• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.65-68
• /
• 1999

A well oriented Bi2212 superconductor thick films were fabricated by screen printing with a Cu-free Bi-Sr-Ca-O mixture powder on a copper plate and heat-treating at 820-88$0^{\circ}C$ for several minute in air. During the heat-treatment, the printing layer partially melted by reaction between the Cu-free precursor and CuO of the oxidizing copper plate. In the partial melting state, it is believed that the solid phase is Bi-free phase and Cu-rich phase and the composition of the liquid is around Bi : Sr : Ca : Cu = 2 : 2 : 0 : 1. Following the partial melting, the Bi2212 superconducting phase is formed at Bi-free phase/liquid interface by nucleation and grows. With decreasing the Bi composition in the precursor powder, the critical temperature(T$_{c}$) of the fabricated Bi2212 thick film increased to about 79 K.K.

• 한국식품과학회지
• /
• 제2권1호
• /
• pp.67-71
• /
• 1970

본 실험(本 實驗)에서는, amylase 활성(活性)을 측정(測定)하기 위하여 starch-agar-gel-plate를 만들어 cork borer로써 9mm의 구멍을 뚫고, 각(各) 농도(濃度)의 효소(酵素)를 주입(注入)하여 일정(一定)한 온도(溫度)에서 일정(一定)한 시간(時間)동만 반응(反應)시킨 후, 0.1N-iodine액(液)으로 분해(分解)하지 않은 starch를 착색시켜, 착색안된 무착색(無着色) zone의 직경을 측정(測定)해서 비교 검토한 것으로 서 이 방법(方法)을 "cork borrer method"라고 칭하였다. starch-agar-gel-plate 상(上)에서의 무착색(無着色) zone 형성(形成)의 최적(最適) pH는, Bacillus 균(菌)이 생산(生産)하는 amylase인 biotex, spitase 등은 중성(中性) 내지 알카리성(性)에서, 사상균이 생산(生産)하는 효소인 mucor-rennin, gluco-amylase, biodiase 등에 있어서는 pH $5{\sim}7$의 범위이다. 무착색(無着色) zone 형성(形成)직경은 전분농도(濃度)가 적을수록 유리하고, 반응시간(反應時間)이 길수록, amylase activity가 강할수록 커진다. 한편 반응온도(反應溫度)에 의한 영향은 $10^{\circ}C$보다 $50^{\circ}C$에서 무착색(無着色) zone이 크게 형성(形成)된다. 따라서 starch 온도(溫度) 및 pH가 일정(一定)한 starch-agar-gel-plate를 만들고, 반응시간(反應時間) 반응온도(反應溫度) 등을 일정하게 하여주면 amylase activity 를 능률있게 측정(測定)할 수 있다. 끝으로 본 연구(本 硏究)를 위하여 연구비(硏究費)를 지급(支給)하여주신 연합재단(聯合財團)과 대학원장 이길상박사(大學院長 李吉相博士), 또 효소(酵素)를 제공하여 주신 삼중효소공업주식회사(三中酵素工業株式會社)의 김동진사장(金東振社長). 천야제약주식회사(天野製藥株式會社)(일본(日本)) 등의 여러분께 진심으로 감사드립니다.

• Archives of Plastic Surgery
• /
• 제36권3호
• /
• pp.318-321
• /
• 2009

Purpose: The bony mallet finger injury is generally managed by conservative treatments, but operative treatments are needed especially when the fractures involve above 30% of articular surface or distal phalanx is accompanied by subluxation in the volar side. This is the reason they often result in chronic instability, articular subluxation and unsatisfactory cosmetic. In this report, We describe new method using the hook plate as an operative treatment of Mallet finger deformity. Methods: Among 13 patients with Mallet finger deformity who came from February 2006 to February 2008, six patient were included in surgical indication. Under local anesthesia, H or Y type incision was made at the DIP joint area. After the DIP joint extension, the hook plate was put on the fracture line, and one self tapping screw was used for fixation. 2 hole plate which was one of the holes in 1.5 mm diameter was cut in almost half and bended through approximately $100^{\circ}$. Results: In all six cases which applied the hook plate, complications such as loss of reduction or nail deformity were not seen. In only one patient, hook pate was removed due to inflammatory reaction after surgery. At 2 weeks after operation, active motion of DIP joint was performed. The result was satisfactory not only cosmetically but also functionally. At 6 weeks after operation, the range of motion of DIP joint was average $64^{\circ}$. Conclusion: The purpose of the operative treatment for mallet finger deformity using the hook plate is to provide anatomical reduction with rigid fixation and to prevent contracture at the DIP joint. While other operations take 6 weeks, the operation using the hook plate begins an active motion at 2 weeks after operation. Complication rate was low and the method is rather simple. Thus, the operation using the hook plate is recommended as a good alternative method of the mallet finger deformity treatment.

