• 한국압력기기공학회 논문집
• /
• 제12권2호
• /
• pp.50-57
• /
• 2016

The study presents structural integrity assessment of ductility degradation of a baffle former assembly by performing finite element analysis considering real loading conditions and stress triaxiality. Variations of fracture strain curves of type 304 austenitic stainless steel with stress triaxiality are derived based on the previous study results. Temperature distributions during normal operation such as heat-up, steady state, and cool-down are calculated via finite element temperature analysis considering gamma heating and heat convection with reactor coolant. Variations of stress and strain state during long operation period are also calculated by performing sequentially coupled temperature-stress analysis. Fracture strain is derived by using the fracture curve and the stress triaxility. Finally, variations of ductility degradation damage indicator with the fracture strain and the equivalent inelastic strain are investigated. It is found that maximum value of the ductility degradation damage index continuously increases and becomes 0.4877 at 40 EFPYs. Also, the maximum value occurs at top and middle inner parts of the baffle former assembly before and after 20 EFPYs, respectively.

• 한국압력기기공학회 논문집
• /
• 제12권1호
• /
• pp.11-16
• /
• 2016

Fuel assembly's mechanical characterization test facility (FAMeCT) in KAERI was constructed with upgraded functional features such as increased loading capacity, underwater vibration testing and severe earthquake simulation for extended fuel design guideline. This facility is designed and developed to provide out-pile fuel data for accident analysis model and fuel licensing. Functional tests of FAMeCT were performed to confirm functionality, structural integrity, and validity of newly-built fuel assembly mechanical test facility. Test program includes signal check of data acquisition system, load delivering capacity using real-sized fuel assemblies and a standard loading cylindrical rigid specimen. Fuel assembly's lateral bending test was carried out up to 30 mm of pull-out displacement. Limit case axial compression loading test up to 33 kN was performed to check structural integrity of UCPS (Upper Core Plate Simulator) support frame. Test results show that all test equipment and measurement system have acceptable range of alignment, signal to noise ratio, load carrying capacity limit without loss of integrity. This paper introduces newly constructed fuel assembly's mechanical test facility and summarizes results of functional test for the mechanical test equipment and data acquisition system.

• 한국압력기기공학회 논문집
• /
• 제5권2호
• /
• pp.13-19
• /
• 2009

As the operating time in nuclear power plants (NPPs) increases, the integrity of nuclear components may be continually degraded due to aging effects of systems, structures and components. Recently, a number of NPPs are being operated beyond their design life to produce more electricity without shutting down. The critical issue in extending a lifetime is to maintain the level of safety during the extended operation period while satisfying the international regulatory standards. Therefore, it is beneficial to build a monitoring system to measure an aging status. In this paper, the Aging Monitor (AM) based on lots of aging database obtained from the operating plants and research results on the aging effects was developed to monitor, manage and evaluate the aging phenomena systematically and effectively in NPPs. The AM for the CANDU is divided into 6 modules: (1) Aging Alarm/Coloring Monitor, (2) Aging Database, (3) Aging Document, (4) Real-time Integrity Monitor, (5) Surveillance and Inspection Management System, and (6) Continued Operation and Periodic Safety Review (PSR) Safety Evaluation. The proposed system is expected to provide the integrity assessment for the major mechanical components of an NPP under concurrent working environments.

• 한국소음진동공학회논문집
• /
• 제21권8호
• /
• pp.733-740
• /
• 2011

This paper deals with the process to identify the transient exciting force generated from a rotary compressor. The compressor was assumed to be a rigid body. The equation of motion of a rigid compressor supported by three mounts was derived with 6 degree-of-freedom. The exciting forces at the center of mass of the compressor were estimated from the acceleration data measured at compressor shell. Compressor-pipe system was modeled numerically. The accelerations of compressor and pipe were predicted numerically by using the estimated exciting force. A new shape of pipe model was proposed to reduce the vibration. In the prediction by the method in this paper, the maximum acceleration of the pipe could be reduced by 53.7 % at the steady-state and by 12 % at the transient process. In the real experiments, the maximum acceleration of the pipe was reduced by 54.2 % at steady-state and 14.7 % at the transient process. It was verified that the numerical results showed good agreement with experimental results.

• 대한조선학회논문집
• /
• 제31권3호
• /
• pp.19-30
• /
• 1994

제품정보의 모델링은 엔지니어링 환경에서, 특히 통합하된 생산시스템의 핵심인 CAD/CAM 시스템의 개발을 위해 매우 중요한 과제가 되어가고 있다. 모델이란 실세계의 개념과 현상에 대한 정형적인 표현의 결과이며, 모델링이란 제품의 관련한 정보를 식별하고 추상화 하여 정형화 하는 작업이다. 본 연구에서는 선박의장시스템의 대표적인 배관시스템을 모델링하였다. 배관시스템 정보의 전주기 정보를 표현하기 위한 메카니즘은 STEP(Standard for the Exchange of Product Model Date)의 개념을 기초로 하였고, 시스템의 분석, 설계 및 구현을 위한 수단으로는 객체지향기술을 이용하였다. 본 연구에서 정의된 배관시스템 모델을 향후 제품모델개념의 배관 CAD/CAM 시스템 구현의 기초가 될 것이다.

