• Textile Coloration and Finishing
• /
• v.19 no.1 s.92
• /
• pp.1-11
• /
• 2007

Dyeing of polyester/cotton blends is usually carried out through the two-bath or one-bath two-step dyeing method using proper disperse dyes and reactive dyes for each fiber. However, the dyeing requires relatively long and complicated procedure as well as there are some problems such as lower dyeability. In the present study, new one-bath one-step dyeing process was investigated using disperse dyes having amino groups and hetero-bifunctional bridge compound(DBDCBS) including dichloro-s-triazinyl groups and ${\alpha},{\beta}$-dibromopropionylamido groups to improve the dyeability of cotton component in polyester/cotton blends. And the one-bath dyeing properties of polyester/cotton blends was evaluated by various dyeing conditions such as pH, temperature and dye concentration, The optimum dyeing condition was pH 4 and $110-120^{\circ}C$. Color fastness were relatively good because of the colvalent bond formation between DBDCBS-reacted cotton fiber and disperse dye.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.2 s.150
• /
• pp.275-285
• /
• 2006

The purpose of this study was to examine the change of dyeing ability by K/S values, when dyed in different twisting processes and by one bath system and two bath system, to find possible ways of minimizing the color difference between cotton and polyester in composite yarn. The two types of composite yarn, which had one setting process(CP1) and two setting processes(CP2) were dyed with reactive/disperse dyes in both one bath dyeing system and two bath system. The dyeing ability according to the two different twisting processes was measured, and the values of the CP1 were higher compare to the values of CP2 in both one and two bath dyeing systems. This is because CP1 applied only one setting could shrink dyeing process at 130$^{circ}C$. This shrinkage increased the number of twists in the unit length and increased the yarn density, and this is the reason that the K/S values were measured higher than those of CP2. In wet shrinkage test, in opposition to CP2 only had 0.76$\%$ of the shrinkage rate, CP1 had 3.00$\%$ of the shrinkage rate. Also, the dyeing ability according to the two different dyeing methods was measured, and the values of CP1 and CP2 were both higher when dyed in two bath system. On the other hand, the color differences between cotton and polyester in composite yarns, were smaller for CP2 than that for CP1 and were also smaller in two bath dyeing system than in one bath dyeing system. Therefore, the ways of minimizing color difference between cotton and polyester in composite yarn are to apply enough setting in order to minimize shrinkage in dyeing process and to choose two bath dyeing system.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.41-46
• /
• 2001

양모의 염색에서 특히 fiber dyeing, top dyeing, yarn dyeing이 양모 염색에서 큰 비중을 차지하고 있다. 그런데 이와 같이 섬유나 실 형태로 염색되는 경우에는 후속의 여러 습식 공정 중의 염색견뢰도가 매우 중요하기 때문에 $\alpha$-bromo acrylamide를 반응기로 갖는 반응성 염료의 사용량이 급격히 증가하고 있다. (중략)

• Textile Coloration and Finishing
• /
• v.18 no.3 s.88
• /
• pp.1-9
• /
• 2006

In order to dye polyester/cotton blend fabric by one-bath dyeing process with single disperse dye, a novel hetero-bifunctional bridge compound(DBDCBS) was synthesized and utilized. The DBDCBS was designed to contain two different reactive groups such as ${\alpha},{\beta}$-dibromopropionylamido and dichloro-s-triazinyl groups. The ${\alpha},{\beta}$-dibromopropionylamido group shows considerable reactivity towards amines or amino groups at acidic condition and high temperature. In contrast, the dichloro-s-triazinyl group has reactivity towards hydroxyl groups at alkaline condition and room temperature. In order to examine whether as a bridge the compound could combine dyes containing amino groups with cellulosic substrates, disperse dyes containing amino group were tried to dye the cotton fibers pretreated with the DBDCBS compound. By the results, polyester/cotton blends were dyed by one-bath dyeing process with single disperse dye,1,4-diaminoanthraquinone.

• Textile Coloration and Finishing
• /
• v.5 no.4
• /
• pp.20-28
• /
• 1993

Primary amino group was introduced into cellulose by the Hofmann reaction from carbamoylethylated cotton fabrics. Cabamoylethylated cotton was prepared by treating the cotton fabrics with acrylamide and sodium hydroxide catalysts. These amino group altered physical and chemical properties of cotton fabrics. The influence of reactive dyeing, tensile strength and crease recovery was investigated. The exhaustion of reactive dye with cationized cotton fabrics was increase with acrylamide concentration. The pH value of maximum exhaustion was exchanged from 11.0 to 9.0 in cationized cotton fabrics.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.7
• /
• pp.1095-1103
• /
• 2008

