• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.3
• /
• pp.259-263
• /
• 2004

In the manufacture progress of LCD or semiconductor, there are used many kinds of gas like erosion gas, dilution gas, toxic gas as a progress which used these gas there are required high puritize to increase accumulation rate of semiconductor or LCD materials work progress of semiconductor or LCD it demand many things like the material which could minimize metallic dust that could be occured by reaction between gas and transfer pipe laying material, illumination of the surface, emition of the gas, metal liquation, welding etc also demand quality geting stricted. Material-Low-sulfur-contend (0.007-0010), vacuum-arc-remelt(VAR), seamless, high-purity tubing material is recommend for enhance welding lower surface defect density All wetted stainless steel surface must be 316LSS elecrto polishinged with ${\leq}0.254{\mu}m$($10.0{\mu}in$) Ra average surface finish, $Cr/Fe{\geq}1.1$ and $Cr_2O_3$ thickness ${\geq}25{\AA}$ From the AES analytical the oxide layer thickness (23.5~36 angstroms silicon dioxide equivalent) and chromum to iron ratios is similar to those generally found on electropolished stainless steel., molybdenum and silicon contaminants ; elements characteristic of stainless steel (iron, nickel and chromium); and oxygen were found on the surface Phosphorus and nitrogen are common contaminants from the electropolish and passivation steps.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.1
• /
• pp.52-61
• /
• 1998

Nitrification and denitrification are important processes in the landfill site as they are deeply related with degradation and stabilization of refuse. Also nitrous oxide ($N_2O$) which is released from both nitrification and denitrification is known as greenhouse gas (GHG). The purpose of this study was to clarify the process by which $N_2O$ produced using $^{15}N$ isotope. Nitrate which was labeled to 10.08% with $^{15}KNO_3$ was used and $N_2O$ was analyzed with GC mass. Results was that even also when $O_2$ of bulk was 15%, $N_2O$ was released from denitrification. And as concentrations of $O_2$ increase, sum of $N_2O$ was released from denitrification. And as concentrations of $O_2$ increase, sum of $N_2O$ and $N_2$ was decreased and ratios of $N_2O$ in the reduced gases were increased. FISH technics also adaped to confirm whether which of nitrifiers existed in the substrates. When NEU was used of which the target was ammonia oxidizing bacteria, nitrifier was not detected at all. So it was confirmed that during the reaction denitrification was dominant process. Total bacteria distributions which were detected by EUB probe explained that as $O_2$ increase the number of bacteria also increase, but between the 10-15% of $O_2$ there was no any differences.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.12
• /
• pp.969-976
• /
• 2011

In this study we aims to evaluate the effects of 1/3 mol% $Co_3O_4$ addition on the reaction, microstructure development, resultant electrical properties, and especially the bulk trap and grain boundary properties of $ZnO-Bi_2O_3-Sb_2O_3$ (Sb/Bi=2.0, 1.0, and 0.5) system (ZBS). The samples were prepared by conventional ceramic process, and characterized by XRD, density, SEM, I-V, impedance and modulus spectroscopy (IS & MS) measurement. In addition of $Co_3O_4$ in $ZnO-Bi_2O_3-Sb_2O_3$ (ZBSCo), the phase development, density, and microstructure were controlled by Sb/Bi ratio. Pyrochlore on cooling was reproduced in all systems. The more homogeneous microstructure was obtained in ZBSCo (Sb/Bi=1.0) system. In ZBSCo, the varistor characteristics were improved drastically (non-linear coefficient ${\alpha}$=23~50) compared to ZBS. Doping of $Co_3O_4$ to ZBS seemed to form $V^{\cdot}_o$(0.33 eV) as dominant defect. From IS & MS, especially the grain boundary of Sb/Bi=0.5 system is composed of electrically single barrier (0.93 eV) and somewhat sensitive to ambient oxygen with temperature.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.108-114
• /
• 2020

