• 대한화학회지
• /
• 제22권4호
• /
• pp.221-228
• /
• 1978

2,4-Dinitrohalo (F,Br) benzene과 파라치환아닐린간의 반응속도를 아세토니트릴-메탄올 혼합용매하에서 측정하였다. 2,4-Dinitrobromobenzene과 치환아닐간의 반응에서 메탄올은 친핵촉매 현상만을 보였으며, 2,4-dinitrofluorobenzene과 치환아닐린간의 반응에서는 메탄올은 양쪽성(친핵 및 친전자) 촉매현상을 보였다. 메탄올에 의한 친핵촉매현상은 아마도 천이상태에서 알코올기의 수소와 이탈기의 플루오르사이의 수소결합에 의해 설명될 수 있으며 친전자촉매현상은 알코올기의 산소와 아닐린의 아민기 수소사이의 수소결합에 기인되는 것임을 알았다.

• 대한기계학회논문집B
• /
• 제32권8호
• /
• pp.597-603
• /
• 2008

The catalyzed diesel particulate filter (CDPF) is widely used for collecting soot from the exhaust gas of diesel engine. However, the CDPF need being regenerated after the soot accumulation. It is important to know characteristics of regeneration for CDPF with variation of exhaust gas temperature and composition. This study presents characteristics of regeneration according to variable exhaust gas composition. Furthermore, the experiment were performed variable gas temperature of CDPF inlet gas at each exhaust gas composition. Test-rig is used to control at each in let gas temperature and composition during regeneration of CDPF. Reaction intensity($I_c$) is used to compare with each result. Experimental results indicated that increased concentration of $NO_x$ and $O_2$ lead to regenerate more greatly. Also, higher temperature of exhaust gas leads to make CDPF cleaner.

• Bulletin of the Korean Chemical Society
• /
• 제33권4호
• /
• pp.1290-1296
• /
• 2012

Fenton reaction and iron autoxidation have been debated for the major process in ROS mediated DNA cleavage. We compared both processes on iron oxidation, DNA cleavage, and cyclic voltammetric experiment at different pHs. Both oxidation reactions were preferred at basic pH condition, unlike DNA cleavage. This indicates that iron oxidation and the following steps probably occur separately. The ROS generated from autoxidation seems to be superoxide radical since sod exerted the best inhibition on DNA cleavage when $H_2O_2$ was absent. In comparison of cyclic voltammograms of $Fe^{2+}$ in NaCl solution and phosphate buffer, DNA addition to phosphate buffer induced significant change in the redox cycle of iron, indicating that iron may bind DNA as a complex with phosphate. Different pulse voltammogram in the presence of ctDNA suggest that iron ions are recyclable at acidic pH, whereas they may form an electrically stable complex with DNA at high pH condition.

• 한국재료학회지
• /
• 제18권4호
• /
• pp.218-221
• /
• 2008

A $Fe(OH)_2$ suspension was prepared by mixing iron sulfate and a weak alkali ammonia solution. Following this, iron oxides were synthesized by passing pure oxygen through the suspension (oxidation). The effects of different reaction temperatures ($30^{\circ}C$, $50^{\circ}C$, $70^{\circ}C$) and equivalent ratios ($0.1{\sim}10.0$) on the formation of iron oxides were investigated. An equilibrium phase diagram was established by quantitative phase analysis of the iron oxides using the Rietveld method. The equilibrium phase diagram showed a large difference from the equilibrium phase diagram of Kiyama when the equivalent ratio was above 1, and single $Fe_3O_4$ phase only formed above an equivalent ratio 2 at all reaction temperatures. Kiyama synthesized iron oxide using iron sulfate and a strong alkali NaOH solution.

• 한국세라믹학회지
• /
• 제45권1호
• /
• pp.43-47
• /
• 2008

The photocatalyst of $TiO_2$ coated on a fly ash composites (TCF) was prepared from precipitant dropping method to remove the acetaldehyde by photocatalytic reaction. The TCF were characterized by crystal aize, crystal structure and specific surface area. The photodegradation of acetaldehyde has been investigated using a UV-illuminated fixed photocatalytic reactor with TCF catalyst and P-25 catalyst in gas phase. The effect of photodegradation reaction conditions, such as initial concentration of acetaldehyde, concentration of oxidant in mixed gas and the light intensity on the photodegradation of acetaldehyde were investigated. P-25 catalyst showed the highest photodegradation of acetaldehyde and anatase $TiO_2$ coated TCF showed higher decomposition rate than rutile coated TCF. The photodegradation rate of acetaldehyde increased with the decrease of flow rate, initial concentration of acetaldehyde ($C_i$) and water vapor, however, it was increased with the increas of UV light intensity. The optimum conditions were weight of TCF=10 g, flow rate=50 ml/min $C_i$=100 ppm, concentration of oxygen=20%, concentration of water vapor=100 ppm.

