• 한국식품조리과학회지
• /
• 제15권4호
• /
• pp.363-369
• /
• 1999

The study was carried out to compare the reaction rate of caramel type browning reaction of xylose(XY), glocose(GL), sucrose(SU), glucose+citric acid(GLCA), glucose+sodiumcitrats(GLSC), glucose+glycine(GLGC) heated at 60, 80, 100, 120 and 140$^{\circ}C$ for 24 hours, respectively. 1. The color intensity (absorbance at 490 nm) of the browning reaction mixtures tends to increase as the browning reaction time gets longer and the browning of reaction temperature gets higher. But the degree of the intensity of SU and GLCA changes very little. 2. The reaction rate constant (K) was increased rapidly above 120$^{\circ}C$ and appeared maximum at 140$^{\circ}C$, especially GLGC (140.25) was the highest. The activation energy (Ea) of sugars. XY had the highest value (124.36 J/mol), while SU the lowest(104.68 J/mol). Mixtures of GLGC was shown to have higher activation energy (144.94 J/mol) than the sugar alone and Q$\_$10/ values of GLGC were 1.68-2.85. 3. The residual amount of reactants such as xylose, glucose, sucrose, citric acid, sodium citrate and glycine in each browning mixture were decreased upon the browning reaction temperature increasing. In the GLCA, GLSC and GLGC browning mixtures, respectively, the residual amounts of glucose were less than those with amino acid, organic acid and their salt.

• 한국식품과학회지
• /
• 제27권1호
• /
• pp.41-46
• /
• 1995

Changes of fatty acid composition and reaction rate were investigated according to reaction condition during partial hydrogenation reaction of soybean oil until its iodine value decreased from 134 to 110. The reaction conditions were varied in the range of from $170^{\circ}C$ to $210^{\circ}C$ of temperature, from 1.3 atm to 4.2 atm of pressure and from 0.005% to 0.1% of nickel concentration as catalyst. Lecithin was added in soybean oil to investigate the change of reaction rate. The result of addition of lecithin showed that reaction rate decreased to from 2 to 6 times in comparison with non-additive system.

• Journal of Electrochemical Science and Technology
• /
• 제8권4호
• /
• pp.344-355
• /
• 2017

In this study, a numerical approach is adopted to investigate the effectiveness factors for distributed electrochemical reactions in thin active reaction layers of solid oxide fuel cells (SOFCs), taking into account the Butler-Volmer reaction kinetics. The mathematical equations for the electrochemical reaction and charge conduction process were formulated by assuming that the active reaction layer has a small thickness, homogeneous microstructure, and high effective electronic conductivity. The effectiveness factor is defined as the ratio of the actual reaction rate (or equivalently, current generation rate) in the active reaction layer to the nominal reaction rate. From extensive numerical calculations, the effectiveness factors were obtained for various charge transfer coefficients of 0.3-0.8. These effectiveness data were then fitted to simple correlation equations, and the resulting correlation coefficients are presented along with estimated magnitude of error.

• 방사성폐기물학회지
• /
• 제19권2호
• /
• pp.271-278
• /
• 2021

In this study, a chlorination technique for recycling Li₂ZrO₃, a reaction product of ZrO₂-assisted rinsing process, was investigated to minimize the generation of secondary radioactive pyroprocessing waste. It was found that the reaction temperature was a key parameter that determined the reaction rate and maximum conversion ratio. In the temperature range of 400-600℃, an increase in the reaction temperature resulted in a profound increase in the reaction rate. Hence, according to the experimental results, a reaction temperature of at least 450℃ was proposed to ensure a Li₂ZrO₃ conversion ratio that exceeded 80% within 8 h of the reaction time. The activation energy was found to be 102 ± 2 kJ·mol^-1·K^-1 between 450 and 500℃. The formation of LiCl and ZrO₂ as reaction products was confirmed by X-ray diffraction analysis. The experimental results obtained at various total flow rates revealed that the overall reaction rate depends on the Cl₂ mass transfer rate in the experimental condition. The results of this study prove that the chlorination technique provides a solution to minimize the amount of radioactive waste generated during the ZrO₂-assisted rinsing process.

• 공학논문집
• /
• 제3권1호
• /
• pp.223-233
• /
• 1998

고상반응식을 이용한 석회와 석영과의 수열반응속도 및 반응메카니즘에 관하여 연구하였다. 출발물질로 석영과 수산화칼슘 CaO/$SiO_2$몰비 0.8-1.0로 혼합하고 $180-200^{\circ}C$, 0.5-8시간동안 포화증기압하에서 오토클레이브로 수열반응을 행하였다. 수열반응속도는 총 석회의 양과 총 석영의 양에 대한 미반응 석회의 양과 미반응 석영의 양의 비로 구하였다. 반응속도는 Jander의 식 $[1-(1-\alpha)^{1/3}]^N=Kt$를 이용하여 얻은 결과, 석회의 반응속도는 N=1로서 주로 용해속도에 의해 지배되고 석영의 반응속도는 $N\risingdotseq2$로서 확산에 의해 주로 지배된다. 규산칼슘수화물계의 수열반응속도는 반응물 입자주위에 형성된 생성물층을 통한 물질전달에 의해 율속되는 것으로 추정되고 전체 수열반응의 속도식은 대략 $N=1-2$로서 경계층으로부터 확산에 의해 율속과정으로 전환된다.

