• Macromolecular Research
• /
• 제14권2호
• /
• pp.214-219
• /
• 2006

Cast Nafion-based composite membranes containing different amounts of organic, nanorod-shaped polyrotaxane were prepared and characterized, with the aim of improving the properties of polymer electrolyte membranes for direct methanol fuel cell applications. Polyrotaxane was prepared using the inclusion-complex reaction between ${\alpha}$-cyclodextrin and poly(ethylene glycol) (PEG) of different molecular weights. The addition of polyrotaxane to Nafion changed the morphology and reduced the crystallinity. The conductivity of the composite membranes increased with increasing polyrotaxane content up to 5 wt%, but then decreased at higher polyrotaxane contents. Well-dispersed, organic polyrotaxane inside the membrane can provide a tortuous path for the transport of methanol, as the methanol permeability depends on the aspect ratio of polyrotaxane, which is controlled by the molecular weight of PEG. All of the Nafion-based, polyrotaxane composite membranes showed a higher selectivity parameter than the commercial Nafion films did.

• Nuclear Engineering and Technology
• /
• 제11권1호
• /
• pp.21-27
• /
• 1979

TRIGA Mark II 원자로심에서 반응율을 측정하여 중성자 spectrum parameter인 상대적인 증성자 온도 T$^{n}$ 과 열외중성자 지수 (equation omitted)를 얻기 위해 해석하였다. 측정은 경수 환경하에 있는 central thimble과 F2위치에서 수행되었다. 상대적인 중성자 온도는 Lu과 Mn의 방사화율로 표시되며 열외중성자 지수는 Au와 Mn의 반응율에 의go서 측정된다. 이들 검출박의 상대적인 ${\gamma}$-에너지는 multichannel analyzer에 의해서 분석되었다. 실험 결과는 이론적인 계산치와 비교 평가되었다.

• Nuclear Engineering and Technology
• /
• 제46권3호
• /
• pp.281-290
• /
• 2014

In order to properly quantify fission reactor neutronics parameter uncertainties, we have to use covariance data and sensitivity profiles consistently. In the present paper, we establish two consistent methodologies for uncertainty quantification: a self-shielded cross section-based consistent methodology and an infinitely-diluted cross section-based consistent methodology. With these methodologies and the covariance data of uranium-238 nuclear data given in JENDL-3.3, we quantify uncertainties of infinite neutron multiplication factors of light water reactor and fast reactor fuel cells. While an inconsistent methodology gives results which depend on the energy group structure of neutron flux and neutron-nuclide reaction cross section representation, both the consistent methodologies give fair results with no such dependences.

• 전자공학회논문지D
• /
• 제35D권5호
• /
• pp.54-62
• /
• 1998

In a plasma etching system, ions become an important parameter in determining the wafer topography which depends on both the physical sputtering mechanism and the chemically enhanced reaction. this paper reports the energy and angular distributions of ions across the plasma sheath using a monte carlo method. The ion distribution is mainly affected by the magnitude of the sheath voltage and by the collision in the sheath. Furthemore, the local potential distribution in a plamsa sheath has been determined by solving the poisson's equation. In th is work, ionic collisions were cosidered in terms of both charge exchange and momentum transfer. The three-dimensional distributions of ions were calculated with varying the input process conditions in the plasma reactor.

• 대한화학회지
• /
• 제16권1호
• /
• pp.50-55
• /
• 1972

The mechanical degradation of $poly(\alpha-methyl$ styrene) in several mixed solvents (chlorobenzene-n-butyl alcohol, chlorobenzene-sec-butyl alcohol, chlorobenzene-Kerosene, chlorobenzene-methylketone) was studied using the capillary flow method. The velocity constant of scission reaction (K) and the limited degree of polymerization (g) were compared at the same value of [${\eta}$], which is considered as the parameter of molecular dimension of polymers in solution. As results, (K) did not change much, even if the species and the volume fraction of poor(non-) solvents changed, while the value of (g) changed according to the species of poor (non-) solvents and the value of [${\eta}$] these results were discussed.

• Nuclear Engineering and Technology
• /
• 제52권8호
• /
• pp.1638-1649
• /
• 2020

In the case of a severe accident in a Light Water Reactor, the issue of late release of fission products, from the primary circuit surfaces is of particular concern due to the direct impact on the source term. CsI is the main iodine compound present in the primary circuit and can be deposited as particles or condensed species. Its chemistry can be affected by the presence of molybdenum, and can lead to the formation of gaseous iodine. The present work studied chemical reactions on the surfaces involving gaseous iodine release. CsI and MoO₃ were used to highlight the effects of carrier gas composition and oxygen partial pressure on the reactions. The results revealed a noticeable effect of the presence of molybdenum on the formation of gaseous iodine, mainly identified as molecular iodine. In addition, the oxygen partial pressure prevailing in the studied conditions was an influential parameter in the reaction.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.293-296
• /
• 2003

The purpose of this study is to examine the effect of aluminium sulfate on setting time and compressive strength of cement mortar as focused on formation of ettringite by the reaction between aluminium sulfate and calcium hydrate. The specific parameter was the addition ratio of aluminium sulfate to cement mortar. After specimens made by admixing aluminium of 0~7% by weight of cement, respectively, to cement mixtures, the experimental items such as setting time, compressive strength and heat of hydration in this study were carried out. As a result of this study, it is possible that aluminium sulfate could be added into cement mixture from a standpoint of increasing early compressive strength as considering the setting time and heat of hydration.

• 대한화학회지
• /
• 제28권4호
• /
• pp.265-268
• /
• 1984

9종류의 m-또는 p-치환 phenacyl bromide와 quinoline을 같은 몰 비로 메탄올 용매하에서 반응시켜 반응속도를 전기 전도도법으로 측정하였다. 이들 반응은 $S_N2$과정에서 따라 진행하며 전자 주는 기나 전자 끄는 기가 모두 반응속도를 촉진하였으며 이 사실을 설명할 수 있는 반응메카니즘을 제시하였다. 또 이 반응에 수반하는 열역학적 parameter도 구하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.100-105
• /
• 1992

A mathematical model is developed for a CSTR in which free radical solution polymerization of methyl methacrylate(MMA) takes place. It turns out that five ordinary differential equations are to be treated simultaneously in order to predict the reactor performance. Although the reaction proceeds under the conditions of relatively low temperature and pressure, the system shows very complex bifurcation features due to the diffusion limitation (gel effect) and the temperature dependence of the kinetic parameters and physical properties. The effects of various system parameters on the reactor performance as well as on the polymer properties are investigated by using the bifurcation analysis. The application of the singularity theory enables us to divide the parameter space into several different regions, in each of which the system takes a unique steady state structure. Under certain circumstances, complex dynamic features such as HB points and limit cycles are observed and these should be taken into consideration in the reactor design.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.185-188
• /
• 2001

In this study, $Al_2$O$_3$films have been deposited with Atomic Layer Deposition(ALD) for gate insulator for MPTMA and $H_2O$ at low temperature below 40$0^{\circ}C$ . Conventional methods of $Al_2$O$_3$thin film deposition have suffered from the poor step coverage due to reduction of device dimension and increasing contact/via hole aspect ratio. ALD is a self-limiting growth process with controlled surface reaction where the growth rate is only dependent on the number of growth cycle and the lattice parameter of materials. ALD growth process has many advantages including accurate thickness control, large area and large batch capability, good uniformity, and pinholes freeness.