• 한국IT서비스학회지
• /
• 제11권sup호
• /
• pp.113-121
• /
• 2012

In this study, a real-time fall detection system based on a smartphone equipped with three-axis accelerometer and magnetometer was proposed and evaluated. The proposed system provides a service that detects falls in real time, triggers alarm sound, and sends emergency SMS(Short Message Service) if the alarm is not deactivated within a predefined time. When both of the acceleration magnitude and angle displacement of the smartphone attached to waist belt are greater than predefined thresholds, it is detected as a fall. The proposed system was evaluated against activities of daily living(walking, jogging, sitting down, standing up, ascending stairs, and descending stairs) and unintended falls induced by a proprietary pneumatic-powered mattress. With the thresholds of acceleration magnitude 1.7g and angle displacement $80^{\circ}$, it showed 96.5% accuracy to detect the falls while all the activities of daily living were not detected as fall.

• 정보와 통신
• /
• 제10권10호
• /
• pp.22-29
• /
• 1993

This paper describes development of a real-time voice recognition dialing system which can recognize around one hundred word vocabularies in speaker independent mode. The voice recognition algorithm is implemented on a DSP board with a telephone interface plugged in an IBM PC AT/486. In the DSP board, procedures for feature extraction, vector quantization(VQ), and end-point detection are performed simultaneously in every 10msec frame interval to satisfy real-time constraints after the word starting point detection. In addition, we optimize the VQ codebook size and the end-point detection procedure to reduce recognition time and memory requirement. The demonstration system is being displayed in MOBILAB of Korea Mobile Telecom at the Taejon EXPO '93.

• International Journal of Internet, Broadcasting and Communication
• /
• 제11권4호
• /
• pp.76-85
• /
• 2019

We introduce a vision-based object detection method for real-time video surveillance system in low-end edge computing environments. Recently, the accuracy of object detection has been improved due to the performance of approaches based on deep learning algorithm such as Region Convolutional Neural Network(R-CNN) which has two stage for inferencing. On the other hand, one stage detection algorithms such as single-shot detection (SSD) and you only look once (YOLO) have been developed at the expense of some accuracy and can be used for real-time systems. However, high-performance hardware such as General-Purpose computing on Graphics Processing Unit(GPGPU) is required to still achieve excellent object detection performance and speed. To address hardware requirement that is burdensome to low-end edge computing environments, We propose sub-frame analysis method for the object detection. In specific, We divide a whole image frame into smaller ones then inference them on Convolutional Neural Network (CNN) based image detection network, which is much faster than conventional network designed forfull frame image. We reduced its computationalrequirementsignificantly without losing throughput and object detection accuracy with the proposed method.

• International Journal of Internet, Broadcasting and Communication
• /
• 제9권2호
• /
• pp.20-26
• /
• 2017

Process control is crucial in many industries, especially in semiconductor manufacturing. In such large-volume multistage manufacturing systems, a product has to go through a very large number of processing steps with reentrant) before being completed. This manufacturing system has many machines of different types for processing a high mix of products. Each process step has specific quality standards and most of them have nonlinear dynamics due to physical and/or chemical reactions. Moreover, many of the processing steps suffer from drift or disturbance. To assure high stability and yield, on-line quality monitoring of the wafers is required. In this paper we develop a real-time fault detection system on semiconductor manufacturing process. Proposed system is superior to other incremental fault detection system and shows similar performance compared to batch way.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.367-371
• /
• 1990

In this paper, a real-time fault tolerant control system has been designed for the cooling system of the spent fuel pool storage. The fault tolerant control system consists of the fault detection part, the redundant actuator part(main and backup pumps) and the controller implemented on programmable. logic controller. This paper considers only the actuator fault whose detection is accomplished using Friedland's separated bias estimation method. This paper also shows the real-time experimental results from which it can be concluded that the designed fault tolerant control system exhibits satisfactory performance.

