• 한국철도학회논문집
• /
• 제10권5호
• /
• pp.487-491
• /
• 2007

고속철도 건설시, 선로 중심 간격 및 시공기면폭의 감소는 건설비용의 절감을 가져온다. 그러나, 선로 중심 간격의 축소는 열차 주행 풍압의 증가의 여러가지 안전성 문제를 야기할 수 있으므로 기술적 검토와 공기역학적 연구가 수행되어야 한다. 본 연구에서는 호남 고속철도에 적합한 선로 중심간격을 검토하는데 필요한 차량 주행 안정성을 해석하기 위하여 선로 중심간격 변화로 인한 교행 열차 풍압을 예측하였으며, 이를 실차 실험 결과를 토대로 공력영향을 평가하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(II)
• /
• pp.1029-1034
• /
• 2002

Object of this paper are numerical and experimental evaluation of Korean Standard Train Loading(L-loading scheme) with respect to UIC's and real train loading, quantitative formulation of the real train types in South Korea. These objects are require to changing environment of train operation, for example, high density traffic and gradual train speed increase. For the reasonable repair, reinforcement and rehabilitation of existing railway infrastructures, statistical analysis of the loading effect during the long term experiment in conventional lines have to conduct. Statistical quantitative formulation of the loading case need to consistency numerical evaluation of the railway safety. Hereafter, those results will be core technical data for the economy enhancement of international line construction. Further, these results are using to make track maintenance criterions for transcontinental, speed up railway and revision of standard train leading diagram.

• 제어로봇시스템학회논문지
• /
• 제9권1호
• /
• pp.44-49
• /
• 2003

This paper describes a method of estimating miniature train location by color vision for development of an intelligent railway system model. In the teal world, to control trains automatically, GPS(Global Positioning System) is indispensable to determine the location of trains. A color vision system was used for estimating the location of trains in an indoor experiment. Two different rectangular color bars were attached to the top of each train as a means of identifying them. Several trains were detected where they were located on the track by color feature, geometric features and moment invariant, and tracked simultaneously. In the experiment the identity, location and direction of each train were estimated and transferred to the control computer using serial communication. Processing speed of up to 8 frames/sec could be achieved, which was enough speed for the real-time train control.

• Journal of Computational Design and Engineering
• /
• 제1권4호
• /
• pp.233-242
• /
• 2014

A magnetically levitated vehicle (Maglev) system is under commercialization as a new transportation system in Korea. The Maglev is operated by an unmanned automatic control system. Therefore, the plan of train operation should be carefully established and validated in advance. In general, when making a train operation plan, statistically predicted traffic data is used. However, a traffic wave often occurs in real train service, and demand-driven simulation technology is required to review a train operation plan and service quality considering traffic waves. We propose a method and model to simulate Maglev operation considering continuous demand changes. For this purpose, we employed a discrete event model that is suitable for modeling the behavior of railway passenger transportation. We modeled the system hierarchically using discrete event system specification (DEVS) formalism. In addition, through implementation and an experiment using the DEVSim++ simulation environment, we tested the feasibility of the proposed model. Our experimental results also verified that our demand-driven simulation technology can be used for a priori review of train operation plans and strategies.

• International Journal of Railway
• /
• 제1권4호
• /
• pp.169-174
• /
• 2008

Experimental study has been conducted to clarify the internal and external pressure variation characteristics for KTX(Korea Train eXpress) passing through tunnel. Abrupt pressure variation gives rise to the ear-discomfort for passenger and fatigue for car body. In this study, the internal and external pressure variation are measured by using KTX real train experiment and on-board portable data acquisition system in Gyeongbu high speed commercial line. The tunnels from 200 m to 4000 m in length are chosen for the investigation of tunnel length effects. From the results of experiment, the internal pressure variation rate for all the test tunnels is lower than the standard criteria of 200 Pa/s. And, the critical tunnel lengths for pressure wave pattern are classified into 7 groups by using the theoretical L-t diagram analysis.

