• Bulletin of the Korean Chemical Society
• /
• v.9 no.6
• /
• pp.376-378
• /
• 1988

Results of kinetic studies on the reactions of benzyl chlorides with anilines and benzylamines are reported. Analyses of the cross interaction constants relevant to the degree of bond formation, ${\rho}_{XY}$ and ${\lambda}_{XY}$, are carried out. The magnitudes of the two parameters indicated that the degree of bond formation in the transition state is the typical of that expected for an $S_N2$ reaction, but the reactions with benzylamines appear to have a slightly less degree of bond formation compared with the reactions with anilines.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.3
• /
• pp.186-190
• /
• 1986

Effects of substituents in the nucleophile(X), the substrate(Y) and the leaving group(Z) on the structure of $S_N2$ transition states have been analyzed by considering effects of four components, electrostatic($E_{es}$), exchange repulsion ($E_{ex}$), polarization($E)_{pl}$) and charge transfer($E_{ct}$) terms, of interaction between the reactants on the degree of bond making and bond breaking. Prediction of net effects of all substituents(X, Y and Z) on the degree of bond making were found to be clearcut whereas the effect of an electron withdrawing group on the substrate (Y = EWG) on the degree of bond breaking was complex; the substituent(Y = EWG) is normally carbon-leaving group($C^{\ast}$-L) bond tightening($E_{pl}$ dominance) but becomes $C^{\ast}$-L bond loosening when the bond is strongly antibonding ($E_{ct}$ dominance). Our model calculations on the reaction of $CH_2XNH_2$ with $YCH_2COOCH_2Z$ using energy decomposition scheme have confirmed that predictions based on our analysis are correct.

• Macromolecular Research
• /
• v.17 no.5
• /
• pp.289-295
• /
• 2009

Low viscosity aromatic hyperbranched polyester epoxy resin (HTBE) was synthesized by the reaction between epichlorohydrin (ECH) and carboxyl-end hyperbranched polyester (HTB) which was prepared from inexpensive materials $A_2$ (1,4-butanediol glycol, BEG) and $B_3$ (trimellitic anhydride, TMA) by pseudo one-step method. The molar mass of the HTB was calculated from its acid value by "Recursive Probability Approach". The degree of branching (DB) of the HTB was characterized by model compounds and $^1H$ NMR-minus spectrum technology, and the DB of the HTB was about $0.47{\sim}0.63$. The viscosity and epoxy equivalent weight of the HTBE were $3,600{\sim}5,000\;cp$ and lower than 540 g/mol respectively. The reaction mechanism and structure of the $AB_2$ monomer, HTB and HTBE were investigated by MS, $^1H$ NMR and FTIR spectra technology. The molecular size of HTBE is under 8.65 nm and its shape is ellipsoid-like as determined by molecular simulation.

• Journal of Pharmacopuncture
• /
• v.2 no.1 s.2
• /
• pp.1-11
• /
• 1999

We have studied Bee Venom Therapy to treat Sequalae of Sprain, and obtained following results. 1. The treatment of sprain is using the effect of the affected part on Bee Venom Therapy. 2. For the treatment of sprain, it is often used the near acupuncture point of injury(近位取穴) or painful point to press(阿是穴). 3. Bee Venom Therapy is one of the powerful treatment, so we are using the sequalae of sprain in the case of not cured by Acupuncture, Cupping or another therapy. 4. Bee Venom injection is started a small quantity, and is increased slowly by degrees. 5. The immune response by Bee Venom Therapy is a sort of Allergy, and it is classified large delayed reaction. It is considered positive reaction. 6. We have selected Acupuncture Points from one to four by the degree of injury. 7. The period of treatment is some different from the degree of injury, but generally we have obtained good results to treat from 5 to 20 by Bee Venom Therapy.

• Preventive Nutrition and Food Science
• /
• v.8 no.3
• /
• pp.230-234
• /
• 2003

Mass transfer characteristics during osmotic dehydration of carrots were studied as functions of immersion temperature and time, and sugar and salt concentrations. The effect of osmotic dehydration on the degree of browning of air-dried carrots was also evaluated. Increasing the immersion temperature and time, sugar concentration, and salt addition increased water loss, sugar gain, molality and rate of dehydration. The water loss and increases in solids, and molality were rapid in the beginning of the process and then increased slowly during remainder of the process. Increasing 1 or 2% salt concentration in the 40$^{\circ}$Brix sugar solution at 6$0^{\circ}C$ increased water loss and solid gain. Salt addition was not able to significantly affected on water loss and solid gain compare to temperature (40～8$0^{\circ}C$) and sugar concentration (20～60$^{\circ}$Brix) changes due to the low salt concentration. A minimum degree of browning of the air-dried carrots (O.D. = 0.048) could be achieved using binary solutions (40$^{\circ}$Brix sugar solution with 2% salt addition) with 24 min of immersion time compared to control (O.D. = 1.308) or blanching with 24 min of immersion time (O.D. = 0.174).