• 한국강구조학회 논문집
• /
• 제26권1호
• /
• pp.43-53
• /
• 2014

단일판접합(Single Plate Connections, 이하 SPC라 함)은 단순전단접합의 일종으로 한 장의 강판을 지지부재인 기둥이나 큰보의 웨브에 공장용접하고 보를 현장고력볼트로 접합하기 때문에 시공이 간편하고, 경제성이 있어 강구조 및 합성구조에서 널리 사용되고 있다. 일반형 단일판접합부의 고력볼트는 수직 1열로 2~12개가 사용되며, 단순보의 단부에서 필요한 회전유연성을 확보하기 위하여 고력볼트직경과 구멍형태에 따라 판의 두께를 제한하여 설계한다. SPC에서 편심전단을 받는 고력볼트군의 강도를 산정할 때, 고력볼트의 전단강도나, 판의 지압강도 또는 찢김(Tear-out)강도 중 최소값에 의해 설계강도가 결정되는데, 만약 연단고력볼트의 수직연단거리에 의한 찢김에 의해 고력볼트군의 강도가 결정될 때에는 매우 보수적으로 설계된다. 따라서 본 연구에서는 고력볼트의 반력각도에 의한 실제 경사연단거리를 구하고 이를 근거로 설계강도를 산정하는 설계절차를 제안하였다. 편심전단을 받는 '약-판/강-고력고력볼트' 설계모델의 일반형 단일판접합부 고력볼트군 해석을 위해 탄성벡터법(EVM)과 소성법인 수간회전중심법(ICM)을 이용해 그 효과를 비교하였다. 또한 실용적이고 편리한 설계를 위하여 경사연단거리를 고려한 일반형 단일판접합부의 설계도표를 제안한다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권1호
• /
• pp.67-73
• /
• 2017

본 연구에서는 LRB 받침을 갖는 플레이트 거더교를 해석 대상 교량으로 하고 편구배별 곡선반경과 사각을 해석변수로 하여 교량받침의 반력에 미치는 영향을 평가하고자 하였다. 지진파로는 El-Centro 지진 기록과 인공지진파를 각각 교축방향과 교축직각방향으로 적용하고 3D 해석을 수행하였다. 해석결과, 곡선교 내측과 예각부에서 부반력이 발생될 가능성이 높은 위치로 나타났으며, 또한, 교축 직각방향으로 지진이 작용하였을 때가 또한 가능성이 높은 조건으로 해석되었다. 그 이외에도 직선교보다는 곡선교이면서 곡률반경이 작고 사각이 작을수록 부반력의 발생 가능성이 높은 것으로 나타났다. 따라서 교량의 부반력 발생여부는 지진파의 종류 및 교량의 편구배, 곡선반경, 사각 등을 종합적으로 고려하여 검토하여야 할 것으로 판단된다.

• 한국축산식품학회지
• /
• 제41권5호
• /
• pp.894-904
• /
• 2021

Microencapsulation is a protective process for materials that are sensitive to harsh conditions encounted during food manufacture and storage. The objectives of this research were to manufacture a milk protein-based delivery system (MPDS) containing Lactobacillus rhamnosus GG (LGG) using skim milk powder and to investigate the effects of manufacturing variables, such as reaction temerpature and holding time, on the physiccohemical properties of MPDS and viability of LGG under dairy food processing and storage conditions. MPDS was prepared using chymosin at varing reaction temperatures from 25℃ to 40℃ for 10 min and holding times from 5 to 30 min at 25℃. The morphological and physicochemical properties of MPDS were evaluated using a confocal laser scanning microscope and a particle size analyzer, respectively. The number of viable cells were determined using the standard plate method. Spherical-shaped MPDS particles were successfully manufactured. The particle size of MPDS was increased with a decrease in reaction temperature and an increase in holding time. As reaction temperature and holding time were increased, the encapsulation efficiency of LGG in MPDS was increased. During pasteurization, the use of MPDS resulted in an increase in the LGG viability. The encapsulation of LGG in MPDS led to an increase in the viability of LGG in simulated gastric fluid. In addition, the LGG viability was enhanced with an increase in reaction temperature and holding time. In conclusions, the encapsulation of LGG in MPDS could be an effective way of improving the viability of LGG during pasturization process in various foods.