• 한국연소학회지
• /
• 제21권2호
• /
• pp.7-14
• /
• 2016

Evaporation and combustion characteristics of fuel droplet with carbon nanoparticle were investigated in a rapid compression machine(RCM). RCM is an experimental equipment to simulate one compression stroke of reciprocating engine. Nitrogen was charged into reaction chamber for evaporation experiment, while oxygen was charged for combustion experiment. N990 carbon black and n-heptane were used to synthesize the carbon nanofluids. Surfactant, span80, was used to make synthesis easier. The droplet pictures were taken using a high speed camera with 500 frames per second. Thermocouple, of which tip is $50{\mu}m$, was used not only to measure transient bulk temperature, but also to suspend the droplet. Reaction chamber temperature was calculated from pressure data. The evaporation rate of nanofluids was improved compared to pure fuel. The ignition delay was promoted due to the nanoparticle, but the burning rate was decreased.

• 한국물환경학회지
• /
• 제21권3호
• /
• pp.284-288
• /
• 2005

In this study, photochemical advanced oxidation processes (AOPs) utilizing the Photo Fenton reaction ($Fe^{2+}+H_2O_2+UV$) were investigated in lab-scale experiments for the treatment of livestock wastewater. For the experimets, the livestock wastewater was pretreated by coagulation with $3,000mg/L\;FeCl_3$. The optimal conditions for Photo-Fenton processes were determined: pH was 5, the concentration of ferrous ion (Fe II) was 0.01 M. The concentration of hydrogen peroxide was 0.1 M, and molar ratio ($Fe^{2+}/H_2O_2$) was 0.1. The optimal reaction time was 80 min. Under the optimal condition of Photo-Fenton process, chemical oxygen demand (COD), color and fecal coliform removal efficiencies were about 79, 70, and 99.4%, respectively and sludge production was 7.5 mL from 100 mL of solution.

• 상하수도학회지
• /
• 제33권1호
• /
• pp.55-62
• /
• 2019

The respirometric technique has been used to analyze the nitrification process in a sequencing batch reactor(SBR) treating municipal wastewater. Especially the profile of the respiration rate very well expressed the reaction characteristics of nitrification. As the nitrification process required a significant amount of oxygen for nitrogen oxidation, the respiration rate due to nitrification was high. The maximum nitrification respiration rate, which was about $50mg\;O_2/L{\cdot}h$ under the period of sufficient nitrification, was related directly to the nitrification reaction rate and showed the nitrifiers activity. The growth rate of nitrifiers is the most critical parameter in the design of the biological nutrient removal systems. On the basis of nitrification kinetics, the maximum specific growth rate of nitrifiers in the SBR was estimated as $0.91d^{-1}$ at $20^{\circ}C$, and the active biomass of nitrifiers was calculated as 23 mg VSS/L and it was about 2% of total biomass.

• Bulletin of the Korean Chemical Society
• /
• 제20권3호
• /
• pp.355-361
• /
• 1999

To improve the volatility and stability of lead complexes, the principle of stabilization by saturating the metal coordination sphere by intramolecular coordination through a β-diketonates with an ethereal group has was tested. Several new lead complexes with alkoxyalkyl-substituted β-diketonates, Pb(R1C(O)CHC(O)(CH2)3OR2)2(Rl=t-Bu, Me, OMe, i-Pr, R2=Me, Et), or carboxylate, Pb(OC(O)(CH2)3OEt)2, were prepared by the reaction between Pb(OAc)2 and corresponding alkoxyalkyl-substituted β-diketonates, and they were found to have a viscous liquid phase. The nature of the head (β-diketonate or carboxylate) or tails and substituents of β-diketonates appeared not to be important for the formation of the liquid phase. It is worth mentioning that Pb(OAc)2, which has limited use due to its low solubility, was successfully adopted as a starting material for the preparation of new lead complexes. Easy hydrolysis, reaction with HCl, and 13C NMR spectra indicated that tail portions were not coordinated to the metal as a copper derivative, Cu(t-BuC(O)CHC(O)(CH2)3OMe)2. All these complexes were not volatile enough for the MOCVD experiments, but a methyl derivative, Pb(MeC(O)CHC(O)(CH2)3OEt)2, showed some sublimation. The methoxy derivative, Pb(MeOC(O)CHC(O)(CH2)3OEt)2, was thermally unstable due to possible equilibrium between species coordinating with a keto oxygen atom and an ethereal atom of a methoxy group, which was confirmed by IR and 13C NMR spectra.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3194-3201
• /
• 2023

In water-cooled power reactor, hydrogen is generated in case of steam zirconium reaction during severe accident condition and later on in addition to hydrogen; CO is also generated during molten corium concrete interaction after reactor pressure vessel failure. Passive Autocatalytic Recombiners (PARs) are provided in the containment for hydrogen management. The performance of the PARs in presence of hydrogen and carbon monoxide along with air has been evaluated. Depending on the conditions, CO may either react with oxygen to form carbon dioxide (CO2) or act as catalyst poison, reducing the catalyst activity and hence the hydrogen conversion efficiency. CFD analysis has been carried out to determine the effect of CO on catalyst plate temperature for 2 & 4% v/v H₂ and 1-4% v/v CO with air at the recombiner inlet for a reported experiment. The results of CFD simulations have been compared with the reported experimental data for the model validation. The reaction at the recombiner plate is modelled based on diffusion theory. The developed CFD model has been used to predict the maximum catalyst temperature and outlet species concentration for different inlet velocity and temperatures of the mixture gas. The obtained results were used to fit a correlation for obtaining removal rate of carbon monoxide inside PAR as a function of inlet velocity and concentrations.