In this study, NH₃-selective catalytic oxidation (SCO) efficiencies according to calcination/reduction conditions were compared when preparing various Ru[1]/TiO₂ catalysts. The Ru[1]/TiO₂ red catalyst had better NH₃ conversion and NH₃ to N₂ conversion than those of Ru[1]/TiO₂ cal. Physico-chemical properties of Ru[1]/TiO₂ catalysts were confirmed by Brunauer Emmett Teller (BET), X-ray diffraction (XRD), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS) and temperature programmed reduction (H₂-TPR) analyses, and the properties were shown to affect the dispersion and surface adsorption oxygen species (O_β) ratio of the active metal.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.1881-1886
• /
• 2010

Hydrothermal reaction of zinc(II) salts with 5-sulfoisophthalic acid monosodium salt ($NaO_3SC_6H_3$-1,3-(COOH)$_2$, $NaH_2$-SIP) and 1,10-phenanthroline (phen) led to two new compounds, [Zn(phen)$_3$$\cdot2H_2SIP\cdot4H_2O$ (1) and [Zn(phen)$_2(H_2O)_2]\cdot2H_2SIP\cdot2H_2O$ (2). They were characterized by element analysis, IR spectroscopy, thermalgravimetric analysis (TGA), X-ray powder diffraction (XRD), and single-crystal X-ray diffraction. Both compounds 1-2 represent the first example of Zn/phen/SIP system. The Zn (II) ion in 1 is six-coordinated by six nitrogen atoms from three phen molecules, and the $H_2SIP^-$ ligands engage in the formation of hydrogen bond. The Zn(II) ion in 2 is coordinated by four nitrogen atoms from two phen molecules and two oxygen atoms from two water molecules. Moreover, both 1 and 2 are assembled into 3D supramolecular architectures by hydrogen bonds (O-H$\ldots$O) and $\pi-\pi$ interactions. Solvent water molecules occupying voids of the compounds serve as receptors or donors of the extensive O-H$\ldots$O hydrogen bonds.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.1149-1156
• /
• 2008

The conformational study on neutral and zwitterionic L-alanines (N-Ala and Z-Ala, respectively) and the transition state (TS) for their interconversion is carried out using ab initio HF and density functional B3LYP methods with the self-consistent reaction field method in the gas phase and in solution. At both the HF and B3LYP levels of theory, the local minimum N1 for N-Ala is found to be most preferred in the gas phase and a weak asymmetric bifurcated hydrogen bond between the amino hydrogens and the carbonyl oxygen appears to play a role in stabilizing this conformation. The local minima N2a and N2b are found to be the second preferred conformations, which seem to be stabilized by a hydrogen bond between the amino nitrogen and the carboxylic hydrogen. The relative stability of the local minimum N2b is remarkably increased in solution than that in the gas phase. The local minimum N2b becomes more stable than the local minimum N2a in most of the solution. On the whole the relative free energies of Z-Ala and TS become more lowered, as the solvent polarity increases. N-Ala prevails over Z-Ala in aprotic solutions but Z-Ala is dominantly populated in ethanol and water. In aprotic solutions, the population of Z-Ala increases somewhat with the increase of solvent polarity. The barrier to Z-Ala-to-N-Ala interconversion increases on the whole with the increase of solvent polarity, which is caused by the increase of stability for Z-Ala.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.8
• /
• pp.1491-1494
• /
• 2008

A novel platinum aminoalkoxide complex, Pt$(dmamp)_2$ has been prepared by the reaction of cis-$(py)_2PtI_2$ with two equivalents of Na(dmamp) (dmamp = 1-dimethylamino-2-methyl-2-propanolate). Single-crystal X-ray crystallographic analysis shows that the Pt(dmamp)2 complex keeps a square planar geometry with each two nitrogen atoms and two oxygen atoms having trans configuration. Platinum films have been deposited on TaN/ Ta/Si substrates by metal organic chemical vapor deposition (MOCVD) using Pt$(dmamp)_2$. As-deposited platinum thin films did not contain any appreciable amounts of impurities except a little carbon. As the deposition temperature was increased, the films resistivity and deposition rate increased. The electrical resistivity (13.6 $\mu\Omega$cm) of Pt film deposited at 400 ${^{\circ}C}$ is a little higher than the bulk value (10.5 $\mu\Omega$cm) at 293 K. The chemical composition, crystalline structure, and morphology of the deposited films were investigated by X-ray photoelectron spectroscopy, X-ray diffraction, and atomic force microscopy.

