• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3320-3325
• /
• 2023

The scaled water-cooled Reactor Cavity Cooling System (RCCS) experimental facility reproduces a passive safety feature to be implemented in Generation IV nuclear reactors. It keeps the reactor cavity and other internal structures in operational conditions by removing heat leakage from the reactor pressure vessel. The present work uses Flownex one-dimensional thermal-fluid code to model the facility and predict the experimental thermal-hydraulic behavior. Two representative steady-state cases defined by the bulk volumetric flow rate are simulated (Re = 2,409 and Re = 11,524). Results of the cavity outlet temperature, risers' temperature profile, and volumetric flow split in the cooling panel are also compared with the experimental data and RELAP system code simulations. The comparisons are in reasonable agreement with the previous studies, demonstrating the ability of Flownex to simulate the RCCS behavior. It is found that the low Re case of 2,409, temperature and flow split are evenly distributed across the risers. On the contrary, there's an asymmetry trend in both temperature and flow split distributions for the high Re case of 11,524.

• 시스템엔지니어링학술지
• /
• 제13권1호
• /
• pp.15-23
• /
• 2017

This paper describes verification of APR1400 reactor vessel by applying the system engineering approach, in which the design re-engineering method is used to check the design parameters of APR1400 RV (reactor vessel). The RV is classified as safety class 1 and therefore must adhere strictly to the rules of ASME BPVC section III, subsection NB and seismic category I. This study explores designing the RV by following the ASME guidelines and making a comparative study with the current design. To meet this objective we apply system engineering methodologies to structure the process and allow for verification and validation of the major RV design parameters such as thickness of RV. The structural thicknesses of various part of RV are determined as well as reinforcements on the RV major nozzles. A 3D virtual reality model was created based on the design parameters using CATIA V5 and animation using Dassault Composer V2016. A comparison of re-engineered ARP1400 RV and standard APR1400 RV was done to show which design parameters were taken more conservative approach.

• 한국기계가공학회지
• /
• 제18권11호
• /
• pp.109-114
• /
• 2019

Hydraulic pumps are widely used in fields such as machinery manufacturing, engineering and construction. Although the research on hydraulic engineering is mature, it is still necessary to examine various performance aspects in detail for specific applications. This paper will focus on the hydraulic pump used in special construction machinery that needs high temperature and high pressure resistance. It will analyze the theoretical design, structure and thermal characteristics of the pump system using the Fundamentals of Engineering (FE) method, and will measure the key tolerance parameters of the hydraulic pump to ensure the accuracy of the machining. Through this research, a good design method for the linear reciprocating type of hydraulic pump can be summarized.

• Wind and Structures
• /
• 제30권5호
• /
• pp.475-483
• /
• 2020

This work investigates Reynolds number Re (= 50 - 200) effects on the flows around a single cylinder and the two tandem (center-to-center spacing L^⁎= L/D = 4) cylinders, each of a diameter D. Vorticity structures, Strouhal numbers, and time-mean and fluctuating forces are presented and discussed. For the single cylinder, with increasing Re in the range examined, the vorticity magnitude, Strouhal number and fluctuating lift all monotonically rise but time-mean drag, vortex formation length, and lateral distance between the two rows of vortices all shrink. For the two tandem cylinders, the increase in Re leads to the formation of three distinct flows, namely reattachment flow (50 ≤ Re ≤ 75), transition flow (75 < Re < 100), and coshedding flow (100 ≤ Re ≤ 200). The reattachment flow at Re = 50 is steady. When Re is increased from 75 to 200, the Strouhal number of the two cylinders, jumping from 0.113 to 0.15 in the transition flow regime, swells to 0.188. The two-cylinder flow is more sensitive to Re than the single cylinder flow. Fluctuating lift is greater for the downstream cylinder than the upstream cylinder while time-mean drag is higher for the upstream cylinder than for the other. The time-mean drags of the upstream cylinder and single cylinder behaves similar to each other, both declining with increasing Re.

• 한국분말재료학회지
• /
• 제25권3호
• /
• pp.213-219
• /
• 2018

We report a method for preparing rare earth oxides ($Re_xO_y$) from the recycling process for spent Ni-metal hydride (Ni-MH) batteries. This process first involves a leaching of spent Ni-MH powders with sulfuric acid at $90^{\circ}C$, resulting in rare earth precipitates (i.e., $NaRE(SO_4)_2{\cdot}H_2O$, RE = La, Ce, Nd), which are converted into rare earth oxides via two different approaches: i) simple heat treatment in air, and ii) metathesis reaction with NaOH at $70^{\circ}C$. Not only the morphological features but also the crystallographic structures of all products are systematically investigated using field-emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD); their thermal behaviors are also analyzed. In particular, XRD results show that some of the rare earth precipitates are converted into oxide form (such as $La_2O_3$, $Ce_2O_3$, and $Nd_2O_3$) with heat treatment at $1200^{\circ}C$; however, secondary peaks are also observed. On the other hand, rare earth oxides, RExOy can be successfully obtained after metathesis of rare earth precipitates, followed by heat treatment at $1000^{\circ}C$ in air, along with a change of crystallographic structures, i.e., $NaRE(SO_4)_2{\cdot}H_2O{\rightarrow}RE(OH)_3{\rightarrow}RE_xO_y$.