• 한국압력기기공학회 논문집
• /
• 제19권1호
• /
• pp.27-35
• /
• 2023

Pressure tubes are the main components of PHWR core and serve as the pressure boundary of the primary heat transport system. However, because pressure tubes have changed their geometrical dimensions under the severe operating conditions of high temperature, high pressure and neutron irradiation according to the increase of operation time, all dimensional changes should be predicted to ensure that dimensions remain within the allowable design ranges during the operation. Among the deformations, the diameter expansion due to creep leads to the increase of bypass flow which may not contribute to the fuel cooling, the decrease of critical channel power and finally the deration of the power to maintain the operational safety margin. This study is focused on the modeling of the expansion of the pressure tube diameter based on the operating conditions and measured diameter data. The pressure tube diameter expansion was modeled using the neutron flux and temperature distributions of each fuel channel and each fuel bundle as well as the measured diameter data. Although the basic concept of the current modeling approach is simple, the diameter prediction results using the developed methodology showed very good agreement with the real data, compared to the existing methodology.

• 한국압력기기공학회 논문집
• /
• 제12권1호
• /
• pp.62-69
• /
• 2016

Current guidance considers that uniaxially loaded specimen with a deep crack is used for the determination of the ductile-to-brittle transition temperature. However, reactor pressure vessel is under biaxial loading in real and the existence of deep crack is not probable through periodic in-service-inspection. The elastic stress intensity factor and the elastic-plastic J-integral which were used for crack-tip stress field and fracture mechanics assessment parameters. The difference of the loading condition and crack geometry can significantly influence on these parameters. Thus, a constraint effect caused by differences between standard specimens and a real structure can over/underestimate the fracture toughness, and it affects the results of the structural integrity assessment, consequentially. The present paper investigates the constraint effects by evaluating the master curve $T_0$ reference temperature of PCVN (Pre-cracked Charpy V-Notch) and small scale cruciform specimens which was designed to simulate biaxial loading condition with shallow crack through the fracture toughness tests and 3-dimensional elastic-plastic finite element analyses. Based on the finite element analysis results, the fracture toughness values of a small scale cruciform specimen were estimated, and the geometry-dependent factors of the cruciform specimen considered in the present study were determined. Finally, the transferability of the test results of these specimens was discussed.

• 한국압력기기공학회 논문집
• /
• 제16권2호
• /
• pp.1-9
• /
• 2020

Large-scale industrial facility structures continue to deteriorate due to the effects of operating and environmental conditions. The problems of these industrial facilities are potentially causing economic losses, environmental pollution, casualties, and national losses. Accordingly, in order to prevent disaster accidents of large structures in advance, the necessity of diagnosing structures using non-destructive inspection techniques is being highlighted. The defect occurrence, location and defect type of the structure are important parameters for predicting the remaining life of the structure, so continuous defect observation is very important. Recently, many researchers have been actively researching real-time monitoring technology to solve these problems. Structure Health Monitoring Inspection is a technology that can identify and respond to the occurrence of defects in real time, but there is a limit to check the degree of defects and the direction of growth of defects. In order to compensate for the shortcomings of these technologies, the importance of defect imaging techniques is emerging, and in order to find defects in large structures, a method of inspecting a wide range using guided ultrasonic is effective. The work presented here introduces a calculation for the shape factor for evaluation of the damaged area, as well as a variable β parameter technique to correct a damaged shape. Also, we perform research in modeling simulation and an experiment for comparison with a suggested inspection method and verify its validity. The curved structure image obtained by the advanced RAPID algorithm showed a good match between the defect area and the shape.

• 한국시뮬레이션학회논문지
• /
• 제19권2호
• /
• pp.43-49
• /
• 2010

양식어민의 소득증대와 국제적 경쟁력을 갖춘 고부가가치 수산물 상품화와 소비자의 먹을거리 신뢰성 제고를 목적으로 수행 된 경남 통영시 가두리 양식장의 고품질 수산물 이력추적 시스템 구축 사업은 수산물 유통망의 실시간 이력추적 관리를 위하여 RFID/USN 기술 및 관련 IT 기술을 도입하여 진행하였다. 본 연구에서는 수산물의 실시간 이력추적을 위해 도입된 RFID 기술의 특징 및 그 효과에 대해 알아보고 효율적인 수산물 유통 시스템의 개선을 위한 방안을 제안하며, 유통망 개선에 대한 시뮬레이션을 하고자 한다.

• 비파괴검사학회지
• /
• 제28권2호
• /
• pp.191-198
• /
• 2008

유체가속부식에 의한 탄소강 배관의 감육은 원자력 발전소 저탄소강 배관의 주요 경년열화 현상으로서, 예상치 못한 배관의 파단을 야기해 발전소의 성능 및 안전을 저해할 수 있다. 최근, 등전위 교번식 직류 전위차법(ES-DCPD, equipotential switching direct current potential drop)을 이용한 배관 감육의 정밀 감시기법이 본 연구자들에 의하여 개발되었다. ES-DCPD 방법은 넓은 배관 영역을 빠르게 검사할 수 있는 방법으로, 넓은 영역의 직관부 감육을 빠르게 검사하는 광역감시법(WiRN, wide range monitoring)과 엘보우 등 곡관부의 감육이 활발한 컴포넌트의 국부적 감육을 비교적 넓은 범위에서 빠르게 스캔하는 협역감시법(NaRM, narrow range monitoring)으로 사용이 가능하다. 광역감시와 협역감시 기법은 초음파검사의 위치 선정파 초음파검사의 검사 누락부에 대한 신뢰성을 개선할 수 있을 것이다. 본 논문에서는 ES-DCPD를 바탕으로 한 새로운 감육 진단 기술을 실험실 환경에서 장기 검증 시험을 수행하여 신호 정밀도를 분석하였고, 결과의 현장 적용성을 논의하였다.