• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.1
• /
• pp.38-46
• /
• 2011

The OPRoS (Open Platform for Robotic Service) framework provides uniform operating environment for service robots. As an OPRoS-based service robot has to support real-time as well as non-real-time applications, application of Windows NT kernel based operating system can be restrictive. On the other hand, various benefits such as rich library and device support and abundant developer pool can be enjoyed when service robots are built on Windows NT. The paper presents a user-mode component scheduler of OPRoS, which can provide near real-time scheduling service on Windows NT based on the restricted real-time features of Windows NT kernel. The component scheduler thread with the highest real-time priority in Windows NT system acquires CPU control. And then the component scheduler suspends and resumes each periodic component executors based on its priority and precedence dependency so that the component executors are scheduled in the preemptive manner. We show experiment analysis on the performance limitations of the proposed scheduling technique. The analysis and experimental results show that the proposed scheduler guarantees highly reliable timing down to the resolution of 10ms.

• Smart Structures and Systems
• /
• v.14 no.6
• /
• pp.1151-1172
• /
• 2014

This paper presents a user programmable computational/control platform developed to conduct real-time hybrid simulation (RTHS). The architecture of this platform is based on the integration of a real-time controller and a field programmable gate array (FPGA).This not only enables the user to apply user-defined control laws to control the experimental substructures, but also provides ample computational resources to run the integration algorithm and analytical substructure state determination in real-time. In this platform the need for SCRAMNet as the communication device between real-time and servo-control workstations has been eliminated which was a critical component in several former RTHS platforms. The accuracy of the servo-hydraulic actuator displacement control, where the control tasks get executed on the FPGA was verified using single-degree-of-freedom (SDOF) and 2 degrees-of-freedom (2DOF) experimental substructures. Finally, the functionality of the proposed system as a robust and reliable RTHS platform for performance evaluation of structural systems was validated by conducting real-time hybrid simulation of a three story nonlinear structure with SDOF and 2DOF experimental substructures. Also, tracking indicators were employed to assess the accuracy of the results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1915-1919
• /
• 1991

The efficiency of automated assembly line is increased by realizing the automation of each assembly cell, monitoring the line information and developing the real-time line control system it. which production flow is controllable. In this paper, the several modules which are important factors when constructing automated real-time control system, such as, line control S/W module, real-time model change module, error handling module and line production management S/W module, are developed. For developing these important programming modules, real-time control and multi-tasking techniques are integrated. In this paper, operating method of real-time line control in PCB automated assembly line is proposed and for effective control of production line by using multi-tasking technique, proper operating method for relating real-time line control with multi-tasking is proposed by defining the levels of signals and tasks. CIM-Oriented modular programming method considering expandability and flexibility will be added for further research in the future.

• Korean Journal of Microbiology
• /
• v.49 no.3
• /
• pp.292-296
• /
• 2013

This study utilized an analysis method for detecting six microorganisms, such as Actinobacillus actinomycetemcomitans, Campylobacter rectus, Porphyromonas gingivalis, Tannerella forsythus, Treponema denticola, and Prevotella intermedia, triggering periodontal disease, using multiplex real-time polymerase chain reaction (PCR). The analysis including internal control was made by dividing the six species into two groups using four fluorescence dyes, and it was verified that there was no interference or cross-reaction between the target species and different kinds of oral microbial species. Qualitative and quantitative analyses were conducted on each microorganism in various samples, such as saliva and the plaque, using the multiplex real-time PCR and comparative analysis between periodontitis patients and healthy people, revealing obvious differences between them.

• Journal of Korea Multimedia Society
• /
• v.23 no.3
• /
• pp.483-489
• /
• 2020

Advancements in mobile phone hardware and network connectivity made communication becoming more and more convenient. Compared to pictures or texts, people prefer to share videos to convey information. For intentions clearer, the way to annotating comments directly on the video are quite important issues. Recently there have been many attempts to make annotations on video. These previous works have many limitations that do not support user-defined handwritten annotations or annotating on local video. In this sense, we propose an augmented reality based real-time video annotation system which allowed users to make any annotations directly on the video freely. The contribution of this work is the development of a real-time video annotation system based on recent augmented reality platforms that not only enables annotating drawing geometry shape on video in real-time but also drastically reduces the production costs. For practical use, we proposed a real-time collaboration system based on the proposed annotation method. Experimental results show that the proposed annotation method meets the requirements of real-time, accuracy and robustness of the collaboration system.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.8
• /
• pp.1453-1458
• /
• 2008

