• 자원환경지질
• /
• 제48권2호
• /
• pp.147-160
• /
• 2015

2014년 8월 31일~9월 1일 충남 태안 어은리 갯벌 퇴적물의 동일한 실험 장소에서 닫힌 챔버를 이용하여 챔버내 가스들(메탄($CH_4$), 이산화탄소($CO_2$) 및 산소($O_2$))의 갯벌 표면 노출시 일조량이 있는 조석주기의 저조 시점을 기준으로 각 기체의 플럭스량을 파악하기 위해 총 6회 실험하였다. 챔버 내에서 채취된 대기 샘플 중 메탄의 농도는 6시간 이내에 지구온실가스 측정용 EG model GS-23 가스크로마토그래피로 분석하였으며 그 외 가스종은 Multi Gas Monitor를 이용하여 실시간 측정하였다. 각 가스 종들의 배출원(source (+)) 또는 흡수원(sink (-))의 플럭스 계산값은 단순 선형 회귀분석을 이용하여 시간에 따른 각 기체의 농도변화인 1차 함수 기울기 값을 수식에 대입하여 계산하였다. 또한 주변 환경 특성을 참고하기 위해 퇴적물 함수율, 온도, 총유기탄소, 챔버내 온도 및 퇴적물 퇴적상도 측정하였다. 첫째날, 총 3회 플럭스 측정이 진행되는 5시간 20분 동안 이산화탄소는 $-137.00{\sim}-81.73mg/m^2/hr$ 흡수원, 산소는 $-0.03{\sim}0.00mg/m^2/hr$ 흡수원 그리고 둘째날, 이산화탄소는 -20.43~-2.11 mg/m2/hr 흡수원, 산소는 $-0.18{\sim}-0.14mg/m^2/hr$ 흡수원으로 모두 동일하였다. 메탄의 경우 양일간 조석주기의 저조 시점이 되기 전에는 첫째날 $-0.02mg/m^2/hr$ 흡수원(SPSS 통계분석을 이용한 Pearson 상관계수는 뚜렷한 음의 선형관계인-0.555(n=5, p=0.332)) 및 둘째날 $-0.15mg/m^2/hr$ 흡수원(상관계수는 강한 음의 선형관계인 -0.915(n=5, p=0.030))으로 작용하였다. 그리고 저조시점 이후로 메탄은 첫째날 최소 $+0.00mg/m^2/hr$ 배출원(상관계수는 거의 무시될 수 있는 선형관계인 +0.713(n=5, p=0.176)) 및 둘째날 최대 $+0.03mg/m^2/hr$ 배출원(상관계수는 약한 양의 선형관계인 +0.194(n=5, p=0.754))이 된다는 플럭스 양상은 양일간 모두 같았다. 그러나 $CH_4$ 플럭스 값은 일자 및 시간별로 모두 다르게 분석되었다. 이러한 결과는 같은 시간, 동일지역 퇴적물 일지라도 $CH_4$ 플럭스 변화율은 갯벌 근처 해수의 표층 조석주기 특성 이해를 통한 가스 방출 상관관계 및 물리화학적 퇴적물 환경과 같은 주변 변수에 따라 영향을 받음 수 있음을 보여준다.