• 정보처리학회논문지D
• /
• 제10D권5호
• /
• pp.845-858
• /
• 2003

1980년대 이후, 소프트웨어 위기에 대응하기 위한 다양한 소프트웨어 공학적 기법들이 출현하기 시작 하였고, 현재 소프트웨어의 질적 항상 및 생산성 향상을 꾀하기 위한 개발 지침으로 소프트웨어 개발 프로세스를 적용하는데 관심이 집중되어지고 있다. 그러나 대부분의 방법론들이 앞으로 구축한 새로운 시스템의 재사용성 확보에 치중할 뿐, 기존의 레거시 시스템 자원을 재사용하여 새로운 시스템을 구축하는 재공학 방법은 지원하지 못하고 있는 실정이다. 본 논문에서는 레거시 시스템의 효율적 진화를 위한 재공학 프로세스(Reengineering Process)로 RUP를 확장, 커스터마이징하여 구성한 RUP+re을 제시한다. RUP+re는 Small-h 모델을 바탕으로 크게 역공학 워크플로우(Reverse Engineering Workflow), 변환 워크플로우(Transformation Workflow), 진화 워크플로우(Evolution Workflow)로 구성되어진다. RUP+re의 각 워크플로우와 세부스텝을 제공하고 재공학 사례 연구론 통하여 실질적으로 프로세스를 검증함으로서 레거시 시스템 자원의 진화론 위한 소프트웨어 재공학 프로세스 구축에 효율적인 지침을 제공한다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2010년도 춘계학술대회
• /
• pp.253-258
• /
• 2010

The paper reviews the methodologies of confirmatory data analysis(CDA) and exploratory data analysis(EDA) in statistical quality control(SQC), design of experiment(DOE) and reliability engineering(RE). The study discusses the properties of flexibility, openness, resistance and reexpression for EDA.

• Bulletin of the Korean Chemical Society
• /
• 제30권12호
• /
• pp.3016-3020
• /
• 2009

The chemical bond parameters of Y-123, Eu-123, Pr-123 and Gd-123 compounds have calculated using the chemical bond theory of complex crystals. Their hardness have been predicted by the chemical bond definition of hardness. The calculated results indicate that the Ba-O and RE-O types of bond have a lower covalent character and the Cu-O types of bond have greater covalency. The hardness values increase as the unit cell volume of the rare earth superconductor structures decrease.

• 적정기술학회지
• /
• 제6권2호
• /
• pp.94-102
• /
• 2020

신재생에너지는 개발도상국의 농촌 지역의 지속가능한 개발을 위한 필수 요소이다. 나아가, 독립형 신재생에너지 발전 시스템을 의료 분야에 응용하여 삶의 질을 증진시킬 수 있다. 본 연구에서는 개발도상국에서 백신을 안전하게 보관하고 보급하여, 콜드체인 영역을 확장하기 위해서 신재생에너지 기반 백신 공급 시스템을 구축하였다. 백신 공급 시스템은 신재생 에너지로 전기를 공급하는 보건소와 이를 연결하는 스마트 백신 캐리어로 구성되었다. 백신 캐리어는 펠티어 소자를 이용하여 냉각 시스템을 개선하였고, 위치 및 온도 모니터링 장비를 설치하였다. 또한, 네팔의 남부 마을에서 현장시험과 지형학적 분석으로 개발된 시스템의 성능 및 효과를 평가하였다. 신재생에너지 시스템은 보건소의 냉장고를 정상적으로 작동시켰으며, 백신 캐리어는 더욱 긴 냉장 시간과 안정적인 온도 조절 성능을 확보하였다. 지형학적 분석 결과, 본 시스템이 기존보다 넓은 지역으로 백신을 보급할 수 있을 것으로 추정하였다. 따라서, 신재생에너지와 스마트 기기의 도입이 콜드체인 영역을 확장하고 백신 공급율을 증가시켜, 결과적으로 개발도상국의 농촌 지역 의료 서비스를 개선할 수 있을 것으로 기대한다.

• 한국재료학회지
• /
• 제19권2호
• /
• pp.61-67
• /
• 2009

Electrolessly deposited Co (Re,P) was investigated as a possible capping layer for Cu wires. 50 nm Co (Re,P) films were deposited on Cu/Ti-coated silicon wafers which acted as a catalytic seed and an adhesion layer, respectively. To obtain the optimized bath composition, electroless deposition was studied through an electrochemical approach via a linear sweep voltammetry analysis. The results of using this method showed that the best deposition conditions were a $CoSO_4$ concentration of 0.082 mol/l, a solution pH of 9, a $KReO_4$ concentration of 0.0003 mol/l and sodium hypophosphite concentration of 0.1 mol/L at $80^{\circ}C$. The thermal stability of the Co (Re,P) layer as a barrier preventing Cu was evaluated using Auger electron spectroscopy and a Scanning calorimeter. The measurement results showed that Re impurities stabilized the h.c.p. phase up to $550^{\circ}C$ and that the Co (Re,P) film efficiently blocked Cu diffusion under an annealing temperature of $400^{\circ}C$ for 1hr. The good barrier properties that were observed can be explained by the nano-sized grains along with the blocking effect of the impurities at the fast diffusion path of the grain boundaries. The transformation temperature from the amorphous to crystal structure is increased by doping the Re.