센서를 위한 컴퓨터를 설계하였다. 최근 다중센서를 장착한 관측시스템에 관한 연구가 미국 및 유럽에서 수행되고 있으나, 아직 개발이 완료되지 않은 상태이다. 본 논문에서는 고성능 다중 센서 데이터 처리를 위해 실시간 소프트웨어, 고속 대용량 데이터처리 기술, 고속 압축 기술, 이기종 다중 센서들 간의 시각 동기화 기능을 제공하는 탑재컴퓨터의 설계결과를 소개하였다.

• Journal of Multimedia Information System
• /
• v.6 no.4
• /
• pp.265-270
• /
• 2019

The technology to locate an individual has enabled various services, its utilization has increased. There were constraints such as the use of separate expensive equipment or the installation of specific devices on a facility, with most of the location technology studies focusing on the accuracy of location verification. These constraints can result in accuracy within a few tens of centimeters, but they are not technology that can be applied to a user's location in real-time in daily life. Therefore, this paper aims to track the locations of smartphones only using the basic components of smartphones. Based on smartphone sensor data, localization accuracy that can be used for verification of the users' locations is aimed at. Accelerometers, Wifi radio maps, and GPS sensor information are utilized to implement it. In forging the radio map, signal maps were built at each vertex based on the graph data structure This approach reduces traditional map-building efforts at the offline phase. Accelerometer data were made to determine the user's moving status, and the collected sensor data were fused using particle filters. Experiments have shown that the average user's location error is about 3.7 meters, which makes it reasonable for providing location-based services in everyday life.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.2120-2126
• /
• 2010

This paper aims to realize the location tracking system using the Zigbee in the wireless sensor network. The wireless sensor network offers the user-oriented location tracking service in the ubiquitous environment. The location tracking service can track the location of an object or a person and provides it. The location tracking system realized in this paper can be used inside or outside without any black-out areas to measure the location of the moving nodes. In tracking inside the RSSI signals use and in tracking outside will connect with the GPS signals to track the location. Also, by using Zigbee, the wireless sensor network environment was established and by obtaining the location of the moving nodes, the real-time tracking is possible.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.10
• /
• pp.56-65
• /
• 1999

This paper presents an architecture and its instruction set for a graphic coprocessor(GCP) which can be used for a multimedia server. The proposed instruction set employs parallel architecture concepts, such as SIMD and Superscalar. GCP consists of a scheduler and four functional units. The scheduler solves an instruction bottleneck problem causing by sharing with four general processors(GPs). GCP can execute up to 4 instructions in parallel. It consists of about 56,000 gates and operates at 30 MHz clock frequency due to speed limitation of SOG technology. GCP meets the real-time DCT algorithm requirement of the CIF image format and can process up to 63 frames/sec for the DCT Algorithm and 21 frames/sec for the Full Block matching Algorithm of the CIF image format.

• Journal of Broadcast Engineering
• /
• v.20 no.3
• /
• pp.440-448
• /
• 2015

A pedestrian collision warning system which makes a judgement of pedestrian's intention to help avoiding hitting accidents is proposed. This system uses the image sequences obtained from a car black box as well as vehicle's speed obtained from a GPS. It detects pedestrians, if any, based on the Histogram of Gradient method and extracts several information such as the pedestrian's relative positions, the direction of motion vectors, and distance between vehicle and pedestrian . A fuzzy logic based on these extracted information is applied to analyze the pedestrian's safety levels. When the safety level is determined to be danger, an alarm is triggered to the driver. The performance of the proposed algorithm is tested under various driving scenarios, which shows it works successfully in real-time.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.273-278
• /
• 2012

Wired communication signals that are generated in a wheelchair and using GPS to gather speed in this study. And occupants in the helmet, and save your current location information in a wheelchair and speed information that is passed by smartphone to take advantage of the Black Box App and radio feature multi-Communications App S/W development.The results of this study can be utilized effectively a pseudo-real-time information can be shared in each other's wheelchair with many people moving. Limitations of the study at the Institute of Experimental concrete measures for the commercial approach to the development of operational models as required.