• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.4
• /
• pp.34-43
• /
• 2012

The behaviors of the curved bridges which has been constructed in the RAMP or Interchange are very complicate and different than orthogonal bridges according to the variations of radius of curvature, skew angle and spacing of shoes. Occasionally, the camber of girder and negative reactions can be occurred due to bending and torsional moment. In this study, the effects on the negative reaction in the curved bridge were investigated on the basis of design variables such as radius of curvature, skew angle, and spacing of shoes. For this study, the twin-steel box girder curved bridge with single span which is applicable for the RAMP bridges with span length(L) of 50.0m and width of 9.0m was chosen and the structural analysis to calculate the reactions was conducted using 3-dimensional equivalent grillage system. The value of negative reaction in curved bridges depends on the plan structures of bridges, the formations of structural systems, and the boundary conditions of bearing, so, radius of curvature, skew angle, and spacing of shoes among of design variables were chosen as the parameter and the load combination according to the design standard were considered. According to the results of numerical analysis, the negative reaction in curved bridge increased with an decrease of radius of curvature, skew angle, and spacing of shoes, respectively. Also, in case of skew angle of $60^{\circ}$ the negative reaction has been always occurred without regard to ${\theta}/B$, and in case of skew angle of $75^{\circ}$ the negative reaction hasn't been occurred in ${\theta}/B$ below 0.27 with the radius of curvature of 180m and in ${\theta}/B$ below 0.32 with the radius of curvature of 250m, and in case of skew angle of $90^{\circ}$ the negative reaction hasn't been occurred in the radius of curvature over 180m and in ${\theta}/B$ below 0.38 with the radius of curvature of 130m, The results from this study indicated that occurrence of negative reaction was related to design variables such as radius of curvature, skew angle, and spacing of shoes, and the problems with the stability including negative reaction will be expected to be solved as taken into consideration of the proper combinations of design variables in design of curved bridge.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.243-243
• /
• 1994

Although active systemic anaphylaxis and passive cutaneous anaphylaxis have been empolyed to study anaphylactic hypersensitivity, it is difficult and time-consuming to induce these reactions in experimental animals. In recent, Jun et al have found a simple method to induced anaphylactic hypersensitivity such as anaphylactic shock(AS) and cutaneous reaction(CR) using compound48/80. Cortex mori (Morus alba L.), the root bark of mulberry tree has been used as an antiphlogistic, diuretic, and expectorant in herbal medicine. The purpose of this study was to determine whether the methanol extract of Cortex mori could inhibit the compound 48/80-induced AS and CR. To induce AS, various doses of compound 48/80 (5, 7.5, 10, 15$\mu\textrm{g}$/gm B.W.) were injected intraperitoneally (i.p.) into ICR mice. The animals were pretreated by three injection(i.p.) of Cortex mori before compound 48/80 administration. Peripheral blood was collected from the right ventricle to estimate the level of serum histamine at 15 minutes after the injctin(i.p.) of various concentration of compound48/80. Mortility rate, mean death time and mesenteric mast cell degranulation rate were evaluated over a 72 hour period. To estimate the effect of Cortex mori on compound 48/80-induced cutaneous reaction, various doses of compound 48/80 with or without Cortex mori were injected intradermally(i.d.) into the shaved flank of Sprague-Dawley rats, and the blue cutaneous patchs induced by Evans'blue injection at the compound 48/80 alone and Cortex mori plus compound 48/80 injection sites were observed. As a Parameter of these reactions, the levels of histamine in the supernatant, calcium uptake and intracellular CAMP of RPMC were measured. supernatant, 1)compound 48/80-induced mortility rate, mean death time, mesenteric mast cell degranulation rate, and serum histamine level in ICR mice were significantly inhibited by pretreatment of Cortex mori, 2) cutaneous reaction inducd by compound48/80 was well developed in Sprague-Dawley rat, but Cortex mori inhibited the compound 48/80-induced blue patch formation remarkably, 3) the compound 48/80-induced degranulation, histamine release and calcium uptake of RPMC pretreated with Cortex mori were significantly inhibited, compared to those of control without Cortex mori pretreatment, and 4)the level of cAMP of RPMC was reduced bythe increased concentration of compound 48/80, pretreatment of Cortex mori not only inhibited the compound 48/80-induced reduction of CAMP but also significantly increased the level of cAMP naturally, from the above results, it is suggested that Cortex mori has an some substances with an ability to inhibits the compound 48/80-induced AS,CR, and mast cell activation.

