• Structural Engineering and Mechanics
• /
• v.3 no.5
• /
• pp.429-443
• /
• 1995

The deformational response of plastic board drains installed to accelerate consolidation of soft soils, is examined as a problem of downdrag. The drain is modelled as a beam-column in which the axial load increases nonlinearly with depth. The soil response is represented by the Winkler medium whose coefficient of subgrade modulus increases linearly with depth. The governing equations for the drain-soil system are derived and solved as an eigenvalue problem. The critical buckling loads and the shape of the drain are obtained as functions of the normalized subgrade modulus of the soil at the top, the parameters signifying the variation of axial load along the length of the drain and the increase of subgrade modulus with depth. The derived deformed shapes of the drain are consistent with the observed ones.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.182-183
• /
• 2019

In this study, the optimization of mixing proportion of press-forming board with blast furnace slag, pearlite and bottom ash was investigated using the response surface methodology. Ten Mixing proportions of specimens were designed by the response surface design, and then flexural failure load, moisture content and water absorption of specimens were measured. As a result of the reaction surface analysis based on the experimental results, it was possible to derive the optimal mixing proportion with the satisfaction of 93%.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.4
• /
• pp.140-145
• /
• 2015

An on-board reaction wheel is payload of small satellite for space environment test. The reaction wheel is designed for considering physical, electrical, and environmental requirements. In this paper, we report design, manufacturing process and operation performance verification. Furthermore, the specifications of environmental test are performed under environmental conditions for guarantee of stability and reliability. The operation and environment test results are presented to meet the requirements at the reaction wheel flight model.

• Physical Therapy Rehabilitation Science
• /
• v.7 no.4
• /
• pp.179-185
• /
• 2018

Objective: The purpose of this study was to analyze and compare vertical ground reaction forces during sit to stand (STS) and gait between female elderly and young individuals using the Wii Balance Board (WBB). Design: Cross-sectional study. Methods: Fifty-one female elderly people (age: $75.18{\pm}4.60years$), and 13 young people (age: $29.85{\pm}3.69years$) performed the five times STS test and gait respectively on the WBB. We analyzed time (s), vertical peak (%), integral summation (Int_SUM, %), and counter variables (%) in STS and 1st peak (body weight, BW%), 2nd peak (BW%), peak minimum (BW%), time (second), center of pressure (COP) path length (mm), and Int_SUM (BW%) in gait. The independent t-test was used to assess for differences in STS, gait ability, and general characteristics between the female elderly group and young adults group. With the first and last trials excluded, the mean value was obtained from the middle three of the five trials. Results: During STS, Int_SUM and time of young adults were significantly less than of the female elderly subjects. There were no significant differences in peak and counter variables. In gait, all variables (1st peak, 2nd peak, min, time, COP_path, and Int_SUM) showed significant differences between groups (p<0.05). This study demonstrated that the validity of vertical ground reaction forces occurring during STS and gait was significant in female elderly and young adults. Conclusions: Based on the measurement of vertical ground reaction forces in STS and gait using the WBB, it is possible to clinically improve the quality of geriatric physical therapy. Further studies are necessary to examine concurrent validity of elderly patients who have undergone total hip or knee replacement.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.47 no.1
• /
• pp.1-11
• /
• 2023

The Indian golden muga silkworm, Antheraea assamensis Helfer is an economically important wild silkworm endemic to Northeastern part of India. In recent years, climate change has posed a threat to muga silk production due to the requirement that larvae be reared outdoors. Since the muga silkworm larvae are exposed to the vagaries of nature, the changing climate has increased the incidence of microbial diseases in the rearing fields. Accurate diagnosis of the disease causing pathogens and its associated epidemiology are prerequisites to manage the diseases in the rearing field. Although conventional microbial culturing methods are widely used to identify pathogenic bacteria, they would not provide meaningful information on a wide variety of silkworm pathogens. The information on use of molecular diagnostic tools in detection of microbial pathogens of wild silk moths is very limited. A wide range of molecular and immunodiagnostic techniques including denaturing gradient gel electrophoresis (DGGE), random amplified polymorphism (RAPD), 16S rRNA/ITSA gene sequencing, multiplex polymerase chain reaction (M-PCR), fluorescence in situ hybridization (FISH), immunofluorescence, and repetitive-element PCR (Rep-PCR), have been used for detecting and characterizing the pathogens of insects with economic significance. Nevertheless, the application of these molecular tools for detecting and typing entomopathogens in surveillance studies of muga silkworm rearing is very limited. Here, we discuss the possible application of these molecular techniques, their advantages and major limitations. These methods show promise in better management of diseases in muga ecosystem.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.4
• /
• pp.135-145
• /
• 2006

