• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.64-65
• /
• 2017

The existing hot and cold water supply system have a few problems such as construct ability, damage of the building, maintenance and the unequal distribution of water supply flow. So the system has needs to be improved and the Flow Equal Distribution System(FEDS) in series connection has been innovated by Idin Lab which relieve the existing problems. Thus, the purpose of this study is aimed to show the merits of FEDS with an real example of construction site of Wirye Terrace, D builder. 1. FEDS enables builders to save construction cost as the system in series connection does not need to equip both allotters and loop piping system. 2. FEDS contains a cartridge of water saving function so it mainly reduce the unequal distribution of flow and sudden temperature deviation of hot water supply at the same time. 3. FEDS allows repairer to maintain the water supply system at the same floor that could get rid of disharmony between dwellers who live the upper/lower story of the same building. Therefore, the FEDS will be applied when the building is remodeled and constructed.

• 한국지열·수열에너지학회논문집
• /
• 제10권1호
• /
• pp.14-19
• /
• 2014

This paper presents a preliminary experimental and computational study on the evaluation of thermal performance and initial cost of U, W and coil type ground heat exchangers (GHEs). Heat exchange rate of the individual GHE was evaluated from the thermal resperformance test (TPT) results, and the construction cost was also calculated. For more information, GLD (ground loop design) simulations of various piping size are carried out. From simulation results, the optimized GHE was suggested based on the thermal performance and construction cost as well. Besides, the required borehole length of U and W type GHEs was calculated considering a real construction condition using GLD program.

• 설비공학논문집
• /
• 제17권4호
• /
• pp.341-346
• /
• 2005

The simplification of solar thermal systems reduces the possibility of operating trouble and lowers the cost of the initial investment and maintenance. This also leads to increased competitiveness in the energy market. We proposed a spiral-jacketed storage tank that functions both as a heat exchanger and expansion tank, which removes the secondary piping and markedly simplifies the entire system. The new storage tank was designed and manufactured to maintain the same performance as the conventional system and the exiting system was remodelled by adopting the newly proposed storage tank. This experiment was conducted under real conditions over a period of several months. The retrofitted system with the spiral-jacketed storage tank showed good performance that is on a similar level as the previous system having a typical storage tank and heat exchanger.

• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.107-114
• /
• 2005

In order to analyze the elastic-plastic fracture behavior of a structure, the fracture resistance curve of the material should be known first. The standard CT specimen was used to obtain the fracture resistance curves of a piping system. However, it is known that the fracture resistance curve by the standard CT specimen is very conservative to evaluate the integrity of a structure. Also the fracture resistance curve is effected by the specimen geometry and the dimensions because of the constraint effect. The objective of this paper is to be certain the conservativeness of the fracture resistance curve by the standard CT specimen and to provide an additional safety margin. For these, the fracture tests using a real pipe specimen and the standard CT specimen test were performed. A 4-point bending jig was manufactured for the pipe test and the direct current potential drop method was used to measure the crack extension and the length for the pipe test. Also finite element analyses were performed with a CT specimen and a pipe in order to prove the additional safety margin. From the result of tests and analyses of the pipe and the standard CT specimen, it was observed that the fracture analysis with the standard CT specimen is conservative and the additional safety margin was proved.

• 설비공학논문집
• /
• 제26권8호
• /
• pp.351-356
• /
• 2014

Typical trouble patterns in solar thermal systems include working fluid leakage and freezing other than breakdown of pump. A fluid sensor for measuring electric resistance of fluid was developed and installed at the top of the collector piping in order to check the fault of solar system. Working fluid level in the pipe was determined by measuring electric resistance from a fluid sensor. On the base of this, it was confirmed that the fluid sensor diagnoses leakage of fluid. Electric resistance of propylene glycol aqueous solution was measured in the range of $0{\sim}70^{\circ}C$ and 0~40% of concentration. The response surface analysis was performed by using a central composite design, and the regression equation was derived from the relationship between electric resistance, temperature, and concentration. Through the experiment in a real solar system, we can estimate a concentration of working fluid when a pump is not operating and predict a possibility of freezing. Finally, an effective algorithm for trouble shooting was proposed to operate and maintain the solar system.

• 한국수소및신에너지학회논문집
• /
• 제34권6호
• /
• pp.728-733
• /
• 2023

Efforts are continuing to change from fossil fuels used to hydrogen energy society. In order to become a hydrogen society, stable production and real-life applicability are important. As a result, hydrogen generation system linked to fuel cell are being developed. Through this, it is expected that production to power generation will be possible where desired by utilizing the existing urban gas piping network. Hydrogen generation system and hydrogen fuel cell have been subjected to risk assessment and have already been commercialized, but no risk assessment has been conducted on the integrated system linking them. Therefore, it is intended to secure its safety by conducting a risk analysis on the integrated system.

• 한국유체기계학회 논문집
• /
• 제19권4호
• /
• pp.35-38
• /
• 2016

A PFA lined ball valve, which is machined with fluorinated resin PFA to its inner part for improving corrosion resistance, non-stickness, heat-resistance, has been widely used in semiconductor/LCD manufacturing processes with the high purity chemicals as working fluid. Due to the safety concerns, the experiments for measuring the flow coefficient of a PFA lined ball valve should be conducted with water at room temperature according to IEC standards. However, it is required to know the real flow coefficient with the real working fluid, because the flow coefficient is critical to correctly design valves in piping system. In this study, we calculated the flow coefficient of a PFA lined ball valve 40A with hydrochloric acid ($40^{\circ}C$ 36% HCl) as the working fluid using a commercial CFD package, ANSYS CFX v15. The computational results had a good agreement with the measured data and showed a little difference between water and hydrochloric acid as the working fluid of a PFA lined ball valve.

