• Korean Chemical Engineering Research
• /
• 제48권2호
• /
• pp.259-267
• /
• 2010

불균일 촉매 CuO를 이용한 반응성 아조계 염료 Reactive Black 5(RB5) 폐수의 촉매습식산화에서 반응온도($190{\sim}230^{\circ}C$) 및 촉매농도(0.00~0.20 g/l)가 폐수의 색도 및 총 유기탄소 TOC 제거에 미치는 영향을 조사하였다. 폐수의 색도는 분광광도계를 사용하여 측정하였고, 습식산화속도는 TOC를 이용하여 산출하였다. 열분해 조건($230^{\circ}C$, 120 min)에서 폐수의 색도는 약 90%까지 제거되었지만 TOC는 제거되지 않았다. RB5 폐수 촉매 습식산화에서의 폐수의 색도 및 TOC 제거속도는 반응온도 및 촉매농도를 증가시킴에 따라 증가하였다. 촉매의 영향은 0.01 g CuO/l에서 이미 상당히 크게 나타났으며 0.05 g CuO/l 이상에서의 촉매농도 증가에 따른 효과는 작았다. 폐수 색도의 초기변화는 색도에 대한 1차 반응속도론으로 나타낼 수 있었으며, TOC 변화는 폐수 TOC를 쉽게 산화되는 TOC와 난분해성 TOC 로 구분한 global 모델로 묘사할 수 있었다. 반응온도의 폐수 색도 및 TOC 제거속도에 미치는 영향은 Arrhenius 상관관계식으로 묘사할 수 있었다. RB5 폐수의 열분해, 습식산화 및 0.20 g CuO/l의 촉매농도를 사용한 촉매습식산화 조건에서의 색도 제거반응의 활성화에너지는 각각 108.4, 78.3 및 74.1 kJ/mol의 값을 나타내었다. RB5 폐수 촉매습식산화에서의 TOC 제거반응에서 산화 최종산물로의 전환에 대한 난분해성 중간산물로의 전환 비는 페놀 습식산화에 비하여 상대적으로 높았다.

• 공업화학
• /
• 제9권2호
• /
• pp.255-260
• /
• 1998

금속수소화물 $LaNi_5$와 $LaNi_{4.5}Al_{0.5}$을 화학적 합성법으로 제조하여, 합성된 금속수소화물의 물성을 다양한 방법으로 확인하였다. $LaNi_5$와 $LaNi_{4.5}Al_{0.5}$은 2회 정도 수소화/탈수소화 반응을 시키면 활성화되었으며, 압력-농도-온도 곡선을 측정한 결과 각각 6개와 5.5개의 수소원자가 저장되었다. $LaNi_{4.5}Al_{0.5}$의 경우 수소화 반응속도를 초기속도법으로 구한 결과 비반응 수축핵모델이 잘 적용되었으며, 수소화반응의 율속단계는 $LaNi_{4.5}Al_{0.5}$의 표면에서 수소분자의 해리화학흡착임을 알 수 있었다. $LaNi_{4.5}Al_{0.5}$의 수소화반응 활성화에너지는 $9.506kcal/mol-H_2$이었으며, 반응속도식은 273~343K와 $P_o-P_{eq}=0.25{\sim}0.66atm$의 범위에서 아래와 같이 표시되었다. $\frac{dX}{dt}=4.636(P_o-P_{eq})$ exp$\frac{-9506}{RT}$).

• Physical Therapy Rehabilitation Science
• /
• 제6권4호
• /
• pp.176-181
• /
• 2017

Objective: The timed up and go (TUG) test is method used to determine the functional mobility of persons with stroke. Its reliability, validity, reaction rate, fall prediction, and psychological characteristics concerning ambulation ability have been validated. However, the relationship between TUG performance and community ambulation ability is unclear. The purpose of this study was to investigate whether the TUG performance time could indicate community ambulation levels (CAL) differentially in persons with chronic stroke. Design: Cross-sectional study. Methods: Eighty-seven stroke patients had participated in this study. Based on the self-reporting survey results on the difficulties experienced when walking outdoors, the subjects were divided into the independent community ambulation (ICA) group (n=35) and the dependent community ambulation group (n=52). Based on the area under the curve (AUC), the discrimination validity of the TUG performance time was calculated for classifying CAL. The Binomial Logistic Regression Model was utilized to produce the likelihood ratio of selected TUG cut-off values for the distinguishing of community ambulation ability. Results: The selected TUG cut-off values and the area under the curve were <14.87 seconds (AUC=0.871, 95% confidence interval=0.797-0.945), representing a mid-level accuracy. Concerning the likelihood ratio of the selected TUG cut-off value, it was found that the group with TUG performance times shorter than 14.87 seconds showed a 2.889 times higher probability of ICA than those with a TUG score of 14.87 seconds or longer (p<0.05). Conclusions: The TUG can be viewed as an assessment tool that is capable of classifying CAL.