• Current Research on Agriculture and Life Sciences
• /
• 제24권
• /
• pp.9-16
• /
• 2006

Ultraweak photons could be emitted from the chemical reaction without any electromagnetic radient. These chemiluminescence could be detected by highly sensible photomultiplier recently. We will introduce the principal of chemiluminescence generation reaction, and the application studies in the determination of food-borne microorganisms in field. The counts of surface contaminated microorganism in mackeral and chicken for cold storage determined by ATP-chemiluminescence method had good correlation with the counts by standard agar plate method. However, there was little correlation between 2 methods in ginseng powder whose microbial counts were lower than 10,000 CFU.

• 전기학회논문지
• /
• 제57권1호
• /
• pp.137-141
• /
• 2008

Biochip, which implements bioanalytical process on a tiny surface, is one of candidates for medical diagnosis, drug screening, and molecular sensing. In general, a type of biochip based on microfluidics is composed of microcomponents including microchannel, pump, and valve, which require complicated processes. In this study, gray-scale photolithography(GSPL) was applied to fabricate a biochip with multiple layers. A mould for casting PDMS(polydimethylsiloxane) channel, was fabricated using GSPL. A gray-photomask was prepared by printing gray patterns on a high-quality glossy paper followed by photoreducing by 10:1 onto the photo-film. The formation of multiple layers was studied according to the change of gray level of pattern and the developing time. A biochip composed of a weir(multiple layer structure) and a reaction chamber in a single microchannel was fabricated in a glass plate. Finally, we investigated the application of biochip to antigen-antibody reaction by packing the microbead coated with antibody.

• 약학회지
• /
• 제22권1호
• /
• pp.22-26
• /
• 1978

The purposes of this investigation were to study the characteristic properties of bismuthoxynitrate formed by hydrolysis of bismuthnitrate according to various reaction conditions and to propose the property difference between synthesized pearl pigment and bismuthsubnitrate as pharmaceuticals by means of X-ray diffraction, IR, DTA and TGA. The pearl pigment could be obtained by reaction of bismuth nitrate-diluted nitric acid solution with cold water (5.deg.) agitation at lower pH. The pearl pigment was BiO. NO$_{3}$. 2H$_{2}$O. in composition and crystalline form was thin plate of monoclinic system and its combination with water was assumed to be hydrated hydrous form between Bi-H$_{2}$O bond. On the other hand, bismuthsubnitrate was 5BiO.4NO$_{3}$.6H$_{2}$O in composition and crystalline form was pillar of rhombic system and the bond between Bi and H$_{2}$O molecules was assumed to be hydrous form. The different properties between two compounds in structure are presumed to be caused by the hydrolysing conditions of bismuthnitrate respectively.

• Smart Structures and Systems
• /
• 제10권2호
• /
• pp.111-130
• /
• 2012

Satellites with flexible lightweight solar panels are sensitive to vibration that is caused by internal actuators such as reaction or momentum wheels which are used to control the attitude of the satellite. Any infinitesimal amount of unbalance in the reaction wheels rotors will impose a harmonic excitation which may interact with the solar panels structure. Therefore, quenching the solar panel's vibration is of a practical importance. In the present work, the panels are modeled as laminated composite beam using first-order shear deformation laminated plate theory which accounts for rotational inertia as well as shear deformation effects. The vibration suppression is achieved by bonding patches of piezoelectric material with suitable dimensions at selected locations along the panel. These patches are actuated by driving control voltages. The governing equations for the system are formulated and the dynamic Green's functions are used to present an exact yet simple solution for the problem. A guide lines is proposed for determining the values of the driving voltage in order to suppress the induced vibration.