• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.3
• /
• pp.373-382
• /
• 2020

This study proposes a method of separating uranium (U) and minor actinides from rare earth (RE) elements in the LiCl-KCl salt system. Several RE metals were used to reduce UCl₃ and MgCl₂ from the eutectic LiCl-KCl salt systems. Five experiments were performed on drawdown U and plutonium (Pu) surrogate elements from RECl₃-enriched LiCl-KCl salt systems at 773 K. Via the introduction of RE metals into the salt system, it was observed that the UCl₃ concentration can be lowered below 100 ppm. In addition, UCl₃ was reduced into a powdery form that easily settled at the bottom and was successfully collected by a salt distillation operation. When the RE metals come into contact with a metallic structure, a galvanic interaction occurs dominantly, seemingly accelerating the U recovery reaction. These results elucidate the development of an effective and simple process that selectively removes actinides from electrorefining salt, thus contributing to the minimization of the influx of actinides into the nuclear fuel waste stream.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.9
• /
• pp.4271-4294
• /
• 2018

Communication cost is the most important factor in Wireless Sensor Networks (WSNs), as exchanging control keying messages consumes a large amount of energy from the constituent sensor nodes. Time-based Dynamic Keying and En-Route Filtering (TICK) can reduce the communication costs by utilizing local time values of the en-route nodes to generate one-time dynamic keys that are used to encrypt reports in a manner that further avoids the regular keying or re-keying of messages. Although TICK is more energy efficient, it employs no re-encryption operation strategy that cannot determine whether a healthy report might be considered as malicious if the clock drift between the source node and the forwarding node is too large. Secure SOurce-BAsed Loose Synchronization (SOBAS) employs a selective encryption en-route in which fixed nodes are selected to re-encrypt the data. Therefore, the selection of encryption nodes is non-adaptive, and the dynamic network conditions (i.e., The residual energy of en-route nodes, hop count, and false positive rate) are also not focused in SOBAS. We propose an energy efficient selection of re-encryption nodes based on fuzzy logic. Simulation results indicate that the proposed method achieves better energy conservation at the en-route nodes along the path when compared to TICK and SOBAS.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.242-242
• /
• 2002

Two MIMAS MaX fuel rods base-irradiated in a commercial PWR have been reinstrumented and irradiated at a test reactor. The fabrication data for two MOX roda are characterized together with base irradiation information. Both Rods were reinstrumented to be fitted with thermocouple to measure centerline temperature of fuel. One rod was equipped with pressure transducer for rod internal pressure whereas the other with cladding elongation detector. The post irradiation examinations for various items were performed to determine fuel and cladding in-pile behavior after base irradiation. By using well characterized fabrication and re-instrumentation data and power history, the fuel performance code, COSMOS, is verified with measured in-pile and PIE information. The COMaS code shows good agreement for the cladding oxidation and creep, and fission gas release when compared with PIE dad a after base irradiaton. Based on the re-instrumention information and power history measured in-pile, the COSMOS predicts re-instrumented in-pile thermal behaviour during power up-ramp and steady operation with acceptable accuracy. The rod internal pressure is also well simulated by COSMOS code. Therfore, with all the other verification by COSMOS code up to now, it can be concluded that COSMOS fuel performance code is applicable for the design and license for MaX fuel rods up to high burnup.

• Journal of Korean Society of Water and Wastewater
• /
• v.17 no.4
• /
• pp.519-527
• /
• 2003

Cake layer in crossflow microfiltration(CFMF) can be reduced by coagulation, enhancing membrane flux. This is because enlarging particle size by coagulation increases shear-induced diffusivity and the back-transport of rejected particles. However it is known that the enlarged particles are disaggregated by the shear force of the pump while passing through it. This study is to look at the disaggregation in relation with cake layer reducation. Kaolin and polysulfon hollow fiber microfilter are used for experiment. The reduction of cake resistance by coagulation is observed in a range of 17% to 53% at the various coagulation conditions. The particle size analysis results of the experiments show that aggregated particles in feed are completely disaggregated by pump but re-aggregation of particles occurs in membrane. This suggestes that the re-aggregation of particles is critical to cake reduction and flux enhancement, since the aggregated particles are completely broken. The mechanisms for re-aggregation in membrane are the same with those for coagulation in feed tank. Charge neutralization is better for CCFMF than sweep flocculation although it has two drawbacks in operation.

• Journal of Korean Academic Society of Home Health Care Nursing
• /
• v.18 no.1
• /
• pp.13-19
• /
• 2011

Purpose: The aim of this study was to evaluate patient satisfaction and indirect marketing effects (recommendation, hospital re-visit intention) and additionally to calculate the expected incomes by clinical nurse specialists (CNS). Methods: Sixty-six patients who had lower varicose vein removal surgery performed at two general hospitals from August 1 to November 30, 2008, were recruited. The effects were evaluated by degree of patient satisfaction, the number of personal recommendations given, rate of hospital re-visit intention, and indirect marketing effects. Indirect marketing effects were calculated as the total cost of surgery multiplied by the score of other variables. Results: The patient satisfaction score was 0.82 for CNS and 0.43 for general nurses (GN). The number of personal recommendations given was 2.5 for CNS and 1.1 for GN. The rate of hospital re-visit intention was 0.31 for CNS and 0.21 fot GN. The ratio of expected incomes between CNS and GN is 2.07 to 1. Conclusion: We found that when a CNS serves a patient, satisfaction, number of personal recommendations, hospital re-visit intention, and indirect marketing effects were higher than those of GN. These results show that CNS have dominant roles and functions and that the effects of CNS employment can be measured using economics parameters.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.5
• /
• pp.1847-1870
• /
• 2021