• 지능정보연구
• /
• 제22권3호
• /
• pp.165-183
• /
• 2016

스마트폰을 넘어 차세대 IT 비즈니스의 주목할 만한 후보군으로 가상현실이 이슈가 되고 있다. 가상현실은 컴퓨터와 VR헤드셋을 통해 구현한 입체적인 가상공간을 제공함으로써 사용자의 시각을 완전히 장악하고, 청각, 촉각 등 오감과의 상호작용 및 음성, 동작인식 등을 통해 가상공간을 마치 현실처럼 느끼게 한다는 점에서 향후 주목할 만한 산업 분야로 떠오르고 있다. 많은 글로벌 대기업들이 가상현실과 관련한 사업에 투자를 하고 있으나 소비자의 관점에서 가상현실 관련 제품군은 아직 쉽게 접하거나 구매하기 어려운 제품군으로 인식된다. 그렇기 때문에 소비자의 태도 변화가 큰 변화가 발생되고 있지 않으며 Acception & Diffusion 모델의 초기단계에 지나지 않아 구매로 연결되지 않는 실정이다. 본 연구는 기존 선행연구의 관점을 바탕으로 가상현실 헤드기어 제품들의 판매 촉진을 위한 사용자 관점에서의 사용자 저항을 매개 변수로 저항을 감소시키고 사용 및 구매의도에 영향을 주는 선행요인들을 도출하고자 하였으며 사용자가 가지고 있는 태도에 대한 자신감에 영향을 주어 행동 의도까지 변화시키는 현상에 대한 분석을 하고자 하였다. 본 연구의 결과는 태도 자신감에 대한 사용 용이성과 사용 혁신성의 영향력을 확인할 수 있었다. 마찬가지로 사용자 혁신저항에 영향력을 주는 변수로는 가격, 심미적 외관, 즐거움, 콘텐츠 및 화질 관련 변수들을 도출하였다. 결과적으로 본 연구는 태도 자신감의 가상현실 혁신 수용에 대한 영향력을 제시하고 가격 이외 변수인 콘텐츠의 양과 저항감의 관계성을 바탕으로 관련 변수들을 제시하였다. 특히 초기 시장인 가상현실 제품의 특성에 따라 브랜드에 대한 선점효과의 필요성과 콘텐츠의 부족함 등이 실무적으로 해결해야 할 과제로서 확인되었다.

• Asia pacific journal of information systems
• /
• 제17권4호
• /
• pp.31-59
• /
• 2007

We frequently use search engines to find relevant information in the Web but still end up with too much information. In order to solve this problem of information overload, ranking algorithms have been applied to various domains. As more information will be available in the future, effectively and efficiently ranking search results will become more critical. In this paper, we propose a ranking algorithm for the Semantic Web resources, specifically RDF resources. Traditionally, the importance of a particular Web page is estimated based on the number of key words found in the page, which is subject to manipulation. In contrast, link analysis methods such as Google's PageRank capitalize on the information which is inherent in the link structure of the Web graph. PageRank considers a certain page highly important if it is referred to by many other pages. The degree of the importance also increases if the importance of the referring pages is high. Kleinberg's algorithm is another link-structure based ranking algorithm for Web pages. Unlike PageRank, Kleinberg's algorithm utilizes two kinds of scores: the authority score and the hub score. If a page has a high authority score, it is an authority on a given topic and many pages refer to it. A page with a high hub score links to many authoritative pages. As mentioned above, the link-structure based ranking method has been playing an essential role in World Wide Web(WWW), and nowadays, many people recognize the effectiveness and efficiency of it. On the other hand, as Resource Description Framework(RDF) data model forms the foundation of the Semantic Web, any information in the Semantic Web can be expressed with RDF graph, making the ranking algorithm for RDF knowledge bases greatly important. The RDF graph consists of nodes and directional links similar to the Web graph. As a result, the link-structure based ranking method seems to be highly applicable to ranking the Semantic Web resources. However, the information space of the Semantic Web is more complex than that of WWW. For instance, WWW can be considered as one huge class, i.e., a collection of Web pages, which has only a recursive property, i.e., a 'refers to' property corresponding to the hyperlinks. However, the Semantic Web encompasses various kinds of classes and properties, and consequently, ranking methods used in WWW should be modified to reflect the complexity of the information space in the Semantic Web. Previous research addressed the ranking problem of query results retrieved from RDF knowledge bases. Mukherjea and Bamba modified Kleinberg's algorithm in order to apply their algorithm to rank the Semantic Web resources. They defined the objectivity score and the subjectivity score of a resource, which correspond to the authority score and the hub score of Kleinberg's, respectively. They concentrated on the diversity of properties and introduced property weights to control the influence of a resource on another resource depending on the characteristic of the property linking the two resources. A node with a high objectivity score becomes the object of many RDF triples, and a node with a high subjectivity score becomes the subject of many RDF triples. They developed several kinds of Semantic Web systems in order to validate their technique and showed some experimental results verifying the applicability of their method to the Semantic Web. Despite their efforts, however, there remained some limitations which they reported in their paper. First, their algorithm is useful only when a Semantic Web system represents most of the knowledge pertaining to a certain domain. In other words, the ratio of links to nodes should be high, or overall resources should be described in detail, to a certain degree for their algorithm to properly work. Second, a Tightly-Knit Community(TKC) effect, the phenomenon that pages which are less important but yet densely connected have higher scores than the ones that are more important but sparsely connected, remains as problematic. Third, a resource may have a high score, not because it is actually important, but simply because it is very common and as a consequence it has many links pointing to it. In this paper, we examine such ranking problems from a novel perspective and propose a new algorithm which can solve the problems under the previous studies. Our proposed method is based on a class-oriented approach. In contrast to the predicate-oriented approach entertained by the previous research, a user, under our approach, determines the weights of a property by comparing its relative significance to the other properties when evaluating the importance of resources in a specific class. This approach stems from the idea that most queries are supposed to find resources belonging to the same class in the Semantic Web, which consists of many heterogeneous classes in RDF Schema. This approach closely reflects the way that people, in the real world, evaluate something, and will turn out to be superior to the predicate-oriented approach for the Semantic Web. Our proposed algorithm can resolve the TKC(Tightly Knit Community) effect, and further can shed lights on other limitations posed by the previous research. In addition, we propose two ways to incorporate data-type properties which have not been employed even in the case when they have some significance on the resource importance. We designed an experiment to show the effectiveness of our proposed algorithm and the validity of ranking results, which was not tried ever in previous research. We also conducted a comprehensive mathematical analysis, which was overlooked in previous research. The mathematical analysis enabled us to simplify the calculation procedure. Finally, we summarize our experimental results and discuss further research issues.

