• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.899-903
• /
• 1994

Chitin was extracted from crab shell by Hackman method and chitosan was prepared to chitin, that was deacetylated under various concentration of NaOH solution and reaction time at constant temperature, $100^{\circ}C$. Samples were A=19%, B=52%, C=70% and D=93% deacetylation's chitosan and they were tested. When deacetylation was increased, $\overline{Mw}$ was decreased and removal rate of suspended solid and removal rate of chemical oxygen demand were increased. Suspended solid and removal rate of chemical oxygen demand showed the better at pH 9 and pH 7 than any other pH range.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.757-760
• /
• 2009

최근 들어 WGS 반응은 Pt과 같은 귀금속 촉매를 다양한 담체에 담지하여 낮은 온도에서 높은 활성을 지닌 촉매를 제조하기 위한 연구가 활발히 진행되고 있다. WGS 반응에서 귀금속 촉매가 높은 활성을 가지기 위해서 높은 산소저장능력(Oxygen Storage Capacity)과 산화환원능력(Redox)을 지닌 담체 개발이 필요하다. Ce-$ZrO_2$ 담체는 구조적으로 안정하며 높은 산소저장능을 가지고 있는 것으로 알려져 있다. Ce-$ZrO_2$ 구조는 Ce/Zr 비에 따라 다양한 변화가 생긴다. Ce/Zr 비가 6/4, 8/2인 경우 입방구조(Cubic)를 가지며 2/8인 경우 정방입계(Tetragonal)구조를 가진다. 이것은 담체 특성의 변화를 의미한다. 따라서, WGS 반응용 최적 담체를 선정하기 위해 Ce/Zr 비를 제조변수로 하여 담체특성을 분석하였다. 제조된 모든 담체는 공침법(Co-precipitation)을 사용하여 제조하였으며 $500^{\circ}C$에서 6시간 소성하였다. 담체 특성분석은 BET, XRD를 이용하였다. 추가적으로 제조변수를 다양화하여 담체 제조를 마쳤으며 특성분석이 진행 중이다. 분석 결과 $Ce_{0.2}Zr_{0.8}O_2$ 담체가 가장 넓은 표면적을 가지고 있으며 Ce/Zr 비가 높아질수록 표면적이 감소하는 경향을 나타내었다. Ce-$ZrO_2$ 담체의 나노결정크기는 Ce/Zr 비가 작아질수록 결정크기가 감소하는 경향을 나타내었으며 $Ce_{0.2}Zr_{0.8}O_2$가 Ce-$ZrO_2$ 담체 중에서 가장 작은 결정크기를 나타내어 3nm 이하의 나노-담체가 제조되었음을 확인하였다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.3
• /
• pp.245-252
• /
• 1993

To investigate a simple and rapid screening method for photosynthetic inhibitory herbicides, responses of tobacco(Nicotiana tabacum L.) and liverwort(Marchantia polymorpha L.) PA(photoautotrophic) cells to various commercial herbicides with different modes of action and leaf extracts of four weed species were compared. PET (photosynthetic electron transport) inhibitory type of herbicides has greater inhibitory effect in liverwort photoautotrophic cells than the photomixotrophic and heterotrophic cultured cells. Similary, PET inhibitory type of herbicides inhibited the oxygen evolution more in liverwort PA cells than the other type of herbicides. Based on oxygen evolution, 60% inhibition was observed by the 10% aqueous extracts of Polygonum hydropiper, while there was 100% inhibition by the 10% methanol extracts of Polygonum hydropiper. This assay gave well correlated results to the Hill reaction data using isolated thylakoids. Thus liverwort photoautotrophic cells might be suitable materials for rapid screening method for photosynthetic inhibitory herbicides.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.3
• /
• pp.291-299
• /
• 2018

Under a pyro-processing concept, an electrolytic reduction process has been developed to reduce uranium oxide in molten salt by electrochemical means as a part of spent fuel treatment process development. Accordingly, a model based on electrochemical theory is required to design a reactor for the electrolytic reduction process. In this study, a 1D model based on the phase-field theory, which explains phase separation behaviors was developed to simulate electrolytic reduction of uranium oxide. By adopting parameters for diffusion of oxygen elements in a pellet and electrochemical reaction rate at the surface of the pellet, the model described the behavior of inward reduction well and revealed that the current depends on the internal diffusion of the oxygen element. The model for the electrolytic reduction is expected to be used to determine the optimum conditions for large scale reactor design. It is also expected that the model will be applied to simulate the integration of pyro-processing.

• Journal of the Korean Chemical Society
• /
• v.25 no.5
• /
• pp.325-330
• /
• 1981

The electrochemical behavior of cadmium electrode for the nickel-cadmium battery system has been studied by cyclic voltammetry, controlled potential electrolysis and X-ray diffraction method. Cathodic polarization curve for cadmium hydroxide electrode prepared by electrochemical pretreatment of metallic cadmium showed two peaks. It has been found that cadmium hydroxide was reduced to cadmium metal at the first peak potential, whereas very activated metal of cadmium which was strongly oriented (002) rather than (101) was formed at the second peak potential. It was also found that the cadmium formed at the second peak potential reacted rapidly with oxygen. Therefore, it could be presumed that the cadmium recombination reaction with the oxygen was chemical, and could be represented as $2Cd + O_2 + 2H_2O\;{\longrightarrow}\;2Cd(OH)_2$.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.06a
• /
• pp.129-129
• /
• 2011