For quantitative PCR assay of Salmonella enterica serovar Typhimurium in food samples, a real-time PCR method was developed, based on DNA genome equivalent. Specific primers and probe designed based on the STM4497 gene of S. Typhimurium LT2 showed the specificity to S. Typhimurium. Threshold cycle (Ct) values of real-time PCR were obtained from a quantitative standard curve with genomic DNA of Salmonella Typhimurium. In addition, the recovery of S. Typhimurium inoculated artificially to chicken samples with $4.5{\times}10^5$ to 4.5 CFU/ml was evaluated by using real-time PCR and plate-count methods. Result showed that the number of cells calculated from the real-time PCR method had good correlation with that of the plate-count method. This real-time PCR method could be applicable to the detection and quantification of S. Typhimurium in food samples.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.7
• /
• pp.720-725
• /
• 2008

This paper proposes a system architecture for USN with a service robot to provide more active assisted living services for elderly persons by monitoring their mental and physical well-being with USN environments at home, hospital, or silver town. Sensors embedded in USN are used to detect preventive measures for chronic disease. Logged data are transferred to main controller of a service robot via wireless channel in which the analysis of data is performed. For the purpose of handling emergency situations, it needs real-time processing on gathering variety sensor data, routing algorithms for sensor nodes to a moving sink node and processing of logged data. This paper realized multi-hop sensor network to detect user movements with biometric data transmission and performed algorithms on Xenomai, a real-time embedded Linux. To leverage active sensing, a mobile robot is used of which task was implemented with a priority to process urgent data came from the sink-node. This software architecture is anticipated to integrate sensing, communication and computing with real-time manner. In order to verify the usefulness of a proposed system, the performance of data transferring and processing on a real-time OS with non real-time OS is also evaluated.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.12
• /
• pp.71-82
• /
• 2003

In this paper, we present a new method to calculate reinforcement value in QoS routing algorithm targeted for real-time applications based on Ant algorithm to efficiently and effectively reinforce ant-like mobile agents to find the best route toward destination in a network regarding necessary QoS metrics. Simulation results show that the proposed method realizes QoS routing more efficiently and more adaptively than those of the existing method thereby providing better solutions for the best route selection for real-time application that has high priority on delay jitter and bandwidth.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.1
• /
• pp.1-13
• /
• 1998

The next generation of wireless network will be problably developed as a mobile communications which will support ATM-based multiMedium traffic. We need to develop an dffective MAC protocol in order to support multimedia traffic having variety of QoS characteristics on wireless neteworks. In this paper, we propose a MAC protocol a MAC protocol where mobile terminals having cells to transmit, request slots to base station through requested slot then the base station analyze parameters from mobile and allocate slots to mobile according to priority. The multimedia slot allocation(MSA) protocol divides multimedias applications into real-time/ variant and non real-time services. Entire slots of the frameare partitioned proportionallyby sizeof bandwidth according to types of services, so that related services can use allocated-slots in priority. The proposed algorithm guarantees real time operation since real-time service share slots allocated for non real-real services. The algorithm whih divides slots of the frame is called as an Algorithm A, otherwise as an Algorithm B. The simulation compares by average delay time and cell loss probability between Algorithm and Algorithm B by increasing number of mobile terminal using the proposed MAC protocol. the simulation result for real-time services shows that average delay time and cell loss probability of Algorithm A is better than those of Algorithm B.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.12
• /
• pp.2322-2327
• /
• 2009

Uncertainty of power system operation increases due to complexity and facilities diversification in the power system. Therefore the importance of SCADA(Supervisory Control and Data Acquisition) system which obtain and manage the actual data in real-time is very important. Accordingly in the studies of power system analysis, the efforts to include real-time power system analysis in simulation and applications are made in many ways. The real-time communication characteristics of SCADA system is considered so as to develop the power system analysis program that matches actual system conditions. The observation and management of SCADA system is realized by Intouch which is mainly used for factory automation and PSS/E(Power System Simulator for Engineers) provides real time system data. SQL DB and Python language is used for real-time communication between the softwares. It is very comfortable to use the various functions in Intouch WindowMaker.