• Child Health Nursing Research
• /
• 제5권1호
• /
• pp.70-83
• /
• 1999

The birth of a premature infant is distressing for its parents. The parents of a premature infant experience stress according to the infant's physical appearance and behavior, the environment of the neonatal intensive care unit (NICU) , and the alteration in the parental role. Especially, a mother of a premature infant feels distressed even after the discharge of the infant : therefore, she has difficulties in maternal role performance. The main purpose of this study is to identify the effects of the planned infant care information program in order to lower the stress level for mothers of premature infants caused by the birth and hospitalization in NICU of premature infants, to reduce the maternal role strain, and to promote the maternal role performance after the infants' discharge. This study employed two methods of research at the same time : quasi -experimental non-equivalent pre and post test to compare : non-equivalent post test to compare. The total number of subjects was 19 who were assigned to the research program : 12 mothers of premature infants at the NICU at the Ch university hospital and 7 at the NICU at the Y general hospital located in Chounju city. The data were collected for 79 days from August 18 to November 5, 1998. The questionnaire method was applied for the data collection, and the measures used in this study were Parental Stressor Scale : NICU(Miles, 1993), the Maternal Role Strain Measures ( Hobbs, 1968 ; Steffensmeier, 1982) , and Self Confidence Scale (Pharis, 1978). Research procedure is as follows : after preliminary examination, the experimental subjects, the mothers of premature infants at the Nl CU at Ch university hospital were provided with slide films and information developed by the researcher based on existing documents and data. It took two 60-minute sessions a week for two weeks, and the mothers' stress level was measured using the same instrument twice one week and two week after the infants' hospitalization. The stress level of the contrast subjects, the mothers at Y general hospital was measured during the same period. The experimental subjects were provided with booklets on matters that require attention after the infants' discharge and on developmental project, and they were educated to play the maternal role in person for 2-3 hours a week : breast-feeding, burping a baby, and changing diapers. One week after the infants' discharge, the maternal role strain and the maternal role performance were examined in two groups of the subjects. The analysis of collected data was done using descriptive statistics including real numbers, percentages, averages, and standard deviations. Mann-Whitney test ; x² test ; Repeated Measures Analysis of Variance ; ANCOVA Spearman's rho correlation coefficients. The results on this study were as follows. (1) The examination of the same quality showed that there were no differences in the general and obstetrical characters between the two groups. However, in terms of the characters of premature infants. just right after their birth, the infants at the contrast group weighed more than those at the experimental group(U=16.5, p=.02), and the former was in mother's womb longer than the latter(U=15.5, p=.02). (2) The stress level of the mothers provided with the plannned nursing intervention program became lower as time passed compared to the others'(F=16.61, p=.00) Even when the influence of weight at birth and the length of gestation was removed among the premature infants' characters, the mothers' stress levels made a statistical difference 2 weeks after the infants' hospitalization depending on treatment (F=8.00, p=.01) (3) The maternal role strain of the mothers provided with the planned nursing intervention program was lower than the others'(U=2.0, p=.00). Even when the influence of weight at birth and the length of gestation was removed among the premature infants' characters, the maternal role strain levels made a statistical difference 2 weeks after the infants' hospitalization, depending on treatment(F=14.72, p=.00). (4) The maternal role performance level of the mothers provided with the planned nursing program was higher than the others'(U=.0, p=.00). Even when the influence of weight at birth and the length of gestation was removed among the premature infants' characters, the mothers' stress levels made a statistical difference 2 weeks after the infants' hospitalization, depending on treatment(F=8.00, p=.01). (5) The correlation between a mother's stress level 2 weeks after her infant's hospitalization, the maternal role strain and the maternal role performance were compared : the stress and the maternal role strain were statistically irrelevant to each other(r=.33, p=.12) : the stress was found to be in inverse proportion to the maternal role performance(r=-.53, p=.02). The maternal role strain was in inverse proportion to the maternal role performance as well(r=-.50, p=.00). In conclusion, for the mothers provided with the planned nursing intervention program, their stress level was getting lower as time passed during the infants' hospitalization, their maternal role strain reduced when they took care of their infants after their discharge, and their maternal role performance level was high compared to the other mothers. Besides, the lower the stress level of mothers of premature infants was during the infants' hospitalization, the higher the maternal role performance after their discharge was. The lower maternal role strain was, the higher the maternal role performance was as well. These results of the study suggested that the nursing intervention program for the mothers of premature infants developed by the researcher would be effectively applied to nursing practice, and it would be a foundation for the development of this kind of program.

