• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2004.11a
• /
• pp.355-360
• /
• 2004

This study is a research that evaluates and analyzes on the subjective reaction of Won buddhism small sanctum through psychoacoustics experiment. For doing it, after choosing of 5 Won buddhism small sanctums of which its building volume at $400m^{3}{\sim}650m^{3}$, a psychoacoustics experiment has been conducted. Based on those A, B, C, E temple-halls which appeared as higher than 'average' in the result of subjective reaction evaluation of the Won buddhism small sanctum through psychoacoustics experiment, it could be classified as the conclusion of the factor analysis: the first factor is 'space sense of sound', the second factor is 'intimacy-feeling with sound' and the third factor is 'clearness of sound', respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.5
• /
• pp.494-502
• /
• 1991

Diazotized chitin(CHITN) as supports of immobilized enzyme, which was obtained by alkaline hydrolysed chitin with NaN3 and HCI was employed to produce CHITN-Gase with glutaraldehyde as bifunctional reagent. Activities of CHITN-Gase were determined with reaction of p-nitro-pheol-$\beta$-D-glucopyranoside(PNG) in plug flow reactor as a reference of CHITA-Gase. Their optimum temperature, pH, Km and Vmax, mass transfer coefficient (h), effctiveness factor(η)were plotted with variation of flow rate and H/D. Mass transfer coefficient(h) of those enzymes increased because of their flux, as flow rates were increased and controlled by reaction rate. Effectiveness factor(η) of both enzymes were nearly 1.0.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.65-72
• /
• 2016

This paper presents the analysis of the analysis of thrust characteristics of linear induction motors(LIMs) according to secondary reaction plate. LIMs are well known as high speed transport systems, which can obtain thrust directly without gears and links, or auxiliary mechanisms. A simple structure, easy maintenance, and less environmental pollution are advantages of LIMs. In transport systems using LIMs, the secondary reaction plate is an important design factor, because it has considerable impact on the cost of the railway as well as the performance of the LIMs. This paper deals analyzed the characteristics of linear induction motor used for moving the vehicle of container scanner. Thrust, efficiency and load characteristic were interpreted with FEM regarding two models whose material of secondary reaction plate was copper and aluminum. It suggested the interpretation of thrust, efficiency and power factor characteristic along slip and compared the operation ability of linear induction motor through characteristics analysis along the load.

• Archives of Pharmacal Research
• /
• v.24 no.3
• /
• pp.249-255
• /
• 2001

We studied the effect of aqueous extract of Magnolia officinalis bark (Magnoliaceae) (MOAE) on the immediate hypersensitivity reaction. MOAE (0.01 to 1g/kg) dose-dependently inhibited compound 48/80 induced systemic anaphylaxis in rats. MOAE (0.1 and 1g/kg) also significantly inhibited local immunoglobulin E (lgE)-mediated passive cutaneous anaphylactic reaction. When MOAE was pretreated at concentrations ranging from 0.01 to 1g/kg, the levels of plasma histamine were reduced in a dose-dependent manner. MOAE (0.001 to 1 mg/ml) dose-dependently inhibited the histamine release from rat peritoneal mast cells (RPMC) activated by compound 48/80 or anti-dinitrophenyl (DNP) Igl. The level of cyclic AMP (CAMP) in RPMC, when MOAE was added, significantly increased compared with that of the normal control. Moreover, MOAE (0.01 to 1 mg/ml) had a significant inhibitory effect on anti-DNP Igl-induced tumor necrosis factor-$\alpha$ production from RPMC. These results indicate that MOAE inhibits immediate hypersensitivity reaction in vivo and in vitro.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2277-2284
• /
• 2013

In this study, a groundwater table fluctuation method is suggested to predict groundwater level by means of groundwater table fluctuation due to recharge and discharge under unsteady condition. This model analyzes groundwater variation characteristics by using reaction factor related with groundwater flow and specific yield related with recharge. For the test of this model, measured groundwater level at JD Yongdam 1 and JW Konghang for 5 years (2006-2010) were used. At JD Yongdam 1, the estimated specific yield was 0.023, and the estimated reaction factor was 0.039. At JW Konghang, the estimated specific yield was 0.009 and the estimated reaction factor was 0.028, respectively. This model can estimate recharge and saturated parameters, thus it is expected that this model would be the proper tool for checking the parameter of hydrologic model and percolation features.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.81-89
• /
• 2008