The limited understanding of the surface properties of $Pt_3Ni$ for the oxygen reduction reaction (ORR) in polymer electrolyte membrane fuel cell (PEMFC) has motivated the study of properties and electronic structures of seven layered $Pt_3Ni$ (001), (110), and (111) surfaces. The first principle method based on density functional theory (DFT) is carried out. It is found that the bulk $Pt_3Ni$ has a ferromagnetic ground state with the ordered fcc type L12 structure, which is in good agreement with other results. Non magnetic Pt has the induced magnetic moment due to the strong hybridization between 3d Ni and 5d Pt. The magnetic moment of Pt and Ni enhanced on the surface of each due to surface effect however the magnetic moment of surface Pt in the Pt-segregated Pt3Ni (111) decreased and the magnetic moment of Ni in Ni rich subsurface increased significantly. The calculated d band centers of Pt explain the possibilities for oxygen absorption and play the important roles in altering the catalytic properties. The spin polarized densities of states are presented in order to understand physical properties of Pt in different surfaces in detail.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.5
• /
• pp.432-438
• /
• 2009

In this paper, we synthesized LSG powder by Modified-GNP method. Lanthanum, strontium and gallium (LSG) were selected in the preparation of an oxygen-electrode (anode) for High Temperature Steam Electrolysis system (HTSE). The used amount and concentration of nitric acid were varied to find out an appropriate composition for oxygen-electrode (anode). In order to optimize the molar ratio of La and Sr, ratio of La to Sr was varied that 2:8, 5:5 and 8:2. The combined LSGs were calcined for 2 hours at $700^{\circ}C$ and were sintered in a furnace for 4 hours at $1200^{\circ}C$. The phase and crystallinity of LSG powder were determined by XRD. The surface morphology was observed through SEM photograph, and the specific surface area was investigated with BET. The thermochemical property was determined by TG/DTA. The synthesized preparation was obtained of $La_{0.8}Sr_{0.2}GaO_{3}$ formula for 3M nitric acid, which was the best perovskite phase.

• Carbon letters
• /
• v.12 no.4
• /
• pp.236-242
• /
• 2011

The oxyfluorination effects of activated carbon nanofibers (OFACFs) were investigated for $CO_2$ storage. Electrospun CFs were prepared from a polyacrylonitrile/N,N-dimethylformamide solution via electrospinning and heat treatment. The electrospun CFs were chemically activated in order to generate the pore structure, and then oxyfluorination was used to modify the surface. The samples were labeled CF (electrospun CF), ACF (activated CF), OFACF-1 ($O_2:F_2$ = 7:3), OFACF-2 ($O_2:F_2$ = 5:5) and OFACF-3 ($O_2:F_2$ = 3:7). The functional group of OFACFs was investigated using X-ray photoelectron spectroscopy analysis. The C-F bonds formed on surface of ACFs. The intensities of the C-O peaks increased after oxyfluorination and increased the oxygen content in the reaction gas. The specific surface area, pore volume and pore size of OFACFs were calculated by the Brunauer-Emmett-Teller and density functional theory equation. Through the $N_2$ adsorption isotherm, the specific surface area and pore volume slightly decreased as a result of oxyfluorination treatment. Nevertheless, the $CO_2$ adsorption efficiency of oxyfluorinated ACF improved around 16 wt% due to the semi-ionic interaction effect of surface modificated oxygen functional groups and $CO_2$ molecules.

• Journal of the Korean Ceramic Society
• /
• v.54 no.4
• /
• pp.323-330
• /
• 2017

To understand the defect chemistry of multiferroic $BiFeO_3-based$ systems, we synthesized nonstoichiometric $Bi_{1+x}FeO_{3{\pm}{\delta}}$ ceramics by conventional solid-state reaction method and studied their structural, dielectric and high-temperature charge transport properties. Incorporation of an excess amount of $Bi_2O_3$ lowered the Bi deficiency in $BiFeO_3$. Polarization versus electric field (P-E) hysteresis loop and dielectric properties were found to be improved by the $Bi_2O_3$ addition. To better understand the defect effects on the multiferroic properties, the high temperature equilibrium electrical conductivity was measured under various oxygen partial pressures ($pO_2{^{\prime}}s$). The charge transport behavior was also examined through thermopower measurement. It was found that the oxygen vacancies contribute to high ionic conduction, showing $pO_2$ independency, and the electronic carrier is electron (n-type) in air and Ar gas atmospheres.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.3
• /
• pp.383-388
• /
• 2006

SBR is one of the most general sewage/wastewater treatment processes and, particularly, has an advantage in high concentration wastewater treatment like sewage wastewater. A Kernel PCA based fault diagnosis system for biological reaction in full-scale wastewater treatment plant was proposed using only common bio-chemical sensors such as ORP(Oxidation-Reduction Potential) and DO(Dissolved Oxygen). During the SBR operation, the operation status could be divided into normal status and abnormal status such as controller malfunction, influent disturbance and instrumental trouble. For the classification and diagnosis of these statuses, a series of preprocessing, dimension reduction using PCA, LDA, K-PCA and feature reduction was performed. Also, the diagnosis result using differential data was superior to that of raw data, and the fusion data show better results than other data. Also, the results of combination of K-PCA and LDA were better than those of LDA or (PCA+LDA). Finally, the fault recognition rate in case of using only ORP or DO was around maximum 97.03% and the fusion method showed better result of maximum 98.02%.