• 한국직업건강간호학회지
• /
• 제13권1호
• /
• pp.5-18
• /
• 2004

This study aims to investigate the use state of the health service computerization system in the occupational nursing field and the occupational nursers' satisfaction level, and provide basic data to promote the development of the health service computerization system for the nursing field. For this study, a questionnaire was provided to 118 occupational nurses who belong to Busan and Gyeongnam branches of KAOHN(Korean Association of Occupational Health Nurses) for 2 months (from Dec. 1, 2002 to Jan. 31, 2003). A tool of Choi Yong-Heui(2000) was used to investigate the satisfaction level of using the health service computerization system. The collected materials were analyzed in real number and percentage, average and standard deviation, t-test and ANOVA by using the SPSS WIN 10.0 program. This study is summarized as follows: 1. The average age was $31.99{\pm}5.58$ old in this study. The married were 54.2%. Participants who graduated from a junior college was 76.9%. The average service period was $4.48{\pm}4.68$ years. In service types, 79.7% of participants served in a health care center. The average service period was $3.22{\pm}2.89$ years. The service place which had 1000 workers or more was 35.6%. 2. Only 20.3% of participants in this study had a computer use education. 3. The field who participants used mostly was communication/internet, $3.29{\pm}.85$ hours in average. 4. 97.1% of occupational fields had computers and peripheral devices: 71.4% in pentium computer, 42.8% in the hard disk capacity of 20-29GB, 60.0% in 15 inch monitors, 86.2% in printers, 18.1% in digital cameras, 12.4% in LAN, and 9.5% in scanners. 80.1% of the occupational fields which were objects of study could use communication. 5. The occupational fields which did not introduced the health service computerization system were 62.8%. The main cause was attributable to entrepreneurs' insufficient recognition 66.6%. 51.5% of the entrepreneurs did not have an introduction plan. 37.2% of participating companies had the health service computerization system. 56.4% of them introduced it since the year 2000. 81.6% of the introduction motivation aimed to the efficiency of health service. The most issue upon introduction was insufficient understanding of a person in charge - 25.6%. The in-house development of the system covered 56.4%. 61.5% of the participants accepted their demands from the first stage of development. The direct effect of computerization showed the increase of 25.9% in the quickness and continuity of service treatment, and 25.9% in the serviceability of statistical treatment. 6. 22.0% of the participants had a computerization system use education. 69.2% of them had a in-house education. An educational method by nurses who used the computerization system was 76.9%. 92.3% of the education was helpful for practical duties. 7. An analysis of the computer use by health service fields showed that the medicine management in a health management field was 15.9%. the work environment measuring management in a work environment filed was 32.9%. the employment. general and special examination management in a heal th management field was 61.1 %. the various reports management in an administrative field was 64%. the health education data preparation management in an educational field was 58.0%. and the medicine and expendables management in an equipment management field was 51.6%. An analysis of the computerization system use showed that the various statistical data manage in a health management field was 13.0%. the work environment measuring management in a health management field was 34.8%. the personal disease management in a health management field was 51.9%. the heal education data preparation management in an educational field was 54.5%. and the equipment management of health care centers in an equipment management field was 52.6%. 