• 한국정보통신학회논문지
• /
• 제11권6호
• /
• pp.1207-1213
• /
• 2007

기존의 수도설비의 밸브실과 유량계의 관리는 기계적이고 숙련자의 경험적인 방식으로 이루어져 왔다. 그러나 USN 기반의 실시간 수도설비 모니터링 시스템을 활용한 시설물 관리는 안전성과 정확성을 제공함으로서 양질의 수자원을 관리하는데 기술적인 발전을 가져올 수 있다. 따라서 본 연구는 USN(Ubiquitous Sensor Network)과 CDMA(Code Division Multiple Access) 망을 이용한 수도 시설물의 안전 관리 시스템에 관하여 연구하였다. 수도 설비 중에서 밸브실과 유량계실을 대상으로 유량계, 압력센서, 진동센서, Co센서, 온 습도센서들의 RFID(Radio-frequency identification) 센서로 구성된 USN을 구성하고, USN으로부터 실시간으로 수도 시설물 정보 및 수(水)처리 측정 정보를 수집하여, CDMA망을 통해 원거리 관제 시스템에 전송한다. USN 기술을 이용하여 수도설비를 관리함으로서 현장에서의 편리성, 안전성, 정확성을 높여 더욱 효율적이고 안정적으로 깨끗한 수돗물을 공급하는데 기여할 수 있다.

• 제어로봇시스템학회논문지
• /
• 제6권10호
• /
• pp.911-917
• /
• 2000

As many sensors and actuators are used in various automated systems, the application of network to real-time distributed control system is gaining acceptance in many industries. In order to take advantages of networking, however, the network should be carefully designed to satisfy real-time distributed control. This paper presents an implementation method of closed-loop control using Profibus-FMS. In order to implement a closed-loop control system, we used industrial computers with Profibus-FMS network cards and a DC servo motor. Through various experiments, the step response of the control system with network was compared with the reference response without network.

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.120-129
• /
• 2001

As many sensors and actuators are used in many automated systems, various industrial networks are adopted for real-time distributed control. In order to take advantages of the networking, however, the network implementation should be carefully designed to satisfy real-time requirements considering network delays. This paper presents the implementation of a remote feedback control system via Profibus-DP net work for real-time distributed control More specifically, the effect of the network delay on the control performance evaluated on Profibus-DP testbed. Also, the traditional PID gain tuning methods are used to demonstrate the feasibility of the remote feedback control.

• International Journal of Internet, Broadcasting and Communication
• /
• 제8권1호
• /
• pp.64-68
• /
• 2016

These fields are integrated to visualize and finalize the proposed development, in simulation environment. SCADA (supervisory control and data acquisition) systems and distributed control systems (DCSs) are widely deployed in all over the world, which are designed to control the industrial infrastructures, in real ways. To supervise and control the various parts of designed systems; trends to require a deep knowledge to understand the overall functional needs of industries, which could be a big challenge. Industrial field devices (or network sensors) are usually distributed in many locations and are controlled from centralized site (or main control center); the communication provides various signs of security issues. To handle these issues, the research contribution will twofold: a method using cryptography is deployed in critical systems for security purposes and overall transmission is controlled from main controller site. At controller site, multimedia components are employed to control the overall transmission graphically, such as system communication, bytes flows, security embedded parameters and others, by the means of multimedia technology.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.491-494
• /
• 2002

The real-time industrial network often referred to as fieldbus, is an important element for building automated manufacturing systems. Thus, in order to satisfy the real-time requirements of field devices such as sensors, actuators, and controllers. numerous standard organizations and vendors have developed various fieldbus protocols such as Profibus, WorldFIP and Foundation Fieldbus. However, the application of fieldbus has been limited due to the high cost of hardware and the difficulty in interfacing with multi-vendor products. In order to solve these problems, the computer network technology, especially Ethernet (IEEE 802.3), is being adopted lo the industrial environment. The crucial technical obstacle for Ethernet is that its non-deterministic behavior makes it inadequate for industrial applications where real-time data such as control command and alarm signal hale to be delivered within a certain time limit. Recently, the development of switched Ethernet shows a very promising prospect for industrial application due to the elimination of uncertainties in the network operation resulting in much improved performance. This paper focuses on the application of the switched Ethernet for industrial comm unications.

