• Journal of Environmental Health Sciences
• /
• v.14 no.1
• /
• pp.11-22
• /
• 1988

Calcium oxide, lithium oxide and titanium oxide were investigated as additives of zinc oxide for the removal of hydrogen sulfide at high temperature. This experiment was performed in the range of 1.0-2.0 vol.% H$_2$S concentration at 623-873 K reaction temperature, using a thermogravimetric analyzer. A pore blocking model was found to fit the reaction rate and the kinetics data were sucessfully expressed by this model. The reactions between additive sorbents and hydrogen sulfide were first order with respect to hydrogen sulfide concentration in a gaseous mixture with nitrogen. Among the used sorbents, ZnO-CaO 0.5 at.% and ZnO-TiO$_2$ 2.0 at.% sorbents had the best additive effects on the sulfidation reaction between additive sorbents and hydrogen sulfide, whereas the ZnO-Li$_2$O sorbents were ineffective.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.211-219
• /
• 1998

Propellants pressurized and fed into the combustion chamber undergoes the mechanical, chemical combustion processes. Along with their distinctive physical characteristics, propellant combustion is typically divided into the processes; injection, atomization, mixing, vaporization and chemical reaction. These processes assumed to happen in a serial manner are strongly coupled, thereby involves formidable physical complexities. In this study a numerical experiment is attempted to simulate the burning sprays due to OFO, FOF triplet / FOOF split doublet injectors. Based on Eulerian-Lagrangian frame, Navier-Stokes equation system for compressible flows is preconditioned with low Reynolds number $k-{\varepsilon}$ turbulent model and time-integrated by LU-SGS, and the sprays are described by DSF model with the characteristics initialized by experimentally determined spray characteristics. Simplified single global reaction model approximates heptane-air reaction. It was observed that FOOF split doublet injector shows better atmization with shortest residence and the FOF triplet injector produces better combustion performance.

• Journal of Korean Society for Quality Management
• /
• v.30 no.1
• /
• pp.97-117
• /
• 2002

We apply Taguchi method to the process optimization problem of chemical reaction process, and some case studies are done to find out the way for cost reduction and quality improvement The parameter and tolerance designs of Taguchi mettled are done with operation data of a chemical process and we propose a procedure how to use and analyze the operation data to find the optimal process conditions and tolerance limits. In order to use the continuous values in experiment conditions, it is suggested how to determine the interval of each level by discrete values and to treat any missing values caused from discrete 4 levels.

• Journal of the Korean Society of Radiology
• /
• v.2 no.1
• /
• pp.31-34
• /
• 2008

The neutron capture spectrum for the light nuclide was very useful to study the nuclear structure. In the present study, the capture gamma-ray from the 27-keV resonance of $^{19}F(n,g)^{20}F$ reaction were measured with an anti-Compton NaI(Tl) spectrometer and the 3-MV Pelletron accelerator of the Research Laboratory for Nuclear Reactors at the Tokyo institute of technology. A neutron Time-of-Flight method was adopted with a 1.5 ns pulsed neutron source by the $^7Li(p,n)^7Be$ reaction. In the present experiment, a Teflon(($CF_2$)n) sample was used The sample was disk with a diameter of 90mm. The thickness of sample was determined so that reasonable counting rates could be obtained and the correction was not so large for the self-shielding and multiple scattering of neutrons in the sample, and was 5mm. The primary gamma-ray transitions were compared with previous measurement of Kenny.

• Journal of the Korean Society of Safety
• /
• v.6 no.4
• /
• pp.26-33
• /
• 1991

To remove SO$_2$ from flus gas, cupric oxide, manganese oxide and iron oxide were studied with varying loading value. The experiment was carried out in a flow reactor and the reactants were prepared by impregnation method using alumina. The reaction temperature was varied from 30$0^{\circ}C$ to 45$0^{\circ}C$. Experimental results showed that all of these metal oxides were effective on SO$_2$ removal reaction and cupric oxide was the best reactant. The sample with 10wt％ loading value was better reactant than with 20wt％ because in case of 20wt％ loading, metal dispersion on the alumina surface was not uniform. And the SO$_2$ removal efficiency was increased with the reaction temperature.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.05a
• /
• pp.128-137
• /
• 1998