8. 31.6% of the participants wanted that health service computerization system would include the generals of health services. 42.4% of the participants thought that first of all. the aggressive interest and investment of employers were required to build the health service computerization system. 9. The participants' satisfaction level on the computerization system use was $3.51{\pm}.57$ points. An analysis by each factor showed $3.62{\pm}.68$ points in a service change factor. $3.15{\pm}.63$ points in a computer program use factor, and $3.45{\pm}.71$ points in a continuous computerization use factor. 10. An analysis of the computerization system use by general characteristics of participants showed that the married (p = .022) had the satisfaction level higher than the unmarried. 11. The satisfaction level of the computerization system use by participants' computer use ability tended to be higher in proportion to the increase of computer use abilities in spreadsheet (F=2.606. p=.048). presentation (F=3.62. p=.012) and communication/internet(F=2.885. p=.0321. Based on the study results mentioned above. I will suggest as follows : The nationwide enlargement and repetition study is required for occupational nurses who serve in occupational nursing fields. The computerization system in a health service field is inferior comparing with other fields. The computerization system standard by business types and characteristics should be prepared through employers's aggressive participation and national support. Therefore various statistical data which occurs in occupational fields will be managed systematically and efficiently. A regular and systematic computer education plan for occupational nurses in charge of health services in the filed is urgently required to efficiently manage and improve the health of on-site workers.

• 지능정보연구
• /
• 제18권3호
• /
• pp.153-169
• /
• 2012

전시회는 새로운 상품이나 서비스를 현재 고객들과 미래의 잠재고객들에게 홍보하기 위해 개최하는 효과적인 마케팅 수단으로 중요하다. 기업들은 전시회에 참여를 통해 현재 고객 및 잠재고객들과 대면접촉을 함으로써 기업의 이미지 제고 및 새로운 판로를 확보할 수 있다. 이처럼 전시회의 경제적 중요성이 커짐에 따라, 전시주최자들은 참여기업 및 참관객을 유치하기 위하여 새로운 IT 기술을 전시회에 적용하고 있을 뿐만 아니라 연구자들 또한 참관객의 관람패턴을 분석하기 위하여 다양한 연구를 시도하고 있다. 최근에는 스마트 기술이 발전함으로써 전시 공간 내에서 참관객의 활동을 실시간으로 모니터링 할 수 있어 온라인 전시환경처럼 오프라인 전시회를 방문한 참관객의니즈를 실시간으로 추론하여 참관객의 선호에 적합한 서비스를 제공하기 위한 부스 추천시스템에 대한 연구가 활발히 진행되고 있다. 그러나 새로운 기술 개발 측면에서 시스템의 성능을 개선하려는 연구는 지속적으로 진행되어 왔으나 향후 시스템의 개발 방향 및 보급 활성화에 영향을 미치는 요인에 관한 연구들이 부족한 실정이다. 부스 추천시스템은 스마트 전시환경에서 새로 도입되는 기술로 부스 추천시스템에 대한 참관객의 수용 후 재사용 의도는 TAM 관점보다는 부스 추천시스템이 참관객의 선호에 적합한 추천정보를 제공하는가에 초점을 맞출 필요가 있다. 따라서, 본 연구에서는 기존 문헌 고찰을 통해 전시환경에서의 부스 추천시스템에 대한 참관객의 만족 및 재사용 의도에 영향을 주는 요인을 도출하여 연구모형을 설계하였다. 이를 통해 향후 스마트 전시환경에서 부스 추천시스템의 개발과 보급 전략에 있어 유용한 시사점을 제공하고자 하였다. 이러한 연구목적을 달성하기 위하여 2011년 11월 DMC 컬처 오픈 행사에서 부스 추천시스템을 사용한 참관객을 대상으로 설문조사를 실시하였고 회귀분석을 통해 가설을 검증하였다. 그 결과, 참관객의 만족에 영향을 미치는 요인은 부스 추천시스템의 효과성, 편의성, 추천품질, 의외성으로 나타났다. 또한, 부스 추천시스템에 대한 참관객의 만족은 재사용 의도 형성에 긍정적인 영향을 미치는 것으로 밝혀졌다. 본 연구가 가지는 의의는 다음과 같다. 먼저, 본 연구결과를 토대로 스마트 전시환경에서 부스 추천시스템에 대한 참관객의 지속적인 서비스 이용을 유도하기 위한 전략을 수립할 때 고려해야 할 주요한 요인을 실증연구를 통해 구체화시켰다는데 의의가 있다. 또한, 스마트 전시환경에서 부스 추천시스템이 성공적으로 도입 및 활용되기 위해서는 참관객의 수용 전후 차별화된 관리가 필요함을 본 연구결과를 통해 제시하였다.

