• Resources Recycling
• /
• v.12 no.4
• /
• pp.30-37
• /
• 2003

A kinetics study on the dissolution reaction of zinc-ferrite has been made with aqueous sulfuric acid in various temperature and concentration. Fraction reacted(R) and apparent rate constant(K) increased with increasing temperature and concentration of sulfuric acid solution. The rate of dissolution is shown by $1-(1-K)^{1/3}=Kt$ for the initial stage of the reaction in aqueous sulfuric acid, where K is apparent rate constant, R is fraction reacted and t is reaction time, respectively. Activation energy associated with reaction was determined to be 16.3 kcal/mole. The dissolution of zinc-ferrite in sulfuric acid solution is dissolved by sto-ichiometric composition, but Fe and Zn did not dissolved, respectively.

• Journal of the Korean Society of Combustion
• /
• v.5 no.1
• /
• pp.7-18
• /
• 2000

Numerical simulations of counterflow non-premixed $CH_4/C_2HCl_3/Air$ flames added 8%(by volume) C2HCl3 on the fuel side are conducted at atmospheric pressure using a detailed chemical reaction mechanism in order to understand the effect of strain rates. A detailed sensitivity analysis is also performed in order to assess the relative influence of each reaction on the flame established at a strain rate of 200s-1. The structure of flames (i.e., temperature, velocity, and concentration of species) established at both a strain rate of 150s-1 and 300s-1 are investigated. As the strain rate increases, the "flame zone" is restricted to a narrower range and the position of maximum temperature is shifted to the fuel side. The concentrations of major species, H2O, CO, H2, HCl, Cl2, and Cl are decreased with increased strain rate. The reaction involving chlorine, CH4 + Cl $\rightarrow$ CH3 + HCl, instead of the reaction, CH4 + H $\rightarrow$ CH3 + H2 influences the consumption of methane. C2HCl3 + OH $\rightarrow$ CHCl2 + CHOCl and HCl + OH $\rightarrow$ H2O + Cl, are major reactions, through which OH radicals are consumed.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.5
• /
• pp.298-303
• /
• 1988

Kinetic studies on cupric ion ($Cu^{2+}$) oxidation of 1-benzyl- and 1-aryl-1,4-dihydronicotinamides (XNAH) in aqueous solution were performed. In the presence of dioxygen ($O_2$), the reaction followed first order kinetics with respect to both XNAH and $Cu^{2+}$. The oxidation reaction was found to be independent and parallel to the acid-catalyzed hydration reaction of XNAH. The catalytic role of $Cu^{2+}$ for the oxidation of XNAH in the presence of $O_2$ was attributed to $Cu^{2+}/Cu^+$ redox cycle by the reactions with XNAH and $O_2$. The second order rate constants of the Cu2+ oxidation reaction kCu, and acid-catalyzed hydration reaction $k_H$ were strongly dependent on the nature of the substituents in 1-aryl moiety. The slopes of log $k_{Cu}$ vs log $K_H$ and log $k_{Cu}$ vs ${\sigma}_p$ of the substituents plots were 1.64 and -2.2, respectively. This revealed the greater sensitivity of the oxidation reaction rate to the electron density on the ring nitrogen than the hydration reaction rate. A concerted two-electron transfer route involving XNAH-$Cu^{2+}$ complex was proposed for mechanism of the oxidation reaction.

• Journal of the Korean Mathematical Society
• /
• v.44 no.4
• /
• pp.779-786
• /
• 2007

In this note, we consider a system of two reaction-diffusion equations with absorption, under homogeneous Dirichlet boundary. Using scaling methods, we establish the blow-up rate estimates.

• Elastomers and Composites
• /
• v.12 no.1
• /
• pp.27-32
• /
• 1977

The kinetics of azo-coupling reaction of N-acetyl-H-acid (1-acetamino-8-hydroxynaphthalene-3, 6-disulfonic acid) with several heterocyclic diasonium compounds such as diazotiged 3-aminopyridine, 3-aminoquinoline, 8-aminoauinoline and aniline was studied. It was found that reactions proceeded at remarkably different rate. Reaction rate was in increasing order; 3-aminopyridine, 3-aminoquinoline, 8-aminoauinoline and aniline. And the activation energies were 9.62, 10.10, 10.39, 10.70 Kcal/mole, respectively. Especially, the rate constant of 3-aminopyridine was 100 times larger than that of benzene diasonium compound even in strong acidity. Hammett plot was also made of the rate constants obtained against the heterocyclic substituent constants reported in the literature. A good linear relationship was obtained and the reaction constant of N-acetyl H-acid was calculated to be 3.14.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.4
• /
• pp.466-475
• /
• 2009

A numerical analysis of reactive flow in a liftoff flame is accomplished to elucidate the characteristics of flame propagation velocity and volume integral of reaction rate with the variation of fuel injection velocity at the fuel rich region, fuel lean region and diffusion flame region. The increase of fuel injection velocity enhances flame propagation velocity, but its effect on the flame propagation velocity is not much greater under 4%. The increase of fuel injection velocity affects directly and linearly on the flame surface area in the fuel rich region and so enhances volume integral of reaction rate to accommodate the increment of fuel.