Shear test procedure for concrete-dowel interaction was proposed along with determination of dowel support reaction factor or shear spring stiffness constant using the spreadsheet example. For this task, three AASHTO-type standard specimens were prepared to simulate behavior of the jointed concrete pavement. A side support system was adopted to minimize twisting of the test specimen which had been observed in a preliminary test. A typical elastic behavior of the dowel-concrete interaction was observed from several test loops of loading, unloading and reloading procedures. However load versus slab displacement represents to be nonlinear. Test results show that the dowel support reaction factor ranges from 550-880 GN/m3, which is 1.4-2.2 times greater than 407GN/m3 proposed by Yoder and Witczak. This is because less torsional distraction was occurred with the help of a side support system adopted in this experiment. The dowel support reaction factor or shear spring stiffness constant obtained from the procedures proposed in this paper may be used as a reference data for the structural analysis of jointed concrete pavement.

• Safety and Health at Work
• /
• v.7 no.2
• /
• pp.124-129
• /
• 2016

Background: Work-related fatigue has a strong impact on performance and safety but so far, no agreed upon method exists to detect and quantify it. It has been suggested that work-related fatigue cannot be quantified with just one test alone, possibly because fatigue is not a uniform construct. The purpose of this study is therefore to measure work-related fatigue with multiple tests and then to determine the underlying factorial structure. Methods: Twenty-eight employees (mean: 36.11; standard deviation 13.17) participated in five common fatigue tests, namely, posturography, heart rate variability, distributed attention, simple reaction time, and subjective fatigue before and after work. To evaluate changes from morning to afternoon, t tests were conducted. For further data analysis, the differences between afternoon and morning scores for each outcome measure and participant (${\Delta}$ scores) were submitted to factor analysis with varimax rotation and each factor with the highest-loading outcome measure was selected. The ${\Delta}$ scores from tests with single and multiple outcome measures were submitted for a further factor analysis with varimax rotation. Results: The statistical analysis of the multiple tests determine a factorial structure with three factors: The first factor is best represented by center of pressure (COP) path length, COP confidence area, and simple reaction time. The second factor is associated with root mean square of successive difference and useful field of view (UFOV). The third factor is represented by the single ${\Delta}$ score of subjective fatigue. Conclusion: Work-related fatigue is a multidimensional phenomenon that should be assessed by multiple tests. Based on data structure and practicability, we recommend carrying out further studies to assess work-related fatigue with manual reaction time and UFOV Subtest 2.

• Journal of Nutrition and Health
• /
• v.9 no.4
• /
• pp.54-58
• /
• 1976

Deterioration of ascorbic acid content is the important factor in the food quality. The degradation of ascorbic acid undergoes as a first-order of reaction in the presence of excess oxygen content. However, under the limited oxygen content, ascorbic acid decomposes as a psudo-first order of reaction. The ascorbic acid, in this study, under the limited dissolved oxygen content in the presesce of iron(III) and copper(II) decomposed as first-order reaction with a little influence in rate constant and the light was an accelerating factor on the ascorbic acid degradation.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.11a
• /
• pp.49-56
• /
• 1999

A material was formulated with Phenol novolac and HEXA only. The cure kinetics and thermal characteristics of phenol novolac with various HEXA contents were peformed by differential scanning calorimetry and thermal gravimetric analysis. All kinetic parameters of the curing reaction including the reaction order, activation energy, and rate constant were calculated and reported. The results indicate that the curing reaction goes through an autocatalytic kinetic mechanism. The friction and wear characteristics of this material were determined using friction material testing machine. The friction coefficient of phenol novolac with various HEXA contents was determined using the PV(pressure & velocity) factor. The most stable and highest friction coefficient with a various pressure and velocity condition was found at HEXA 10 wt.% material. The specific wear rate per unit sliding distance with a various HEXA contents was reported.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.6
• /
• pp.448-453
• /
• 1986

Two contributions to the activation barrier of the $S_N2$ reaction, intrinsic and thermodynamic, are discussed in connection with the predictive power of various rate-equilibrium relationships. It has been shown that the PES models can only give correct predictions of changes in structure and energy of the transition state if the activation barrier is dictated by the thermodynamic factor. We concluded that the identity and dissociative $S_N2$ reactions are dominated by the intrinsic component while associative $S_N2$ reactions are predominantly of thermodynamic controlled. Thus in the former cases, the PES models fail, whereas in the latter cases predictions based on the intrinsic factor, the quantum mechanical models, fail. Finally in a general case of equal contributions by thermodynamic and intrinsic factors, the $SN_2$ reaction proceeds by a synchronous process with zero net charge on the reaction center, for which predictions of substituent effects will be the same as for the intrinsic control case.