• Korean Chemical Engineering Research
• /
• 제57권1호
• /
• pp.51-57
• /
• 2019

LNG 플랜트의 설비 배치는 안전, 환경과 관련된 법규 및 유지 및 보수 공간, 작업자 이동 통로 등 작업자의 근무환경이나 안전과 관련된 다양한 설계 제약조건을 충족해야 한다. LNG 플랜트 설비 중 가장 중요한 초저온 공정인 액화공정의 경우, 배관 내 유체와 외부 대기와의 온도 차이에 의한 열 손실과 유체 흐름 시 발생하는 압력 손실이 발생하기 때문에 가능한 설비 간 배관 길이는 짧을수록 유리하다. 따라서, 액화 공정을 건설할 때 다양한 제약조건을 만족하면서 배관의 길이를 최소로 하는 설비 배치가 이루어져야 하며, 이러한 문제는 수학적 모델링으로 배관의 비용을 목적함수를 만들어 이를 최소화하는 최적화 문제로 다룰 수 있다. 이와 관련된 기존 연구들은 대체로 장치 간 유지 보수에 필요한 최소 공간 확보, 사고 예방을 위한 장치 간 이격거리 등 안전 요소를 간과해 왔다. 또한, 기존 연구는 대체로 개념설계를 이용한 배치를 다루어 왔으며, 이미 건설된 실제 배치 결과와 최적화 결과를 비교하여 배치 최적화 문제가 실제 어느 정도 비용 절감 효과가 있는지 검증한 내용은 전무한 실정이다. 본 연구에서는 작업자의 근무나 안전과 관련된 장치 간 이격거리와 유지 보수와 관련된 제약조건 식을 세우고 장치를 연결하는 파이프의 총 비용을 목적함수로 하는 MILP(Mixed Integer Linear Programming) 형태의 문제를 설계하였다. 하지만, 식이 복잡하고 공정 특성에 따라 다양한 제약조건을 추가해야 하는 경우가 있으므로 목적함수의 미분식을 이용하여 푸는 기존의 최적화 방법론으로 풀기에는 많은 어려움이 있다. 따라서, 본 연구에서는 목적함수의 미분식 없이 최적해를 찾을 수 있는 PSO (Particle Swarm Optimization)를 이용하여 최적화를 수행하였다. 실제로 가동 중인 C3MR (Propane precooling Mixed Refrigerant) 공정에 대한 최적화를 수행하여, 본 연구에서 제안한 방법이 어느 정도 효과가 있는지 검증하였다.

• 시스템엔지니어링학술지
• /
• 제13권2호
• /
• pp.49-56
• /
• 2017

Implementation of Model-based Systems Engineering(MBSE) depends on a model supporting efficient communication among engineers from various domains. And SysML is designed to create models supporting MBSE but unfortunately, SysML itself is not practical enough to be used in real-world engineering projects. SysML is designed to express generic systems and requires specialized knowledge, so a model written in SysML is less capable of supporting communication between a systems engineer and a sub-system engineer. Domain Specific Languages(DSL) can be a great solution to overcome the weakness of the standard SysML. A SysML based DSL means a customized SysML for a specific engineering domain. Unfortunately, current researches on SysML Domain Specific Language(DSL) for the plant engineering industry are still on the early stage. So as the first step, we have developed our own SysML based Piping & Instrumentation Diagram (P&ID) creation environment and P&ID itself of a specific plant system, using a widely used SysML authoring tool called MagicDraw. P&ID is one of the most critical output during the plant design phase, which contains all information required for the plant construction phase. So a SysML based P&ID has a great potential to enhance the communication among plant engineers of various disciplines.

• 복식문화연구
• /
• 제15권5호
• /
• pp.902-915
• /
• 2007

This study examines decorative features found in the traditional costume of the Miao, one of the minority groups in China, and adapts them for the development of modern Korean-style fashion designs in order to present visual sample data and to introduce techniques. As for the research method, both literature and visual data are examined: the former includes Miao-related books and theses; the latter, pictures from various documents and real-life data in the possession of Seoul Women's University. The study result is as follows: 1. The basic structure of Miao costume is consist of a Caftan-type upper garment and an accentuated lower garment, pleats skirt although they are decorated luxuriously with various techniques such as delicate embroidery and dyeing. 2. Details and trimmings in modern shapes are developed and presented by adding modern materials to satin, twists, cross-stitch embroidery, stripe patterns, geometrical patchwork, machine pleats and smoking, trimmings of fringe & feather, and the border line decoration of coloration, braids, piping, embroidery, belts tied and wound with colorful threads. 3. Detachable accessaries such as front reinforcement strips, back reinforcement strips, belts, decorative aprons and patchwork skirts are developed and designed by adapting highlighted layered effects. 4. The silver decoration used as an necessary by the Miao is suitable for modern fashion design in futuristic sense. Various techniques and decorative features of Miao costume display their true value all the more in modern fashion stream in which ethnic trends draw much attention.