• Journal of the Korean Chemical Society
• /
• v.31 no.2
• /
• pp.197-202
• /
• 1987

Sigmatropic rearrangement of cis and trans-2-methyl-N-phenyl-1,3-oxathiolane-2-acetamide (b) and (c) gave unisolable sulfenic acids (d) and (f), respectively. These sulfenic acids were confirmed by deuterium exchange reactions involving 2-methylene and 2-methyl groups. The reactions also showed that no isomerization between the cis and trans sulfoxides (b) and (c) occurred under neutral conditions. However, the isomerization took place in the presence of acid catalyst. Stereospecific recyclization of sulfenic acids to the sulfoxides is attributable to possible hydrogen bonding between sulfenyl oxygen and NH proton or it arises from the geometrical requirements of the reacting bond and atoms in the reverse sigmatropic rearrangement. In the oxidation of 1, 3-oxathiolane, cis sulfoxide (b) could be obtained selectively in high yield by using $H_2O_2$-benzene seleninic acid.

• Journal of Electrochemical Science and Technology
• /
• v.8 no.4
• /
• pp.265-273
• /
• 2017

Solid-state alkaline water electrolysis is a promising method for producing hydrogen using renewable energy sources such as wind and solar power. Despite active investigations of component development for anion exchange membrane water electrolysis (AEMWE), understanding of the device performance remains insufficient for the commercialization of AEMWE. The study of assembled AEMWE devices is essential to validate the activity and stability of developed catalysts and electrolyte membranes, as well as the dependence of the performance on the device operating conditions. Herein, we review the development of catalysts and membranes reported by different AEMWE companies such as ACTA S.p.A. and Proton OnSite and device operating conditions that significantly affect the AEMWE performance. For example, $CuCoO_x$ and $LiCoO_2$ have been studied as oxygen evolution catalysts by Acta S.p.A and Proton OnSite, respectively. Anion exchange membranes based on polyethylene and polysulfone are also investigated for use as electrolyte membranes in AEMWE devices. In addition, operation factors, including temperature, electrolyte concentration and acidity, and solution feed methods, are reviewed in terms of their influence on the AEMWE performance. The reaction rate of water splitting generally increases with increase in operating temperature because of the facilitated kinetics and higher ion conductivity. The effect of solution feeding configuration on the AEMWE performance is explained, with a brief discussion on current AEMWE performance and device durability.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.139.1-139.1
• /
• 2016

Multiferroic materials are of great interest because of its potential applications in the design of devices combining magnetic, electronic and optical functionalities. Among various multiferroic materials, $BiFeO_3$(BFO) is known to be one of the intensively focused mainly due to the possibility of multiferroism at device working temperature (> $200^{\circ}C$). However, leakage current and weak polarization resulting from oxygen deficiency and crystalline defect should be resolved. Furthermore the magnetic ordering of pure BFO mainly prefers to have antiferromagnetic coupling. Up to now many attempts have been performed to improve the ferromagnetic and the ferroelectric properties of BFO by doping. In this work, we investigated the effects of Ni substitution on the multiferroism of bulk BFO. Four BFO samples (a pure BFO and three Ni-doped BFO's; $BiFe_{0.99}Ni_{0.01}O_3$, $BiFe_{0.98}Ni_{0.02}O_3$ and $BiFe_{0.97}Ni_{0.03}O_3$) were synthesized by the standard solid-state reaction and rapid sintering technique. The XRD results reveal that Ni atoms are substituted into Fe-sites and give rise to phase transition of cubic to rhombohedal. By using vibrating sample magnetometer and standard ferroelectric tester, the multiferroic properties at room temperature were characterized. We found that the magnetic moment of Ni-doped BFO turned out to be maximized for 3% of Ni dopant.