With the development of information and communication technologies, especially wireless networks and cell phones, the e-voting system becomes popular as its cost-effectiveness, swiftness, scalability, and ecological sustainability. However, the current e-voting schemes are faced with the problem of privacy leakage and further cause worse vote-buying and voter-coercion problems. Moreover, in large-scale voting, some previous e-voting system encryption scheme with pairing operation also brings huge overhead pressure to the voting system. Thus, it is a vital problem to design a protocol that can protect voter privacy and simultaneously has high efficiency to guarantee the effective implementation of e-voting. To address these problems, our paper proposes an efficient unidirectional proxy re-encryption scheme that provides the re-encryption of vote content and the verification of users' identity. This function can be exactly applied in the e-voting system to protect the content of vote and preserve the privacy of the voter. Our proposal is proven to be CCA secure and collusion resistant. The detailed analysis also shows that our scheme achieves higher efficiency in computation cost and ciphertext size than the schemes in related fields.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.3
• /
• pp.347-353
• /
• 2019

The composition of the reduced fuel produced in the electrolytic reduction process of pyroprocessing affects the concentration change of $UCl_3$, an important operating variable of the electrorefining process. In this study, we examined the concentration change of $UCl_3$ in the electrorefiner according to the content of TRU and RE elements in the reduced fuel and the concentration of $Li_2O$ introduced in the electrorefiner accompanied with the reduced fuel. Considering only the TRU and RE elements, the concentration of $UCl_3$ decreased with increasing the number of electrorefining operation batch. In order to operate one campaign (20 batches) of electrorefining process, it was found that additional injection of $UCl_3$ should be conducted more than 3 times. On the other hand, the concentration of $UCl_3$ in the electrorefiner changed significantly depending on the concentration of $Li_2O$ and, accordingly the number of operable electrorefining batches decreased rapidly, showing that the concentration of $Li_2O$ is an important operating variable in electrorefining. Therefore, the results of this study show that to maintain the concentration of $UCl_3$ in the electrorefiner, the operation mode should be set by taking into account the effect of $Li_2O$ as well as the TRU and RE elements contained in the reduced fuel.

• IE interfaces
• /
• v.17 no.2
• /
• pp.233-241
• /
• 2004

The main subject to become a hub port is automation. The automated container terminal has already operated in advanced ports and it has been planned for the basic planning and operation design in domestic case. The key of automated container terminal is effective operation of both ATC(automated transfer crane) and AGV(automated guided vehicle) which is automated handling equipments. This is essential to productivity of automated container terminal. This study suggests the most optimal method of equipment operation in order to minimize loading time using each three types of effective ATC operation methods and AGV dispatching rules in automated container terminals. As the automated equipment operation causes unexpected deadlocks or interferences, it should be proceeded on event-based real time. Therefore we propose the most effective ATC operation methods and AGV dispatching rules in this paper. The various states occurred in real automated container terminals are simulated to evaluate these methods. This experiment will show the most robust automated equipment operation method on various parameters(the degree of yard re-marshaling, the number of containers and AGV)

• Journal of Chest Surgery
• /
• v.13 no.2
• /
• pp.130-133
• /
• 1980

Since the first report of an operation for prolapsed intervertebral disk by Mixter and Barr[1934], many thousands of operations have been successfully performed without incident. Linton and White in 1945 reported the vascular complication, but perforation of large vessels is rare complication of operation for prolapsed disk. A medical student, aged 22 years, was performed to a disk operation [L4-5, Rt. on May 1977.] From postoperative 10th day, palpitation, generalized edema and substernal pain were noted, and 2 months later, wide pulse pressure [70-80 mmHg], continuous bruit and thrill on the Rt. low abdomen were followed. Aortography revealed arteriovenous fistula between just proximal to abdominal aortic bifurcation and inferior vena cava. So, fistulectomy [Resection of proximal 2 cm of C.I.A., Rt, including fistula opening and end to end anastomosis] was performed on July, 77. During follow up study, remained fistula between Rt. internal lilac artery and lilac vein was found 2 months later. Re-operation [Double ligation of the Rt. internal lilac artery] was don on January 1978. Postop. results were excellent, except impossible to ejaculation.

• Journal of Korean Neurosurgical Society
• /
• v.58 no.6
• /
• pp.539-546
• /
• 2015

Objective : To report the learning curve of percutaneous endoscopic lumbar discectomy (PELD) for a surgeon who had not been previously exposed to this procedure based on the period and detailed technique with a retrospective matched comparative design. Methods : Of 213 patients with lumbar disc herniation encountered during the reference period, 35 patients who were followed up for 1 year after PELD were enrolled in this study. The patients were categorized by the period and technique of operation : group A, the first 15 cases, who underwent by the 'in-and-out' technique; group B, the next 20 cases, who underwent by the 'in-and-out-and-in' technique. The operation time, failure rate, blood loss, complication rate, re-herniation rate, the Visual Analogue Scale (VAS) for back and leg were checked. The alteration of dural sac cross-sectional area (DSCSA) between the preoperative and the postoperative MRI was checked. Results : Operative time was rapidly reduced in the early phase, and then tapered to a steady state for the 35 cases receiving the PELD. After surgery, VAS scores for the back and leg were decreased significantly in both groups. Complications occurred in 2 patients in group A and 2 patients in group B. Between the two groups, there were significant differences in operative time, improvement of leg VAS, and expansion of DSCSA. Conclusion : PELD learning curve seems to be acceptable with sufficient preparation. However, because of their high tendency to delayed operation time, operation failure, and re-herniation, caution should be exercised at the early phase of the procedure.