The aim of this study was to find out the differences of biomechanical factors from touching down the vaulting board to landing when techniques of 1/1Turn, stretched, and Tucked were performed on the old vaulting horse and on the new vaulting table. Three national representative men gymnasts were sampled for this study. Three dimension motion analyses by means of six Sony PD-150 video cameras with the velocity of 60 fps were used. As a result of analyzing the kinetic data from two kind of vaulting table, the following conclusions were made. 1. There was not significant differences of angular momentum between the old and the new vaulting table in all three techniques except the phase of stepping on the vaulting board and contacting the vaulting horse in the Tucked technique. IN the two phases above, the angular momentum in the new vaulting table was greater than that of the old vaulting horse. 2. There were few significant differences between the old and the new vaulting horses in the horizontal and vertical reaction force according to techniques when stepping was performed. However, it appeared tendency that the horizontal and vertical reaction force in the new vaulting table was a little greater than that of the old vaulting horse when the 1/1Turn, the Stretched and the Tucked were performed.

• Resources Recycling
• /
• v.10 no.6
• /
• pp.15-21
• /
• 2001

Shape-controlled copper oxides have been recovered from copper-containing waste etchant by neutralization with alkalihydroxide. Large amount of copper-containing waste etchant is generated from Printed Circuit Board industry. In an environmental and economic point of view, retrieve of the valuable natural resource from the waste is important. In recycling process of copper oxide from the waste etchant, reaction temperature controls shapes and sizes of the products. Copper oxide recovered below reaction temperature $40^{\circ}C$ was of a needle shape, while copper oxide comes in a platy shape above $40 ^{\circ}C$ . Physical properties of samples have been characterized using SEM, XRD, TGA and Atomic absorption spectroscopy.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.169-171
• /
• 2006

Solderability and reaction properties were investigated for four Pb-free alloys as a function of Ag contents; Sn-4.0Ag-0.5Cu, Sn-3.0Ag-0.5Cu, Sn-2.5Ag-0.5Cu, and Sn-1.0Ag-0.5Cu. The alloy of the lowest Ag content, i.e., Sn-1.0Ag-0.5Cu, showed poor wetting properties as the reaction temperature decreased to 230oC. Variation of Ag concentration in the Sn-xAg-0.5Cu alloy shifted exothermic peaks indicating the undercooling temperature in DSC curve. For the aging process at 170oC, the thickness of IMCs at the board-side solder/Cu interface increased with the Ag concentration.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.4
• /
• pp.391-397
• /
• 2016

Vibration disturbances induced by the reaction wheels can severely degrade the performance of high precision payloads on board satellites with high pointing stability requirements. The unwanted disturbances produced by the reaction wheels are composed of fundamental harmonic disturbances due to the flywheel imbalance and sub/higher harmonic disturbances due to bearing irregularities, motor imperfections and so on. Because the wheel speed is constantly changed during the operation of a reaction wheel, the vibration disturbance induced by the reaction wheels can magnify the satellite vibration when the rotating frequency of wheel meets the natural frequency of satellite structure. In order to provide an effective isolation of the reaction wheel disturbances, isolation performance of a hybrid vibration isolator is investigated. In this paper, hybrid vibration isolator that combines passive and active components is developed and its hybrid isolation performance using notch filter control is evaluated in single-axis. The hybrid isolation performance using notch filter control show additional performance improvement compared to the results using only passive components.

• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.409-412
• /
• 2010

This study investigated and discussed the drying characteristics of municipal wood wastes (wood, particle board, medium density fiber-board(MDF)) in the $N_2$ environment with an isothermal thermogravimetric analyzer. The drying rate could be expressed by a first order reaction model on remaining fraction of moisture. The activation energy ranged from 12.72 kJ/g mol to 18.31 kJ/g mol and the frequency factor from 0.2155 1/s to 1.249 1/s.