• Korean Journal of Food Science and Technology
• /
• v.35 no.3
• /
• pp.417-422
• /
• 2003

The onions are considered to be a favorable functional source of beverage because they contain much sugar and various nutrients, and they are juicy vegetable. Recently, consumers have a new trend to take functional foods with health benefits. To meet this need, this study was the basic research to establish a manufacturing process of functional onion beverage by glucose oxidase. Glucose oxidase catalyzes reaction of glucose oxidation and makes generation of gluconic acid. Kinetics of the reaction was also investigated, and maximum glucose consumption rate $(V_{max})$ of $26.1{\times}10^{-2}\;g/L{\cdot}min$ and $K_m$ of 5.84 g/L were obtained. Optimum conditions were obtained when the glucose oxidase catalyzed reaction was carried out at temperature of $25^{\circ}C$, agitation rate of 450 rpm and aeration rate of 4 vvm in a 2.5 L jar fermentor. Finally, the enzyme reactor was 10-times scaled up and a similar glucose oxidation performance was achieved in the scaled-up reactor.

• Clean Technology
• /
• v.19 no.4
• /
• pp.416-422
• /
• 2013

In environmental friendly aspects, the synthesis of glycerol carbonate from glycerol using carbon monoxide and oxygen gases which were produced in petrochemical plants was studied. The oxidative carbonylation of glycerol under batch reaction system was performed on parameter conditions such as effect of various metals (Cu, Pd, Fe, Sn, Zn, Cr), oxidizing agents, mole ratio of carbon monoxide to oxygen, catalyst amount, solvent types, reaction temperature and time and dehydrating agents. In particular copper chloride catalysts showed the excellent activities, and the glycerol carbonate yields over CuCl and $CuCl_2$ catalysts were the maximum of 44% and 64%, respectively at the following reaction conditions: solvent as nitrobenzene, mole ratio of 1:3:0.15 (glycerol:carbon monoxide:catalyst), mole ratio of 2:1 (carbon monoxide:oxygen), the total pressure of 30 bar at 413 K for 4 hr. It was found that reactivity were significantly different depending on the oxidation number of Cu catalysts, and oxygen plays an important role as oxidizing agents in producing H2O during oxidation reaction after carbonylation of glycerol.

• Journal of the Korea Concrete Institute
• /
• v.14 no.1
• /
• pp.118-125
• /
• 2002

Hydration is the main reason for the growth of the material properties. An exact parameter to control the chemical and physical process is not the time, but the degree of hydration. Therefore, it is reasonable that development of all material properties and the formation of microstructure should be formulated in terms of degree of hydration. Mathematical formulation of degree of hydration is based on combination of reaction rate functions. The effect of moisture conditions as well as temperature on the rate of reaction is considered in the degree of hydration model. This effect is subdivided into two contributions: water shortage and water distribution. The former is associated with the effect of W/C ratio on the progress of hydration. The water needed for progress of hydration do not exist and there is not enough space for the reaction products to form. The tatter is associated with the effect of free capillary water distribution in the pore system. Physically absorption layer does not contribute to progress of hydration and only free water is available for further hydration. In this study, the effects of chemical composition of cement, W/C ratio, temperature, and moisture conditions on the degree of hydration are considered. Parameters that can be used to indicate or approximate the real degree of hydration are liberated heat of hydration, amount of chemically bound water, and chemical shrinkage, etc. Thus, the degree of heat liberation and adiabatic temperature rise could be determined by prediction of degree of hydration.

• Journal of Powder Materials
• /
• v.30 no.4
• /
• pp.324-331
• /
• 2023

Lithium (Li) is a key resource driving the rapid growth of the electric vehicle industry globally, with demand and prices continually on the rise. To address the limited reserves of major lithium sources such as rock and brine, research is underway on seawater Li extraction using electrodialysis and Li-ion selective membranes. Lithium lanthanum titanate (LLTO), an oxide solid electrolyte for all-solid-state batteries, is a promising Li-ion selective membrane. An important factor in enhancing its performance is employing the powder synthesis process. In this study, the LLTO powder is prepared using two synthesis methods: sol-gel reaction (SGR) and solid-state reaction (SSR). Additionally, the powder size and uniformity are compared, which are indices related to membrane performance. X-ray diffraction and scanning electron microscopy are employed for determining characterization, with crystallite size analysis through the full width at half maximum parameter for the powders prepared using the two synthetic methods. The findings reveal that the powder SGR-synthesized powder exhibits smaller and more uniform characteristics (0.68 times smaller crystal size) than its SSR counterpart. This discovery lays the groundwork for optimizing the powder manufacturing process of LLTO membranes, making them more suitable for various applications, including manufacturing high-performance membranes or mass production of membranes.