• Journal of Surface Science and Engineering
• /
• v.32 no.2
• /
• pp.172-181
• /
• 1999

The effect of the DMAB concentration, temperature, deposition time, and stabilizer concentration on the precipitation reaction of the electroless nickel plating using dimethylamine borane (DMAB) as reducing agent was investigated to by the weight gain and electrochemical method. The deposition rate was dependent with DMAB concentration. The polarization resistance of the precipitation reaction was reduced with DMAB concentration. The precipitation reaction rate of Ni-B deposits was controlled by the oxidation rate of DMAB as the source of electron. The boron content of the deposit was constant at about 5.5wt%, even when DMAB concentration in the solution was increased. The effect of temperature and stabilizer ($Pb(NO_3)_2$) concentration on deposition rate was shown to have co-dependent behaviors.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.1
• /
• pp.69-75
• /
• 2013

The recovery of Zr from Zircaloy-4 (Zry-4) cladding hulls was demonstrated to investigate the effect of the oxidation process on the reaction rate of the chlorination reaction. In chlorination reaction experiments performed for 6 h, where reaction products were collected every 2 h, it was observed that a significant decrease in the reaction rate was caused by the oxidation process ($500^{\circ}C$, 10 h under an air atmosphere) within the reaction period of 0 - 2 h. The amount of reaction residue increased from 0.95 to 1.65wt% of initial weights in the fresh and Zry-500-10 (Zry-4 hulls oxidized at $500^{\circ}C$ for 10 h under an air atmosphere) hulls, respectively. The purity of the recovered Zr was identical at 99.61wt% for the fresh Zry-4 and Zry-500-10 hulls. Quantitative analysis of the chlorination reaction rate was performed by varying the reaction time from 0.5 to 1.0, 2.0, and 4.0 h. The fitting results showed that the relationship between weight loss and reaction time can be interpreted by a linear line with a slope of 23.35wt%/h for the fresh Zry-4 case, while two linear lines were necessary to fit the results of Zry-500-10. In addition, the slope values were 17.12 and 27.16wt%/h for (0 - 20) and (20 - 100)wt% loss regions, respectively.

• Journal of Environmental Science International
• /
• v.8 no.2
• /
• pp.241-248
• /
• 1999

The photocatalytic decolorization and photodegradation of wastewater contamininated with dyes such as methyleneblue tetrahydrate(MBT), methyl orange(MO), phenol red(PR) and the mixed dyes have been studied using a batch reactor in the presence of aerotropic and titania. Degussa P25 titanium oxide was used as the photocatalyst and proved to be effective for the dyes-degradation when irradiated with UV-light source emitting the wavelength of 253.7 nm in the presence of air. In addition to removing the color from the wastewater, the photocatalytic reaction simultaneously reduced the COD and optical density which suggests that the dissolved organic compounds have been photooxidized. The reaction rate of disappearance of the dyes were measured as a function of the irradiation times. The photooxidative procedure of the aquatic solution have the first order reaction-kinetics. The rate constants were increased in the order of PR < MBT < $gL^{-1}-TiO_2$ powder were irradiated with the UV -light source.

• Journal of Korean Society on Water Environment
• /
• v.23 no.5
• /
• pp.659-664
• /
• 2007

The objective of this study is to evaluate the detoxification method for the endocrine disrupting chemicals by manganese oxide. Manganese coated sand and bisphenol-A (BPA) was used as the reactive medium and the contaminant. Results showed that manganese oxide effectively degrades BPA by oxidative coupling reaction. The nonlinear oxidative coupling reaction orders were obtained for BPA and oxide, respectively. The reaction rate of BPA decreased as initial BPA concentration increased, as oxide loading decreased and as pH increased. The higher ionic strength, the higher reaction rate was observed. Divalent cations were adsorbed on the oxide surfaces, resulting in the decreased degradation rate of BPA.