• 지능정보연구
• /
• 제22권4호
• /
• pp.109-122
• /
• 2016

최근 빅데이터 분석은 기업과 전문가뿐만 아니라 개인이나 비전문가들도 큰 관심을 갖는 분야로 발전하였다. 그에 따라 현재 공개된 데이터 또는 직접 수집한 이터를 분석하여 마케팅, 사회적 문제 해결 등에 활용되고 있다. 국내에서도 다양한 기업들과 개인이 빅데이터 분석에 도전하고 있지만 빅데이터 공개의 제한과 수집의 어려움으로 분석 초기 단계에서부터 어려움을 겪고 있다. 본 논문에서는 빅데이터 공유를 방해하는 개인정보, 빅트래픽 등의 요소들에 대한 기존 연구와 사례들을 살펴보고 정책기반의 해결책이 아닌 시스템을 통해서 빅데이터 공유 제한 문제를 해결 할 수 있는 클라이언트-서버 모델을 이용해 빅데이터를 공개 및 사용 할 때 발생하는 문제점들을 해소하고 공유와 분석 활성화를 도울 수 있는 방안에 대해 기술한다. 클라이언트-서버 모델은 SPARK를 활용해 빠른 분석과 사용자 요청을 처리하며 Server Agent와 Client Agent로 구분해 데이터 제공자가 데이터를 공개할 때 서버 측의 프로세스와 데이터 사용자가 데이터를 사용하기 위한 클라이언트 측의 프로세스로 구분하여 설명한다. 특히, 빅데이터 공유, 분산 빅데이터 처리, 빅트래픽 문제에 초점을 맞추어 클라이언트-서버 모델의 세부 모듈을 구성하고 각 모듈의 설계 방법에 대해 제시하고자 한다. 클라이언트-서버 모델을 통해서 빅데이터 공유문제를 해결하고 자유로운 공유 환경을 구성하여 안전하게 빅데이터를 공개하고 쉽게 빅데이터를 찾는 이상적인 공유 서비스를 제공할 수 있다.

