• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.519-524
• /
• 2003

In this paper we discuss the dynamic characteristics of the in-arm type hydropneumatic suspension unit(ISU). For this, two accurate models are introduced. The first one is the Benedict-Webb-Rubin equation which is adopted for the spring behavior of a real gas. This equation is applicable for the high pressure of the nitrogen gas which acts as a spring in ISU system. The second one describes the behavior of a damper, which is divided into four parts - jounce-loading, jounce-unloading, rebound-loading and rebound-unloading. This approach gives a good approximation of the real damper system. For the comparison purpose, the numerical results of the dynamic behavior of ISU system using a real gas and an ideal gas are given in the paper.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3003-3008
• /
• 2007

Critical nozzle has been frequently employed to measure the flow rate of various gases, but hydrogen gas, especially being at high-pressure condition, was not nearly dealt with the critical nozzle due to treatment danger. According to a few experimental data obtained recently, it was reported that the discharge coefficient of hydrogen gas through the critical nozzle exceeds unity in a specific range of Reynolds number. No detailed explanation on such an unreasonable value was made, but it was vaguely inferred as real gas effects. For the purpose of practical use of high-pressure hydrogen gas, systematic research is required to clarify the critical nozzle flow of high-pressure hydrogen gas. In the present study, a computational fluid dynamics(CFD) method has been applied to predict the critical nozzle flow of high-pressure hydrogen gas. Redlich-Kwong equation of state that take account for the forces and volume of molecules of hydrogen gas were incorporated into the axisymmetric, compressible Navier-Stokes equations. A fully implicit finite volume scheme was used to numerically solve the governing equations. The computational results were validated with some experimental data available. The results show that the coefficient of discharge coefficient is mainly influenced by the compressibility factor and the specific heat ratio, which appear more remarkable as the inlet total pressure of hydrogen gas increases.

• 한국분무공학회지
• /
• 제23권4호
• /
• pp.221-226
• /
• 2018

Despite the increasingly stringent automotive emissions regulations, the impact of vehicle emissions on air pollution remains large. In addition, since the issue of emission of more exhaust gas than the exhaust gas measured in the test room when the vehicle passing the exhaust gas regulation standard is run on the actual road, many countries studied and introduced gas regulations about Real Driving Emission using Portable Emission Measurement System. At present, Korea regulations restrict the number of NOx and PN in diesel vehicles. In the case of gasoline vehicles, there is no regulation on emission gas, but there is a problem of continuing automobile exhaust gas problems and a large amount of gasoline GDI vehicle's PN emission. So research and interest are increasing due to this problem. In this study, characteristics of exhaust gas depending on changes of ambient temperature were analyzed among various factors affecting exhaust gas measurement of gasoline vehicles. As a result, at the low temperature test, the lower the ambient temperature, the more the exhaust gas was emitted. At ordinary temperature test, no specific tendency was observed due to changes of ambient temperature.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 춘계 학술대회논문집
• /
• pp.153-158
• /
• 2000

For the analysis of compressible flow with real gas effect, characteristic form of Roe's Riemann solver was derived again using real gas equation of state and variable specific heal and it was extended to multi component reactive system. From this study, it is known that some correction should be made for the use of existing numerical algorithm. 1) Sonic speed and characteristic variable should be corrected with real gas effect. 2) Roe's average was applicable only with the assumption of constant properties. 3) Artificial damping term and characteristic variables should be corrected but their influence may not be significant.

• 한국가스학회지
• /
• 제5권2호
• /
• pp.43-51
• /
• 2001

본 연구에서는 상용프로그램(STONER) 상에 천연가스 전국 배관망 모델이 수립되었다. 이를 위해 STONER 상에 전국 배관망도가 작성되었으며, 배관망도 상에 기존 자료를 토대로 전국 각 배관의 배관 관경, 연장 길이가 입력되었다. 그리고 배관내를 흐르는 가스를 정의하기 위해 천연가스의 비중값이 입력되었다. 마지막으로 배관의 성질과 가스 온도를 결정하기 위해 실측치와의 비교 검증을 통하여 오류를 최소화하였다. 이에 먼저 주 배관성질 값이 가정되었고, 이에 대해 실측 수요 자료를 가지고 배관망 분석이 수행되었다. 그리고 분석 결과 계산된 공급압력과 실측된 공급 압력을 분산 비교하여 최종적으로 배관의 성질값을 결정하였다. 이렇게 배관의 성질 결정에 있어서 기존의 배관망 모델 수립 방법과는 다르게 실측자료와의 검증 방법을 사용하여 좀더 실제에 접근한 모델을 수립할 수 있었다.