• 공업화학
• /
• 제10권5호
• /
• pp.690-695
• /
• 1999

석탄핏치로부터 제조된 메조페이스 핏치의 실험적 연구가 용융상태에서의 유변학적 거동을 알아보고자 수행되었다. 겉보기 점도, 전단변형율, 전단응력, 퀴놀린 불용분(QI), 연화점(SP) 변화 등을 조사하여 다음과 같은 결론을 얻었다. 중합시에 메조페이스의 적당한 함량을 증가시키기 위한 조건으로는 열처리 시간이 5시간, 촉매농도는 3%, 반응온도는 $420^{\circ}C$로 나타났다. 온도상승에 따른 겉보기 점도 변화는 핏치의 열처리 조건에 따라 달라지는데 열처리 온도가 높을수록, 열처리 시간이 길어질수록, 메조페이스 함량이 증가할수록 커지며, 유동도는 작아진다. $270^{\circ}C$ 이후의 용융 메조페이스 핏치의 유변학적 거동은 $375^{\circ}C$ 이하에서는 Newtonian fluid의 성질을 띠며 그 이상에서는 Non Newtonian fluid의 거동을 보이며 Casson 모델에 잘 일치됨을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제25권7호
• /
• pp.969-976
• /
• 2004

Cassava peelings waste, which is both a waste and pollutant, was chemically modified using mercaptoacetic acid (MAA) and used to adsorb $Cu^{2+}\;and\;Cd^{2+}$ from aqueous solution over a wide range of reaction conditions at $30^{\circ}C$. Acid modification produced a larger surface area, which significantly enhanced the metal ion binding capacity of the biomass. An adsorption model based on the $Cu^{2+}/Cd^{2+}$ adsorption differences was developed to predict the competition of the two metal ions towards binding sites for a mixed metal ion system. The phytosorption process was examined in terms of Langmuir, Freundlich and Dubinin-Radushkevich models. The models indicate that the cassava waste biomass had a greater phytosorption capacity, higher affinity and greater sorption intensity for $Cu^{2+}\;than\;Cd^{2+}$. According to the evaluation using Langmuir equation, the monolayer binding capacity obtained was 127.3 mg/g $Cu^{2+}$ and 119.6 mg/g $Cd^{2+}$. The kinetic studies showed that the phytosorption rates could be described better by a pseudo-second order process and the rate coefficients was determined to be $2.04{\times}10^{-3}\;min^{-1}\;and\;1.98{\times}10^{-3}\;min^{-1}\;for\;Cu^{2+}\;and\;Cd^{2+}$ respectively. The results from these studies indicated that acid treated cassava waste biomass could be an efficient sorbent for the removal of toxic and valuable metals from industrial effluents.

• 치과방사선
• /
• 제17권1호
• /
• pp.7-20
• /
• 1987

The author studied the acute reaction of cobalt-60 irradiation to buccal mucosa in rats and difference of the effects of single versus fractionated exposure. 195 Sprague Dowley strain rats, weighing about 120gm, were used in this experiment. 3 rats served as controls and the remaining 192 rats were divided into six groups of 32 rats each. Experimental group Ⅰ, Ⅱ, Ⅲ were received a single dose of 15Gy, 16.5Gy, 18Gy and group Ⅳ, Ⅴ, Ⅵ were received two equal sized fractionated dose of 9Gy, 9.75Gy, 10.5Gy at 4 hour intervals, respectively. The experimental groups were irradiated with cobalt-60 teletherapy unit, Picker model 4M 60 (Field size, 12x5 cm, SSD, 50㎝, Dose rate, 222cGy/min, Depth, 1㎝). The animals were sacrificed at 1, 2, 3, 6, 12 hours, 1, 3, 7 days after irradiation and the changes of the irradiated buccal mucosa were observed by electron and light microscopy. The results were as follows: 1. A single exposure was more damaging than fractionated exposure, and as the radiation dose increased, the changes of cell organelles became faster, but the healing of radiation-induced damage in fractionated exposure was faster than in single exposure. 2. The radiation-induced changes of the basal cells were the most prominent in 18Gy-single exposure group, and the least in 18Gy-fractionated exposure group. 3. Electron-microscopically, there appeared nuclear changes, swelling of mitochondria and rough endoplasmic reticulum, decrease of free ribosome, presence of vesicles, widening of intercellular space, and loss of basal lamina. The early remarkable changes were partly loss of nuclear membrane and swelling of mitochondria. 4. Light-microscopically, derangement and pyknosis of basal cells, hydropic changes of spinous cells, enlargement of granular cells, indistinctness of basement membrane, and proliferation of epithelium were observed.