• 마케팅과학연구
• /
• 제17권2호
• /
• pp.111-131
• /
• 2007

브랜드의 중요성이 증대됨에 따라 다양한 브랜드 관련 연구가 이루어지고 있는데, 최근 들어서는 소비자-브랜드 관계가 브랜드 연구의 중심이 되어가고 있다. 본 논문은 이러한 소비자-브랜드 관계에 있어서 높은 품질과 지속적인 연대를 가능하게 하는 브랜드 관계 품질의 측정을 다루고 있다. 소비자-브랜드 관계에 대한 대부분의 기존 연구들은 Fournier(1994, 1998)가 제시한 6개 구성요소 또는 하위 차원을 바탕으로 하고 있다. 그러나 많은 연구들에서 소비자-브랜드 관계를 구성하는 6가지의 요소 또는 하위차원들이 소비자-브랜드 관계 품질이라는 하나의 단일차원을 이루고 있는지 확인하지 못한 채 소비자-브랜드 관계를 측정하기 위해 이들 하위차원들을 결합하여 점수를 계산하고서 연구를 진행하고 있다. 이러한 문제와 관련하여 본 연구에서는 소비자-브랜드 관계 품질을 구성하고 있는 상호의존, 몰입, 사랑/정열, 자아연관, 친밀감, 브랜드 파트너 품질 등의 6개의 차원들이 단일차원의 개념인가를 검토하였고, 이를 실증적으로 검토하였다. 구체적으로 본 연구에서는 구성개념들의 하위차원들이 단일차원의 구성개념인가를 검토한 선행연구들(Naver & Slater, 1990; Cronin & Taylor, 1992; Chang & Chen, 1998)에서 사용한 방법론을 활용하여 소비자-브랜드 관계를 구성하는 하위차원들이 단일차원을 이루고 있는가를 살펴보았다. 이러한 실증연구를 통해 소비자-브랜드 관계를 구성하고 있는 6개 차원들의 신뢰성, 수렴타당성, 판별타당성을 확인할 수 있었고, 소비자-브랜드관계를 구성하는 6개의 하위차원들이 단일차원을 이루고 있다는 것을 확인할 수 있었다. 본 연구의 연구결과는 소비자-브랜드 관계를 구성하는 6개의 하위차원을 결합하여 소비자-브랜드 관계를 연구하였던 기존 연구들, 소비자-브랜드관계를 구성하는 하위차원을 통합하여 소비자-브랜드 관계를 종합적으로 살펴보려는 여러 연구들에 있어서 방법론상의 실증적 근거를 제시하고 있다.