• ETRI Journal
• /
• 제35권4호
• /
• pp.617-624
• /
• 2013

Low power consuming and highly responsive semiconductor-type microelectromechanical systems (MEMS) gas sensors are fabricated for real-time environmental monitoring applications. This subsystem is developed using a gas sensor module, a Bluetooth module, and a personal digital assistant (PDA) phone. The gas sensor module consists of a $NO_2$ or CO gas sensor and signal processing chips. The MEMS gas sensor is composed of a microheater, a sensing electrode, and sensing material. Metal oxide nanopowder is drop-coated onto a substrate using a microheater and integrated into the gas sensor module. The change in resistance of the metal oxide nanopowder from exposure to oxidizing or deoxidizing gases is utilized as the principle mechanism of this gas sensor operation. The variation detected in the gas sensor module is transferred to the PDA phone by way of the Bluetooth module.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.479-482
• /
• 2003

We propose a real time gas monitoring system for classifying various gases with different concentrations. Using thermal modulation of operating temperature of two sensors, we extract patterns of gases from the voltage across the load resistance. We adopt the relative resistance as a pre-processing method and an ART2 neural network as a pattern recognition method. The proposed method has been implemented in a real time embedded system with tin oxide gas sensors, TGS 2611, 2602 and an MSP430 ultra-low power microcontroller in the test chamber.

• 한국군사과학기술학회지
• /
• 제23권3호
• /
• pp.294-301
• /
• 2020

Man-In-Simulant Test(MIST) provides a test method to evaluate chemical protective equipments such as protective garments, gloves, footwear and gas mask. The MIST chamber is built to control concentration of chemical vapor that has a activity space for two persons. Non-toxic methyl-salicylate(MeS) is used to simulate chemical agent vapor. We carried out to measure inward leakage MeS vapors by using passive adsorbent dosimeter(PAD) which are placed on the skin at specific locations of the body while man is activity according to the standard procedure in MIST chamber. But more time is required for PADs and there is concern of contamination in PADs by recovering after experiment. Therefore detector for measuring in real time is necessary. In order to analyze in real time the contamination of the personal protective equipment inside the chemical environment, we have developed a wireless real-time gas detector. The detector consists of 8 gas-sensors and 1 control-board. The control-board includes a CPU for processing a signal, a power supply unit for biasing the sensor and Bluetooth-chipset for transmission of signals to external PC. All signals from gas-sensors are converted into digital signals simultaneously in the control-board. These digital signals are stored in external PC via Bluetooth wireless communication. The experiment is performed by using protective equipment worn on manikin. The detector is mounted inside protective equipment which is capable of providing a real-time monitoring inward leakage MeS vapor. Developed detector is demonstrated the feasibility as real-time detector for MIST.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권2호
• /
• pp.216-223
• /
• 2011

열압축기는 고압 증기를 이용하여 저압 증기를 중간압으로 이송하는 일종의 이젝터이다. 이젝터에 대한 기존의 수치해석 연구는 대부분 작동유체를 이상기체로 취급하고 있으나 상변화가 발생하는 경우 이상기체 거동에서 크게 벗어날 수 있다. 따라서 본 연구에서는 이상기체 상태방정식 대신 Redlich-Kwong 방정식을 적용하여 열압축기 내부 유동을 수치 해석하였고, realizable k-${\epsilon}$ 모델과 SST k-${\omega}$ 모델을 비교한 결과 SST k-${\omega}$ 모델이 shock diamond 패턴과 박리 및 난류경계층을 잘 예측하는 것을 확인할 수 있었다. 또한 실제기체 상태방정식을 사용한 경우가 이상기체 상태방정식을 사용한 경우에 비해 상대적으로 디퓨저 입구 부분과 디퓨저 목부분에서 에너지 손실이 많은 것을 알 수 있었으며, 디퓨저 출구부분에서 shock train에 의한 압력상승은 상대적으로 적으나 pseudo shock에 의한 압력상승은동일한 것으로 확인되었다.

• 한국가스학회지
• /
• 제4권3호
• /
• pp.59-64
• /
• 2000

배관에 가해지는 충격을 실시간으로 모니터링하고, 충격위치를 산출 할 수 있는 모니터링 시스템을 무선데이타 통신을 이용하여 개발하였고, 마산만 해저배관에 현장적용 후 충격실험을 통하여 유용성을 검증하였다. 실험에 사용된 배관은 총 길이 1365m, 운용압력 8.6kgf/cm^2$$, 직경 12inch인 실제 운용중인 해저가스배관을 사용하였다. 충격실험에서 충격위치 계산오차는 배관내에서 충격음파 속도의 $1\%$정도의 거리였다.