• 한국자동차공학회논문집
• /
• 제22권7호
• /
• pp.107-116
• /
• 2014

This paper presents camera-based road surface marking detection methods suited to sensor fusion-based positioning system that consists of low-cost GPS (Global Positioning System), INS (Inertial Navigation System), EDM (Extended Digital Map), and vision system. The proposed vision system consists of two parts: lane marking detection and RSM (Road Surface Marking) detection. The lane marking detection provides ROIs (Region of Interest) that are highly likely to contain RSM. The RSM detection generates candidates in the regions and classifies their types. The proposed system focuses on detecting RSM without false detections and performing real time operation. In order to ensure real time operation, the gating varies for lane marking detection and changes detection methods according to the FSM (Finite State Machine) about the driving situation. Also, a single template matching is used to extract features for both lane marking detection and RSM detection, and it is efficiently implemented by horizontal integral image. Further, multiple step verification is performed to minimize false detections.

• 한국통신학회논문지
• /
• 제29권8C호
• /
• pp.1184-1192
• /
• 2004

개인용 컴퓨터에 연결하여 널리 사용되는 가시광선 카메라에 의해서 획득된 실시간 영상 데이터를 가지고 동공의 움직임을 검출하는 시스템을 제안하였다. 시스템은 3단계로 구성되는데, 첫 단계로 haar-like 기반의 특징 기법을 이용해서 얼굴 영역이 검출되고, 다음으로 얼굴 영역 내에서 템플릿 기반 기법을 이용하여 눈 영역이 검출된다. 끝으로 눈 영역 내에서 동공 부위가 검출되는데 눈 영상의 수평 및 수직 히스토그램 프로파일에 가우시안 필터를 컨벌루션 한 기법을 제안하였다. 실험 결과 2375개의 영장에 대해서 90% 이상의 검출율을 얻었으며 데이터 처리시간은 약 160㎳로 초당 7회씩 검출할 수 있었다.

• 조명전기설비학회논문지
• /
• 제25권2호
• /
• pp.61-68
• /
• 2011

The circuit breaker of power distribution board is essential part for the protection of electrical disaster from load short, trouble of power system. For the normal operation of circuit breaker, trip coil of the circuit breaker can cut the mechanical contact of circuit breaker from the detection of power system troubles. This paper presents a design and experimental results of trip coil fault detection system for the real time monitoring of the circuit breaker. The designed system is consisted by the trip coil fault detector which is connected to the each circuit breaker and remote monitoring unit. The trip coil fault detector can detect the impedance and operating voltage of the trip coil, and the detected values are compared with the normal state. And the remote monitoring unit can be connected to the 32 channels of trip coil fault detectors by serial communication. From the designed system, the fault and normal states of the trip coil can be remotely monitored in real time. The designed system is verified by the practical circuit breaker of power distribution board. And the results shows the effectiveness of the designed system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(4)
• /
• pp.163-166
• /
• 2000

Real-time traffic detection scheme based on Computer Vision is capable of efficient traffic control using automatically computed traffic information and obstacle detection in moving automobiles. Traffic information is extracted by segmenting vehicle region from road images, in traffic detection system. In this paper, we propose the advanced segmentation of vehicle from road images using multiple local region information. Because multiple local region overlapped in the same lane is processed sequentially from small, the traffic detection error can be corrected.

• 전기학회논문지P
• /
• 제58권3호
• /
• pp.241-248
• /
• 2009

This paper presents stochastic methodology based fault detection algorithm for induction motor systems. We measure current of healthy induction motors by means of hall sensor systems and then establish its probability distribution. We propose online probability density estimation which is effective in real-time implementation due to its simplicity and low computational burden. In addition, we accomplish theoretical analysis of the proposed estimation to demonstrate its convergence property by using statistical convergence and system stability theories. We apply our fault detection approach to three-phase induction motors and achieve real-time experiment for evaluating its reliability and practicability in industrial fields.