In this numerical experiment, the preconditioned compressible Navier-Stokes equation is tested to analyze the laminar spray combustion. Sprayed flow field is formulated by Eulerian-Lagrangian system for the gas and liquid phases each. DSF(Deterministic Separated Flow) model was adopted for the sprays with the vortex model to describe transients of individual droplet heating. Simplified single global reaction model approximates methanol-air reaction with and without disk flame holder. The equation system is discretized by finite difference technique and time integrated by LU-SGS. Due to greatly simplified chemical reaction mechanism and the lack of experimental evidences, most of the efforts were devoted to show the applicability and robustness of preconditioned compressible flow calculation algorithm. Computation results in qualitatively reasonable combusting flow field, hence it is believed that further refinement are required to produce quantitatively accurate solutions.

• Natural Product Sciences
• /
• v.14 no.1
• /
• pp.47-50
• /
• 2008

To evaluate the antiallergic effect of the dried root of Astragalus membranaceus Bunge (AM) (Leguminosae), which inhibited the mouse passive cutaneous anaphylaxis (PCA) reaction in a preliminary experiment, its main constituents, astragalosides I and IV, were isolated and their antiallergic effects were investigated. Astragalosides I and IV inhibited the PCA reaction induced by the IgE-antigen complex, and the scratching behaviors induced by compound 48/80. These constituents reduced the protein expressions of $TNF-{\alpha}$ and IL-4 in IgE-induced RBL-2H3 cells. These findings suggest that astragalosides I and IV as well as AM can improve IgE-induced anaphylaxis and scratching behaviors.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.4
• /
• pp.352-358
• /
• 2004

The firing reaction and calcination characteristics of the waste shellfish were examined for the future use as absorbent. The weight variation was measured according to thermal-decomposition using TGA and observed variation of the phase. The qualitative and quantitative analysis of the sample were performed using XRD and the structural analysis, SEM. The results of TGA and XRD experiments showed that the almost all of the raw Corbicula Japonica and Ostrea virginjca were changed from calcite to lime by firing and calcination reaction. The result of SEM experiment showed that the plate type of the raw sample was changed to circle type, so the surface area ratio was increased. Above results suggested that waste shellfish were usable as absorbent in the viewpoint of the reuse of resource and the decrease of environmental pollution.

• Journal of the Korean Chemical Society
• /
• v.62 no.3
• /
• pp.187-190
• /
• 2018

A three-component coupling reaction of phenylacetylene, p-toluenesulfonyl azide, and water through copper catalysis is described to provide knowledge of spectroscopy and catalytic reactions and to introduce current research topics in organic chemistry for second-year undergraduate students. In the presence of stoichiometric amounts of phenylacetylene, p-toluenesulfonyl azide, and triethylamine, the reaction was performed with 4 mol% CuCl in water as the sole solvent and was completed in 1.5 h. A practical purification method and recrystallization of the crude reaction mixture resulted in the rapid isolation of the desired product with yields of 42~65%. Students characterized 4-methyl-N-(phenylacetyl)benzenesulfonamide by using melting-point determination, infrared spectroscopy, and nuclear magnetic resonance (NMR) spectroscopy. This experimental procedure and spectroscopic data analysis will serve as a platform for students to apply classroom knowledge in practical state-of-the-art research.

• Restorative Dentistry and Endodontics
• /
• v.6 no.1
• /
• pp.17-25
• /
• 1980

The purpose of this study was to evaluate the pulpal response against calcium hydroxide and zinc oxide containing various concentration of formocresol (0.1, 0.5, 1, 5, 10, 20 and 30%). The experiment was performed on dog's teeth (75 teeth from 5 dogs: Table 1.) and the teeth were routinly treated in laboratory procedures. Followings are the results obtained through microscopical examination. 1. In zinc oxide group, intlammatory reaction was severe in low concentrated formocresol and the (higher the concentration of formocresol the milder the inflammatory reaction was more evident. 2. In zinc oxide group, inflammatory change was milder at 3 weeks than 1 week, and proliferation of young connective tissue was seen at 3 weeks. 3. In calcium hydroxide group, inflammatory change in relation to the concentration of formocresol was not noticeable. 4. In calcium hydroxide group, repair process with decreased inflammatory reaction and fibrosis, and dentin bridge like layer was found at 3 weeks.