• Journal of Microbiology and Biotechnology
• /
• v.8 no.6
• /
• pp.568-574
• /
• 1998

Two types of chitosanases produced from Aspergillus fumigatus KH-94 were purified by ion exchange and gel permeation chromatography. Molecular weights of the enzymes are 22.5 kDa (chitosanase I) and 108 kDa (chitosanase II). pI, optimum pH, and temperature of chitosanase I are 7.3, 5.5, and 70-$80^{\circ}C$, respectively, and those of chitosanase II are 4.8, 4.5~5.5, and 50~$60^{\circ}C$, respectively. Activities of both chitosanases were increased by $Mn^{2+}$ but inhibited by $Cu^{2+}$ and $Hg^{2+}$ . Chitosanase I has endo-splitting activity that hydrolyzes chitopentaose, chitohexaose, and chitosan to chitobiose, chitotriose, and chitotetraose, whereas chitosanase II has exo-splitting activity that hydrolyzes chitobiose and chitosan to glucosamine. Chitosanase II was found to have transglycosylation activity also in the reaction of 2% more chitooligosaccharides as a substrate and at the initial reaction. The higher degree of deacetylation, the stronger activities of chitosanase Iand II toward chitosans. Both chitosanases could hydrolyze chitosan and glycol chitosan but not chitin, cellulose, and carboxymethyl cellulose. To produce higher degree of polymerization of chitooligosaccharides, chitosanase I was used and yielded 80% of recovery.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.6
• /
• pp.669-674
• /
• 2017

In this study, the novel electrochemical and colorimetric analysis methods are suggested to estimate the degree of phosphoric acid ion poisoning on Pt based catalyst surface and to confirm the possibility of replacing the expensive and long time consumed conventional methods. As the ways, the electrochemical half cell tests such as cyclic voltammetry (CV) and linear sweep voltammetry (LSV) are used and the change in chemical behavior by absorption of the phosphoric acid ion on Pt based catalyst surface and hydrogen peroxide decomposition reaction are successfully recognized by colorimetric measurements. Conclusively, it is proved that the new methods show superior sensitivity for identifying the degree of phosphoric acid poisoned on Pt based catalyst.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2013.12a
• /
• pp.95-95
• /
• 2013

The NdFeB magnet can be classified into the sintered magnet and bonded magnet. The former has superior magnet characteristics but the degree of freedom in shape is highly restricted, whereas the latter has a high degree of freedom, but its magnet characteristics are inferior to the former. When a NdFeB magnet is used at the elevated temperature, part of Nd must be replaced with a high priced Dy to increase its coercive force. For these reasons, a Dy free and high performance NdFeB bonded magnet is desired strongly. The author successfully developed a Dy free NdFeB anisotropic bonded magnet based on discovery of new phenomena called as d-HDDR reaction and its mass production process such as a thermally balanced hydrogen reaction furnace, micro capsuled powder, compression molding / injection molding under magnetic field, magnetic die and so on. Applied to DC brush seat motor for automotive use, the motor has become 50% small in size and weight. The commercialization of a half sized motor for automotive use has been realized up to the market share of 30%. At present, its commercialization is extending to various types of motors such as power tool, ABS motor, wiper motor, window motor, electric bike power motor, and compressor motor. It is expected that the applications will be increasingly enlarged to EV motor, wind generator, EPS motor, washing machine, and glass cutting machine. This innovative technology has realized Dy free high performance magnet and mudt make big contribution to not only rare element strategies but also energy conservation.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.153-154
• /
• 2018

As the air pollution progresses, the pollution degree of the indoor air quality is increased, and when the pollution degree of the indoor air quality is increased, it causes respiratory diseases and skin diseases. In addition, volatile organic compounds are released from the materials used for architectural interior decoration, and volatile organic compounds are the main cause of polluting indoor air quality. In order to improve indoor air quality, we tried to secure indoor air quality pollution by using photocatalyst which has the function of decomposing harmful substances. photocatalyst is a material that promotes chemical reaction by absorbing light. The photocatalyst used in the experiment was TiO₂, In this study, an adsorption type hardener for reducing volatile organic compounds was prepared by photocatalytic reaction. the formaldehyde and CO₂ concentrations of the cured products were analyzed according to the TiO₂ content.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.8
• /
• pp.574-581
• /
• 2008

The characteristics of combustion and flow for a lean premixed flame in lab-scale gas turbine combustor was studied through experiment and numerical analysis. From the experiment, flame structure and heat release rate were obtained from OH emission spectroscopy. Qualitative comparisons were made line-integrated OH chemiluminescence image and abel-transformed one. NOx analyzer was implemented to get the characteristic of NOx exhaust from the combustor. From the numerical analysis, the thermal distribution and characteristic of recirculation zone with the change of fuel-air mixing degree, the characteristic of methane distribution with equivalence ratio in the combustor respectively. Total heat release rate is increased with increasing equivalence ratio. Thermal Nox is reduced with increasing fuel-air mixing degree. Increasing equivalence ratio results in the decrease of the size of reaction zone and alteration of the position of the reaction zone into the entrance of the combustor.