• 동남아시아연구
• /
• 제27권2호
• /
• pp.37-76
• /
• 2017

베트남이 메콩 델타로 영토를 팽창하는 역사 속에서 완거정은 두 개의 얼굴을 갖는다. 하나는 현재 베트남 영토 내에 있는 메콩 델타 거의 전부를 획득하는 데서 그의 공헌이다. 또 하나는 베트남 역사를 읽는 독자들의 눈을 현재의 베트남 영역에만 머물게 하는 그의 역할이다. 독자들에게 완거정의 메콩 델타 획득은 베트남 남진사의 마지막 단계로 인식된다. 그러나 완거정의 업적은 부분적이었을 뿐이다. 이 연구는 메콩 델타에서의 영토 팽창 추이에서 완거정 보다 무왕에 주목한다. 무왕의 목표는 완거정의 공헌에 의해 성취된 영토 획득보다 더 야심적이었다. 그리고 이 야심은 새로운 세계, 새로운 국제 질서를 건설한다는 그의 꿈에 의해 추동된 것이며, 그가 건설한 수도 푸쑤언은 이 새 국제 질서의 중심지였다. 여기서 그는 황제가 되기를 희망했다. 주장을 입증하기 위해서 필자는 세 가지의 요소를 검토하고 있다. 첫째는 무왕 왕권의 성격이다. 두 번째는 메콩 델타에서의 군사 작전을 위한 준비 과정이다. 셋째는 새로이 무왕의 판도로 편입된 땅의 성격에 대한 것이다. 북부 홍하 델타에 근거한 레 황실의 신하를 자처하던 선대 지배자들의 태도와 결별하면서 무왕은 즉위한 지 6년 뒤인 1744년 자신이 왕임을 선포했다. 행정 조직이 개편되었고 의복과 풍속도 북부의 것을 버리고 남국의 것을 제정하였다. 무왕은 캄보디아, 참파, 수사, 화사, 만상, 남장 등 조공국도 충분히 확보했다. 레 왕조와 비교해 이 조공국의 숫자는 더 많았으며 19세기 대남 제국의 조공국 수와 맞먹었다. 필자는 이 시점에서 무왕이 실제로 원했던 자리는 왕이 아니라 황제였음을 지적한다. 비록 무왕의 시도는 실패했지만 그는 자신을 천왕이라고 칭함으로써 통상적인 왕은 아님을 분명히 했다. 캄보디아 왕이 캄보디아 영토 내의 참족을 공격한 게 무왕에게는 캄보디아에 개입하는 충분한 이유로 작용했다. 무왕은 이 참족이 자신의 신복이라 여겼다. 왕은 그들이 자신의 판도 내에 있는 참 즉 순성진 참인의 일부라고 간주했기 때문이다. 무왕은 1750년에 캄보디아에 전쟁을 선포했다. 동시에 그는 태국왕에게 외교 서한을 보냈는데 여기서 그는 캄보디아가 자신의 배타적 조공국임을 천명했다. 캄보디아의 영토였던 메콩 델타에의 공격을 개시하기 전에 무왕은 푸쑤언을 새로 건설해 제국의 위상에 걸맞는 권력중심지로 삼았다. 인플레이션, 기근, 경제 왜곡 등도 이 시기를 특징짓는 면모였다. 그러나 이 연구는 무왕의 메콩 델타 진출 이유라고 이야기되어 온 이런 경제적인 측면보다 제국 건설자로서 무왕이 보이던 적극적 정책에 더 관심을 가지며 이런 정책에 기초한 영토 팽창의 욕구가 메콩 델타의 광활한 땅을 차지하고자 하는 데 결정적인 이유가 되었다고 주장한다. 1754년부터 3년 동안 현재 베트남의 영토에 해당하는 메콩 델타 대부분이 무왕의 영토로 편입되었다. 여기에는 완거정의 역할이 컸다. 그러나 무왕이 차지하고자 한 영역의 범주는 여기에 더해 메콩 오른편에 해당하며 현재의 사이공보다 위쪽에 있는 껌뽕짬, 프레이비엥, 스바이리엥을 포괄했다. 많아진 조공국의 수에 걸맞게 제국의 영토는 넉넉히 확대되어야 했다. 무왕의 전략은 '잠식지계'와 '이만공만'의 변주곡이었다고 이 글은 주장한다. 무왕은 하부캄보디아에 해당하는 델타를 야금야금 차지했다. 이는 누에가 뽕잎을 먹는 것과 같다는 게 일반적인 이해 방식이다. 그러나 무왕의 최종적 목표는 위에서 언급한 메콩 델타 세 개의 주까지 다 먹어치우는 것이었다. '다 먹어치운다'는 건 '잠식'의 또 다른 의미이자 적용이었다. 무왕은 현 롱안 지역으로부터 쩌우독에 이르기까지의 땅을 차지하는 과정에서 참인을 이용해 캄보디아를 쳤다. 이것은 '이만공만'의 표준적 적용이었다. 이에 더해 그는 막씨가 관할하던 중국인 망명자들을 이용해 하띠엔과 그 주변 지역을 캄보디아 왕으로부터 취했다. '이만공만'의 또다른 적용이라고 할 수 있다. 결론적으로, 필자는 19세기에 출현할 응우옌 왕조의 제국 질서 뿌리를 바라보는 새로운 방식을 주장한다. 제국 질서는 홍하 델타에 근거한 대월 제국 왕조들의 오랜 역사의 결과물이 아니라 푸쑤언에 앉은 무왕의 신 세계질서를 계승한 것이라는 주장이다. '이만공만'과 '잠식지계'는 무왕의 후손들에게 여전히 유용했다. 그의 손자인 쟈롱은 타이, 크메르, 라오, 중국인, 산지민, 유럽인 같은 '만'을 이용해 또다른 '만'인 '떠이썬 도적떼(西賊)'를 이겼다. 떠이썬에는 수많은 중국인 및 중국 해적이 활동하고 있었으며 참인, 산지민이 있었다. 무왕의 증손자인 민망 황제는 화려한 제국을 건설했다. 동시에 그는 캄보디아와 참 영역을 몽땅 먹어치우면서 영토 확장에도 골몰하고 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.