• Nuclear Engineering and Technology
• /
• v.24 no.2
• /
• pp.163-167
• /
• 1992

Nondestructive neutron activation analysis of copper in high purity Aluminum samples which can be used as a parameter of impurity is investigated and determined. Other 23 trace impurity elements in the samples are also determined. In the analysis of copper, the new irradiation method using thermal column was applied to reduce the interfering activity of 24Na produced by 27Al(n,$\alpha$)24Na reaction induced by fast neutron. As a result, the interference can be reduced to 100 times more than other activation methods. Also the influence by activity of 24Na is found in the range of 2~3 %. It has been observed that the copper contents in so-ratted“six nine”class standard aluminum samples are about 0.54 $\pm$ 0.08 ppm. By the comparison with other values re-ported, our results are reasonable and can be available as a improved routine analysis.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.866-875
• /
• 2001

In this work, thermal decomposition mechanism based on kinetic parameters and thermal stability of carbon fiber-reinforced carbon matrix composites (C/C composites), have been studied under high temperature oxidative conditions with addition of tetra-ethylorthosilicate (TEOS) as an oxidation inhibitor. Thermogravimetric analysis (TGA) was executed to evaluate the thermal decomposition mechanism and thermal stability of C/C composites in the temperature range of 30 ～ $850^{\circ}C$. As a result, the kinetic parameters of the composites impregnated with TEOS, i.e., activation energy for thermal decomposition ($E_d$), order of reaction (n) , and pre-exponential factor (A) were evaluated as 136 kJ/mol, 0, and 2.3$\times$$10^9s^{-1}$, respectively. Especially, the IPDT and $E_d$ of C/C composites impregnated with TEOS were improved largely compared with the composites impregnated without TEOS, due to the formation of $SiO_2$ on composite surfaces, resulting in interrupting the oxygen attack to carbon active site in the composites.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.5
• /
• pp.416-422
• /
• 2016

This paper presents preliminary performance analysis of a satellite formation flying testbed, which is under development by Astrodynamics and Control Laboratory, Department of Astronomy, Yonsei University. A model reference adaptive controller (MRAC) with a first-order reference model is chosen to enhance the response of reaction wheel system which is subject to uncertainties caused by unmodelled dynamics and measurement noise. In addition, an on-line parameter estimation (OPE) technique based on the least square is combined to eliminate the effect of angular measurement noise by estimating the moment of inertia. Both numerical simulations and hardware experiments with MRAC support the effectiveness and applicability of the adaptive control scheme, which maintains the tracking error below $0.25^{\circ}$ for the entire time span. However, the high frequency control input generated in hardware experiment strongly suggests design modifications to reduce the effect of deadzone.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.750-758
• /
• 2009

This study, as basic research which was intended to develope the surface reinforcement method using reinforcement material which is applicable to very soft ground in Korea, was aimed at proposing the design parameter for the surface ground improvement method. To that end, a wide width tensile test using geotextile, geogrid and steel bar (substitute for bamboo) and 25 kinds of the laboratory model tests with the end restraint conditions of the reinforcement that comprises the constrained and partially constrained (3 types) conditions were conducted. And the result indicated that the modulus of subgrade reaction or $N_c$ value (5.3) apparently overestimated the bearing capacity of very soft ground such as dredged ground. Moreover, as a result of model test by partially constraining the preload of 23.0kgf using geotextile, the effect of bearing capacity($q_1$) appeared to be the largest till the loading stress was $0.4tf/m^2$ due to cohesion, while it reached 75% of the maximum bearing force after $0.4tf/m^2$ due to increase in the effect of bearing capacity($q_2$) caused by the tensile force of the reinforcement. Such results tended to have appeared constantly or very similarly with each other, irrespective of the type of reinforcement (geogrid, steel bar) and constraint conditions.