• 대한기계학회논문집B
• /
• 제39권1호
• /
• pp.11-19
• /
• 2015

본 논문에서는 다물질(가연성 기체 혼합물과 금속관) 수치 해석 기법을 활용하여 밀리미터 크기의 얇은 두께의 금속관 내에서의 데토네이션을 모델링하였다. 데토네이션의 해석을 위하여 수소와 에틸렌 혼합물의 실험과 이론적 값을 기반으로 최적화된 1단계 아레니우스 형태의 화학 반응식, 이상기체 상태 방정식을 활용하여 모델링하였다. 또한 금속관의 재료인 구리와 철은 Mie-Gruneisen 상태 방정식과 Johnson-Cook 강성 모델을 활용하여 큰 압력에 의한 관의 소성 변형을 모델링하였다. 다물질 수치 해석을 위한 경계면의 추적 및 경계면 값의 결정은 각각 hybrid particle level-set 기법과 ghost fluid method(GFM)을 통하여 획득하였다. 수치적 해석 결과는 실험값과의 비교를 통하여 검증 하였으며, 관두께(두꺼운 관과 얇은 관)에 따른 내부 유동장의 변화를 확인하였다. 얇은 관의 경우, 데토네이션에 의해 발생하는 높은 내부 압력에 의하여 관의 소성 변형이 일어나고, 이에 따라 발생하는 팽창파에 의해 내부 기체 혼합물의 압력 및 밀도의 감소현상을 확인하였다.

• Archives of Plastic Surgery
• /
• 제37권5호
• /
• pp.526-530
• /
• 2010

Purpose: With the recent recognition of the importance of soft-tissue fillers, fat grafting has been assumed an increasingly important role as both an adjunctive and a primary procedure in aesthetic and reconstructive surgery. The main problem in achieving long-term soft-tissue augmentation is partial absorption of the injected fat and hence the need for overcorrection and re-injection. The purpose of this study is to improve the viability of the injected fat by the use of Lipo-PGE1. Methods: Human adipose tissue, obtained by suctionassisted lipectomy, was re -injected into the subcutaneous layer in the scalp of ICR mice. Lipo-PGE1 ($0.5{\mu}g$/kg) was injected intravenously in experimental group for 7 days from the operation day and saline was injected in control group. There were 5 animals in each group. The animals were euthanized 4 weeks after the procedure. Graft weight and volume were measured and histologic evaluation was performed. Result: Histologic analysis demonstrated significantly less cyst formation and less inflammatory reaction in the group treated with Lipo-PGE1. No significant difference was found between the groups regarding graft volume or the other histologic parameters investigated. Significant differences were demonstrated in microvascular density count. Conclusion: Less cyst formation, less inflammation, more angiogenesis indicating improved quality of the injected fat can be obtained by the addition of Lipo-PGE1. Further studies of various dosages of Lipo-PGE1 and their long-term effect are required before these encouraging results could be applied clinically.

• 대한기계학회논문집B
• /
• 제37권10호
• /
• pp.901-909
• /
• 2013

화석연료의 사용량이 증가함에 따라 전 세계적으로 환경오염문제에 대한 관심이 높아지고 있다. 이에 대한 해결책으로 신재생에너지에 대한 관심이 집중되고 있는 가운데 목질계 바이오매스의 연료화가 그 해결책의 하나로 떠오르고 있다. 따라서 본 연구에서는 목질계 바이오매스의 에너지 효율에 큰 영향을 미치는 수분증발 모델을 제시하고 반탄화 온도, 나무의 수분율, 그리고 바이오매스 종류에 따른 특성을 분석하였다. 그 결과, 반탄화 온도가 상승함에 따라 나무의 온도와 수분율은 빠르게 감소하였다. 그리고 반탄화 온도가 423K 이하인 경우에는 나무 수분율의 변화가 거의 나타나지 않았다. 또한 나무의 초기 수분율이 높을수록 숯(charcoal)이 더 느리게 생성될 뿐만 아니라, 아몬드쉘(almond shell)의 경우 가장 많은 숯이 생성되는 것을 확인하였다.

• Archives of Plastic Surgery
• /
• 제33권5호
• /
• pp.592-600
• /
• 2006

Purpose: Numerous materials, both autologous and nonautologous, have been used for augmentation of sunken areas, but they have their own limitations. The purpose of this study is to determine the histologic response and volume change of the xenogenic collagen-based scaffold($Terudermis^{(R)}$) to the transfer into a subcutaneous soft tissue location in vivo rabbit model. Methods: Eighteen New Zealand white rabbits were used. Three $1.2{\times}1.2cm$ sized subcutaneous pockets were created on the dorsal surface of each ear. $1{\times}1cm$ sized collagen matrix($Terudermis^{(R)}$) and autologous dermal graft were implanted into each pocket. Full thickness of ear was harvested in 3 days, 1, 2, 4 weeks, 3, 6 months after implantation. Results: Histological analysis of implants demonstrated progressive neovascularization, fibroblast infilteration, neocollagen bundle synthesis and organization, and few foreign body reaction. The thickness of the collagen matrix in 3 days after the operation was 87.69% of the thickness of the collagen matrix in wet state. Then it decreased to 30.17% in 6 months after the operation. The rate of decrease was similar at all points at the same time compared with autologous dermal graft. Conclusion: Our experimental study suggests that $Terudermis^{(R)}$ could be a safe material as an implant for permanent augmentation in subcutaneous tissue. However the choice of graft for augmentation should be remained to the clinical situations.