• 제어로봇시스템학회논문지
• /
• 제16권4호
• /
• pp.403-410
• /
• 2010

The switched Ethernet has many features for real-time communications such as providing traffic isolation, large bandwidth, and full-duplex links, and so on. The switched Ethernet, however, cannot guarantee the timely delivery of a real-time message because message delay increases when collisions occurs at the output ports and message loss can even occur due to the overflow at the output buffer. Recently, many research efforts have been done to use the switched Ethernet as an industrial control network. In the industrial control network, sensors periodically sense the physical environment and transmit the sensed data to an actuator, and the periodic messages from sensors to actuators have typically real-time requirements such that those messages must be transmitted within their deadlines. This paper first suggests a feasible condition for EDF (Earliest Deadline First)-based scheduling of periodic messages on a synchronized switched Ethernet and a message scheduling algorithm which satisfies the proposed feasible condition. Pedreiras, et al. [10] suggested a feasible condition for message scheduling on the Ethernet (shared media Ethernet), but there has been no research result on the scheduling condition on the switched Ethernet until now. We compared the real-time message scheduling capacity between the Ethernet and the switched Ethernet by simulation. The simulation result shows that the message scheduling capacity of the Ethernet has almost remained constant as the number of nodes on the network increases, but, in the case of the switched Ethernet, the message scheduling capacity has increased linearly according to the number of nodes on the network.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2461-2466
• /
• 2003

This paper presents a simple sensor fusion algorithm using neural network for navigation of mobile robots with obstacle avoidance and trap recovery. The multiple sensors input sensor data to the input layer of neural network activating the input nodes. The multiple sensors used include optical encoders, ultrasonic sensors, infrared sensors, a magnetic compass sensor, and GPS sensors. The proposed sensor fusion algorithm is combined with the VFH(Vector Field Histogram) algorithm for obstacle avoidance and AGPM(Adaptive Goal Perturbation Method) which sets adaptive virtual goals to escape trap situations. The experiment results show that the proposed low-level fusion algorithm is effective for real-time navigation of mobile robot.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.77-79
• /
• 2004

Because robot hardware architecture generally is consisted of a few sensors and motors connected to the central processing unit, this type of structure is led to time consuming and unreliable system. For analysis, one of the fundamental difficulties in real-time system is how to be bounded the time behavior of the system. When a distributed control network controls the robot, with a central computing hub that sets the goals for the robot, processes the sensor information and provides coordination targets for the joints. If the distributed system supposed to be connected to a control network, the joints have their own control processors that act in groups to maintain global stability, while also operating individually to provide local motor control. We try to analyze the architecture of network-based humanoid robot's leg part and deal with its application using the CAN(Controller Area Network) protocol.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2531-2533
• /
• 2002

In this paper, we evaluate feasibility of an object-oriented method in a distributed real-time control environment through the prediction of delay expected. We adopt CAN as the distributed network and the application layer of the CAN is composed of client/server communication model of COM and surroundings for the support of real-time capability of the COM. Mathematical models formalizing delays which are predicted to invoke in the COM architecture are proposed. Sensors and actuators which are widely used in distributed network-based systems are represented by COM objects in this paper. It is expected that the mathematical models can be used to protect distributed network-based systems from violation of real-time features by the COM.

• International journal of advanced smart convergence
• /
• 제3권2호
• /
• pp.14-17
• /
• 2014

Precision agriculture relies on information technology, whose precondition is providing real-time and accurate information. It depends on various kinds of advanced sensors, such as environmental temperature and humidity, wind speed, light intensity, and other types of sensors. Currently, it is a hot topic how to collect accurate information, the main raw data for agricultural experts, monitored by these sensors timely. Most existing work in WSNs addresses their fundamental challenges, including power supply, limited memory, processing power and communication bandwidth and focuses entirely on their operating system and networking protocol design and implementation. However, it is not easy to find the self-localization capability of wireless sensor networks. Because of constraints on the cost and size of sensors, energy consumption, implementation environment and the deployment of sensors, most sensors do not know their locations. This paper provides maximum likelihood estimators for sensor location estimation when observations are time-of arrival (TOA) range measurement.