• 한국세라믹학회지
• /
• 제35권12호
• /
• pp.1336-1336
• /
• 1998

2단계 열탄소환원법으로 탄화규소 휘스커를 Ar과 H2분위기에서 기상-고상, 2단계, 기상-액상-고상 성장기구를 통해 각각 합성하였다. Ar분위기에서 탄화규소 휘스커는 다음과 같은 반응기구로 성장하였다. SiO2(S)+C(s)-SiO(v)+CO(v) SiO(v)3CO(v)=SiC(s)whisker+2CO2(v) 2C(s)+2CO2(v)=4CO(v) 이때 전체 반응속도는 세번째 반응에 참여하는 탄소에 의해 지배되었다. 따라서 이 반응이 휘스커 합성의 율속반응으로 판단되었다. 한편 H2 분위기에서 탄화규소 휘스커는 다음과 같은 반응기구로 성장하였다.SiO2(s)+C(s)=SiO(v)+CO(v) 2C(s)+4H2(v)=2CH4(v) SiO(v)+2CH4(v)=SiC(s)whisker+CO(v)+4H2(v) 이때 전체 반응속도는 SiO(v) 기체의발생 속도에 의해 지배되었다. 따라서 첫번째 반응이 휘스커 합성의 율속 반응인 것으로 판단되었다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 창립총회 및 춘계학술발표회
• /
• pp.52-55
• /
• 2000

The effects of environmental conditions, initial dissolved oxygen concentrations, pH, and the presence of electron carrier vitamin B$_{12}$ , on the reduction rate of TNT by Fe$^{0}$ was Quantitatively analyzed using a batch reactor. In all experiments, TNT reduction was best described with a first order reaction and the reduction rate decreased with the increase in the initial DO concentration. However, the specific reaction rate did not decrease linearly with the increase in the initial DO concentration. In the presence of HEPES buffer 0.2 and 2.0 mM(pH 5.7$\pm$0.2), the specific reaction rate increased more than 5.8 times, which showed reduction rate is rather significantly influenced by the pH of the solution. To test the possibility of reaction rate enhancement, well-known electron carrier(or mediator), vitamin B$_{12}$ has augmented besides Fe$^{0}$ . In the presence of 8.0 $\mu\textrm{g}$/L of vitamin B$_{12}$ , the specific reaction rate increased as much as 14.6 times. The results indicate that the addition of trace amount of vitamin B$_{12}$ can be a promising rate controlling option for the removal of organics using a Fe$^{0}$ filled permeable reactive barrier.

• 한국연소학회지
• /
• 제4권1호
• /
• pp.131-139
• /
• 1999

A Numerical Analysis of NOx production in Hydrogen-Air flame is performed using the quasi-laminar reaction modelling. As results, in low global strain rate region, $U_F/D_F\;{\leq}\;50,000$, the quasi-laminar reaction modelling reproduces the experimentally observed EINOx half power scaling that the ratio of EINOx and flame residence time, $L_f^3(D_F^2U_F)$, is proportional to the square root of global strain rate. Thus, it suggests that turbulence-chemistry interaction has a minor impact on the trend of NOx production in low global strain rate region. However, the quasi-laminar reaction modelling predicts the higher temperature and NOx than experimentally observed. This overprediction may be due to the lack of radiation and quasi-laminar reaction modelling.

• Journal of Plant Biology
• /
• 제19권4호
• /
• pp.95-99
• /
• 1976

This work deals with different extraction media and reaction mixtures on photosystem II activity of Spinach chloroplasts. The photoreduction rate of ferricyanide and DPIP by intact chloroplasts which extracted with four kinds of extraction media; S-Tris-N pH 7.2, 8.0, S-Tricine-N pH 7.2, 8.0, was measured in five kinds of reaction mixtures; S-Tris-N pH 7.2, 8.0, S-Tricine-N pH 7.2, 8.0, 0.05 M-Tris pH 7.2. The extraction medium which shows the highest photoreduction rate was S-Tris-N at pH 7.2 and S-Tricine-N at pH 8.0. As to the reaciton mixture, S-Tricine-N pH 8.0 showed the highest rate. On the complex effects of extraction media and reaction mixtures, the highest photordeuction rate of Hill oxidant by intact chloroplasts was obtained by S-Tris-N pH 7.2 extraction medium and S-Tricine-N pH 8.0 reaction mixture. The second highest activity was obtained by S-Tricine-N pH 8.0 extraction medium and reaction mixture.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제2권1호
• /
• pp.85-90
• /
• 1998

The reaction rate of $CO_2$ with 2-amino-2-methyl-1-propanol (AMP), MEA monoethanolamine(MEA) and diethanolamine (DEA) in aqueous solutions has been determined using a stirred vessel with a plane gas-liquid interface over a wide range of concentrations of amines at different temperatures. The results show that the overall reaction rate is first order with respect to both $CO_2$ and amine. The reaction rate constant varies with temperature according to the relationship which agrees with the experimental data. The proposed interpretation is that the kinetic rate determining step is a reaction of $CO_2$ with amine to form carbamic acid which is then totally and immediately ionized.