• Korean Journal of Food Science and Technology
• /
• v.12 no.2
• /
• pp.88-96
• /
• 1980

Reaction conditions in the amino-carbonyl reaction, and the effect of amino acids on the reactivity of amino-carbonyl reaction were investigated. Results obtained are as follows : 1. When the pH of the reaction mixture was increased above the isoelectric point of an amino acid, a significant increase in the color intensity was observed. 2. The color intensity increased gradually up to 1 : 1 of the molar ratio of reactants. This result was interpreted to show that sugar and free amino group combined in 1 : 1 ratio. 3. Amino-carbonyl reaction showed a significant time and temperature-dependences. The activation energy at 0.2 M glucose and 0.2 M glycine system was 37.5 Kcal/mole. 4. Among amino acids tested, glycine, lysine and $\beta$-alanine caused a significant increase in the color intensity, but acidic amino acids showed the least color intensity. The latter was interpreted to show that one of carboxyl groups of acidic amino acid has an inhibiting effect on the reactivity of the amino group. 5. The color intensity of sugars tested was in the order of xylose>arabibose>fructose>glucose>maltose>lactose.

• Laser Solutions
• /
• v.1 no.1
• /
• pp.30-38
• /
• 1998

This study includes the efface of shielding gas types on $CO_2$ laser weldability of low carbon automotive galvanized steel. The types of shielding gas evaluated are He, $CO_2$, Ar, $N_2$, 50%Ar＋50%$N_2$. The weld penetration, strength, formability(Erichsen test) of Laser weld are found to be strongly dependent upon the types of shielding gas used. Further, the maximum travel speed and flow rate to form a keyhole weld is also dependent upon types of shielding gas. The ability of shielding gas in removing plasma plume and thus increasing weld penetration is believed to be closely related with ionization/dissociation potential, which determine the period of plasma formation and disappearance. Further, thermal conductivity and reactivity of gas with molten pool also give strong effect on penetration and porosity formation which in turn affect on the formability and strength.

• Korean Journal of Materials Research
• /
• v.9 no.1
• /
• pp.51-56
• /
• 1999

The $BaTiO_3$ powders were synthesized by GNP (Glycine-Nitrate process). The powders were prepared using carbonate and alkoxide as starting materials and nitric acid was used as a solvent for starting materials as well as an oxidant for combustion. the effects of aggregates in $BaTiO_3$ powders on green densities, sintering and dielectric characteristics were investigated. When the glycine/cation molar ratio was 1.2, reactivity of self-combustion was most intensive and the degree of aggregates after calcination was low. On sintering at $1400^{\circ}C$, maximum theoretical relative density(94.99%%0 was obtained in case of 1.2 molar ratio of glycine/cation. The dielectric constant of this sintered $BaTiO_3$ was 1919.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.154-156
• /
• 2007

This paper proposes new control method of maximum power point tracking for the seaflow generation system. This control system is performed by using the duty ratio control of DC/DC converter. An advantage of MPPT(Maximum Power Point Tracking)control method presented in this paper is not necessary to use the seaflow turbine characteristic at various seaflow speed and measure the tidal speed and/or the rotation speed of the seaflow generator. Therefore the resulting system ha s the characteristics of lower cost, higher efficiency and lower complexity. The fuzzy controller is used to control the duty ratio of DC/DC converter. So the reactivity and the reliablilty of the generation system is developed. Proposed control method was analyzed mathematically and tested by computer simulation by using Matlab $Simulink^{(R)}$.

• Journal of the Korean Society of Safety
• /
• v.23 no.6
• /
• pp.1-6
• /
• 2008

Machine operator and quality are affected by chip during cutting process to product machine parts. This paper presents a study of the influence of cutting conditions on the surface roughness obtained by turning using Taguchi method for safety of turning operator. In the machining of titanium alloy, high cutting temperature and strong chemical affinity between the tool and the work material are generated because of its low thermal conductivity and chemical reactivity. Therefore titanium alloys are known as difficult-to materials. An orthogonal array, the signal-to-noise ratio, the analysis of variance are employed to investigate the cutting characteristics of implant material bars using tungsten carbide cutting tools of throwaway type. Also Experimental results by orthogonal array are compared with optimal condition to evaluate advanced reliability. Required simulations and experiments are performed, and the results are investigated.

• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.316-321
• /
• 2010

The $SO_2$ catalytic reduction was carried out under the condition of high pressure in this study. Sn-Zr based oxide and CO were used as the catalyst and reducing agent for the reduction of $SO_2$ to element sulfur, respectively. In order to compare the reactivity with the pressure on the catalytic process, the reactivity tests were performed under the conditions of atmospheric pressure and 20 atm. $SO_2$ conversion, the element sulfur yield and COS selectivity were also compared with changing the reaction temperature, $CO/SO_2$ mole ratio and the space velocity(GHSV). $SO_2$ conversion increased with increasing temperature and $CO/SO_2$ mole ratio under the condition of atmospheric pressure and element sulfur yield decreased due to the production of COS by the series reaction of CO and the produced sulfur. However, high $SO_2$ conversion and high element sulfur were obtained under the condition of 20 atm. It was concluded that COS decreased due to the condensation of the produced element sulfur under the condition of high pressure. Therefore, the high sulfur yield for $SO_2$ catalytic reduction could be profitably obtained under the condition of high pressure.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.491-496
• /
• 1998

The composition of isocyanates and polyols influence prepolymeric properties of adhesive and calking sealant based on polyurethanes (PU). One component moisture curing prepolymers, which reacted with surface humidity of substrate, were synthesized in several kinds of composition. Reactivity, structural change and properties of the prepolymers were studied as a preliminary step to manufacture PU based adhesive and sealant. To study the effects of mole ratio ([NCO]/[OH]), we used toluene diisocyanate (TDI), 4, 4'-diphenylmethane diisocyanate (MDI), and ether-polyols such as PTMG and PPG which have good resistance to hydrolysis and excellent low-temperature properties. The each prepolymers could be prepared in different molecular weight without any significant structural change. The mole ratio 1.78 of [NCO] to [OH] showed the fastest reactivity. It was confirmed that effect of polyols was larger than that of isocyanates on the prepolymer in reactivity. Several kinds of compounds were manufactured with each prepolymer, and tensile and properties were tested. And the optimum quantity of curing accelerator for the PU was 0.05~0.1%. In the tensile test, TDI based PU was superior to MDI based PU, and also PTMG based PU was superior PPG based PU.

• Applied Chemistry for Engineering
• /
• v.4 no.4
• /
• pp.807-813
• /
• 1993

Oxidative coupling of methane(OCM), one of the methods of direct methane conversion, was performed. Metal oxide catalysts used were Li/MgO and Pb/MgO. To investigate the reactivity of the catalysts with temperature, the reaction was carried out at 600, 700 and $800^{\circ}C$; and to investigate the effect of the feed ratio of the reactants($CH_4:O_2$) on reactivity, conversion, and selectivity the reaction was performed at $700^{\circ}C$ with the feed ratio of 2:1 and 1:1. The results indicate that 7wt% Li/MgO catalyst is a good catalyst for OCM reaction with 20% conversion and 65% selectivity at $700^{\circ}C$ with the feed ratio of 2:1. As feed ratio was 1:1, methane conversion was increased to 30% while $C_2$ selectivity decreased to 45% at $700^{\circ}C$ with 7wt% Li/MgO catalyst. The Pb/MgO catalyst showed less selectivity(25%) than Li/MgO did.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.585-589
• /
• 2008

Second-order rate constants (kN) have been measured for reactions of Y-substituted phenyl 2-thiophenecarboxylates (6a-h) with morpholine and piperidine in 80 mol % H2O/20 mol % DMSO at 25.0 0.1 oC. The Brnsted-type plot for the reactions of 6a-h with morpholine is linear with b lg = 1.29, indicating that the reactions proceed through a tetrahedral zwitterionic intermediate (T?). On the other hand, the Brnsted-type plot for the reactions of 6a-h with piperidine exhibits a downward curvature, implying that a change in the rate-determining step occurs on changing the substituent Y in the leaving group. Dissection of kN into microscopic rate constants (i.e., k1 and k2/k1 ratio) has revealed that k1 is smaller for the reactions of 6a-h than for those of Y-substituted phenyl 2-furoates (5a-h), while the k2/k1 ratio is almost the same for the reactions of 5a-h and 6a-h. It is also reported that modification of the nonleaving group from the furoyl (5a-h) to the thiophenecarbonyl (6a-h) does not influence pKao (defined as the pKa at the center of the Brnsted curvature) as well as the k2/k1 ratio.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.8
• /
• pp.1396-1400
• /
• 2007

In this study, poly(iso-butyl methacrylate-co-ethylene glycol dimethacrylate) [poly(iso-BMA-co-EGDMA)] microgel was prepared and used as a face powder additive. The spreading, adhesiveness, and skin reactivity of poly(iso-BMA-co-EGDMA) microgel-containing face powder II were investigated and compared with the same properties of commercially available Silica bead 700-containing face powder I. In the results, the particle size of the poly(iso-BMA-co-EGDMA) microgel was significantly swelled as a result of sebum absorption. Face powder II showed a lower primary irritation index and a higher adhesiveness than did face powder I. Face powder I showed a low sebum absorption ratio and a relatively high rate of sebum absorption, whereas face powder II, contrastingly, exhibited a high sebum absorption ratio and a low rate of sebum absorption, which properties would reduce the phenomena of facial strain and sliminess. These results indicate that poly(iso- BMA-co-EGDMA) microgel has outstanding sebum absorption characteristic and adhesiveness, and thus that it is a good candidate for use as a face powder additive.