The effects of resin finish and dyeabilities of four kinds of Iyocell fabrics that were manufactured by four kinds of pulps were investigated. The dyeabilities of Iyocell fabrics were similar, but differed from cotton fabric. In early stage of 30 minutes, cotton fabric was shown higher dye exhaustion ratio than Iyocell fabrics, however after then cotton fabric did not increase dye exhaustion, Iyocell fabrics increased continuously. At last, the dye exhaustion ratio of Iyocell fabrics were about 75% and that of cotton fabric was 65%. Two kinds of experimental procedures were applied for Iyocell fabrics. One was what the fabrics were treated with resins and washed with cellulase, and then dyed with reactive dyes. The other procedure was the fabrics were dyed with reactive dyes, and then applied the resin treatments and cellulase washing. After fibrillation and washing the undyed Iyocell fabric and the Iyocell fabric that was dyed with C.I.Reactive Red 120, their weight loss ratios were 3.5% and 2.8%, respectively. Dyeing with reactive dyes caused the crosslinking between cellulose and dyes and the crosslinking decreased fibrillation. The weight loss by enzyme washing of Iyocell fabrics decreased by the glyoxal and melamine resin treatments. The reduction of weight loss can be caused by fibrillation decrease. Dyeing and resin treating can be showed the synergic effect on the reduction of fibrillation. The effect of glyoxal resin on the reduction of fibrillation was a little better than that of melamine resin.

• Fibers and Polymers
• /
• v.7 no.4
• /
• pp.352-357
• /
• 2006

The cotton fabrics were pretreated by sodium 2-(2,3-dibromopropionylamino)-5-(4,6-dichloro-1,3,5-triazinylamino) benzenesulfonate (DBDCBS) at alkaline condition ofroom temperature and then dyed with four disperse dyes having amino groups (C.I. Disperse Yellow 9, C.I. Disperse Red 11, C.I. Disperse Blue 56 and C.I. Disperse Violet 1) at acidic condition of high temperature. A novel hetero-bifunctional bridge compound, DBDCBS, has two reactive groups such as dichloro-striazinyl group and ${\alpha},\;{\beta}$-dibromopropionylamido group. The first has reactivity towards hydroxy group of cellulosic fiber and the second shows reactivity towards amino groups of disperse dye containing amino groups. The results indicate that it is possible to dye polyester/cotton blend at one-bath dyeing using one kind of disperse dye containing amino groups. Therefore, two kinds of dyeing methods such as two-bath process one-bath dyeing and one-bath process one-bath dyeing were investigated and their dyeabilities were compared. The differences between these two methods were negligibly small so that perfect one-bath one-step dyeing of polyester/cotton blend by one kind of disperse dye was achieved.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.6
• /
• pp.819-827
• /
• 2000

The purpose of this study is to produce cotton fabric having improved dyeability and colorfastness as well as retaining the desirable durable press property. When cotton fabric was treated with additives, nitrogen content was increased as the additive concentration was increased. DP ratings and wrinkle recovery properties of BTCA treated cotton fabrics were greatly increased. But DP rating was lowered slightly by adding additives and wrinkle recovery property was decreased with the increase of additive concentration. Tensile strength was decreased by BTCA treatment but increased as additive concentration was increased. Various BTCA/additive treatments produced great affinity for reactive and acid dyes when dyebaths were adjusted at pH 3. It was showed that dyeability was increased as additive concentration was increased. The most effective additive for improving the dyeing properties of the crosslinked cotton was TEAㆍHCl. In case of reactive dye, there was almost no improvement on the dyeability of finished cotton by adding salt. Color fastness to washing and light of finished and dyed cotton were low except for the washfastness of reactive dye. Dyeing the BTCA/additive treated cotton fabrics with reactive dye had no effect on the physical properties.

• KSBB Journal
• /
• v.19 no.3
• /
• pp.200-205
• /
• 2004

For decolorization of various reactive dyes, 13 species of microbes were isolated from dyeing wastewater collected from Banweol industrial complex, Korea. Two strains among them showed good ability for removing celerity during the decolorization test with 5 different reactive dyes. And the optimal growth conditions were pH 7, 35$^{\circ}C$, yeast extract as nitrogen source, glucose as carbon source, and facultative anaerobic condition. As results, when Reactive Red 180 was used, 89 and 87% of decolorization efficiency were able to be obtained by using Bacillus anthracis and Bacillus cereus, respectively. Especially, Bacillus cereus showed good ability for decolorization of Reactive Blue 21, and the ratio was 76% Finally, it was considered that these two strains isolated in this study will be showed high decolorization ability to treat dyeing wastewater.

• Textile Coloration and Finishing
• /
• v.28 no.3
• /
• pp.175-182
• /
• 2016

To investigate dyeing behaviors in accordance with dye structure in cold pad batch dyeing of cotton knit, monochlorotriazine-vinylsulfone bifunctional dyes and monofluorotriazine-vinylsulfone bifunctional dyes were prepared. The spectral property and solubility of the dyes were tested and compared with the imported dyes. In addition, exhaustion behaviors of individual and mixed dye solutions were measured to examine the influence of dye structure on dyeing behavior in cold pad batch dyeing. The substantivity, fixation, migration index and half dyeing time were also calculated for further analysis of dyeing behavior of the prepared dyes. As a result, both dyes exhibited the superior solubilities and satisfactory light absorption properties. Also, monofluorotriazine-vinylsulfone bifunctional dyes showed moderate sensitivity to alkalinity and proper kinetic index values compared with the monochlorotriazine-vinylsulfone bifunctional dyes and the imported dyes. The results indicated monofluorotriazine-vinylsulfone bifunctional structure of the dye is suitable for cold pad batch dyeing.