• 전기학회논문지
• /
• 제63권9호
• /
• pp.1286-1293
• /
• 2014

Typically, studies through the simulation system have been progressed, because the evaluation of the driver's arousal state about the service of a actual train has risk of safety for the driver. When configured event same as the real in simulation system, the ability to cope with an accident situation may be the same each other. But the difference in the state of tension or arousal will occur. In this study, requested to cooperate with the railways in order to escape from these constraints, and the target of the experiment was to real engineer service. I was set about experiment when the train was stopped as safe as possible. As a result, the beta wave of EEG signals that representing complex calculations or anxiety is increased rapidly on the basis of a flag station from at the time of departure. The size of the electrodermal activity signal in response to movement of the body gave a noticeable. In terms of HRV, if the train approach a flag station gradually and the R-R interval is narrowed. So that the driver can be estimated as arousal state. In accordance with this study, if the quantitative standard of arousal state be based on the driver's biosignals will provide, it will be able to take advantage of development the system that would prevent train accidents caused by human error.

• 한국안전학회지
• /
• 제28권4호
• /
• pp.1-7
• /
• 2013

Train accidents can be directly connected to fatal accidents-collision, derailment, Fire, railway crossing accidents-resulting in tremendous human casualties. First of all, the railway derailment is not only related to most of railway accidents but also it can lead to much more catastrophic accompanying train overtured than other factors. Therefore, it is most important factor to ensure railway safety. some foreign countries have applied to the detector machines(e.g., ultrasonic detector car, sleep mode, current detector, optical sensing, optical fiber). Since it was developed in order to prevent train from being derailed. In korea, the existing track method has been used to monitor rail condition using track circuit. However, we found out it impossible for Communication Based Train Control system(CBTC), recent technology to detect rail condition using balise(data transmission devices) without no track circuit. For this reason, it is needed instantly to develop real-time monitoring system used to detect broken rails. Firstly, this paper presents domestic and international statues analysis of rail breaks technology. Secondly, the composition and the characteristics of the real-time monitoring system. Finally, the evidence that this system could assumed the location and type of broken rails was proved by the experiment of prototype and operation line tests. We concluded that this system can detect rail break section in which error span exist within${\pm}1m$.

• 한국정밀공학회지
• /
• 제22권1호
• /
• pp.160-166
• /
• 2005

In this paper, the combined system equation of motion, which can analyze the dynamic interaction between pantograph and catenary system, is derived by adopting absolute nodal coordinates and rigid body coordinates. The analysis results are compared with real experiment data from test running of Korean high-speed train (HSR 350x). In addition, a computation method for the dynamic stress of contact wire is presented using the derived system equation of motion. This method might be good example and significant in that the structural and multibody dynamics model can be unified into one numerical system.

• 한국철도학회논문집
• /
• 제19권3호
• /
• pp.271-279
• /
• 2016

팬터그래프의 공력소음은 열차가 고속으로 주행할 때 발생하는 소음의 주요한 원인이다. 본 연구에서는 팬터그래프에 의한 공력소음 기여도를 분석하기 위하여 차세대고속열차(HEMU-430X)를 이용하여 시험을 수행하였다. 실제차량에서의 팬터그래프에 의한 소음의 주파수 특성을 분석하기 위하여, 350km/h와 400km/h 주행 시 전체차량의 음장가시화를 144채널 마이크로폰 어레이를 이용하여 수행하였다. 음장가시화 분석결과 팬터그래프의 소음은 250~400Hz 대역의 저주파 소음이 주로 기여함을 확인하였다. 또한 팬터그래프의 소음 기여도를 분석하기 위하여 팬터그래프의 올림 및 내림 시 소음도 차이를 단일 마이크로폰 시험을 통하여 비교분석하였다. 단일 마이크로폰 시험을 통한 팬터그래프 소음의 주요 주파수 특성은 315~400Hz와 1000~1250Hz 대역임을 확인 하였으며 이는 기존의 연구 결과 및 음장가시화 결과와 잘 일치하였다.

• 한국방재학회 논문집
• /
• 제8권4호
• /
• pp.53-59
• /
• 2008

지하철터널에서 화재가 발생하면, 열차는 가장 가까운 정거장으로 대피하여 승객들을 하차시켜야 한다. 실제로 대구지하철 화재사고가 이러한 방식으로 대응 하였으나 큰 인명 피해를 초래하였다. 지하철 정거장의 화재배연시스템은 열차화재에 대응할 수 있도록 설계되어 있지 않기 때문에 화재열차의 정거장 진입시 예상치 못한 피해를 유발할 수 있으며 피해방지를 위한 정거장 선로부의 배연계획 수립이 필요하다. 본 연구의 목적은 정거장 선로부의 열차화재시 효율적인 배연방식을 연구하고 승객의 피난 동선 확보를 위해 상층부로의 역류 방지대책을 축소모형실험에 의하여 수립하는 것이다.