• Journal of electromagnetic engineering and science
• /
• v.11 no.1
• /
• pp.34-41
• /
• 2011

This paper proposes a systematic design for a precoding codebook for a transmit-ing space-division multiple access (TN-SDMA) sharing spectrum with existing fixed wireless service (FWS). Based on an estimated direction angle of a victim FWS system, an interfering transmitter adaptively constructs a codebook, forming a transmit in the direction angle, while satisfying orthogonal beamforming constraints. Sum throughput results indicate that the throughput loss of TN-SDMA relative to a practical SDMA, called per user unitary and rate control ($PU^2RC$), is lower at larger number of transmission antennas, lower signal-to-noise ratio, or a smaller number of users. In particular, a small loss (12% throughput loss) is provided for practical system parameters. Spectrum sharing results confirm that TNSDMA efficiently shares spectrum with FWS systems by reducing protection distance to more than 66 %. Although a TN-SDMA system always has lower throughput compared to $PU^2RC$ in non-coexistence scenarios; it offers an intriguing opportunity to re-use a spectrum already allocated to an FWS.

• Design & Manufacturing
• /
• v.10 no.2
• /
• pp.34-38
• /
• 2016

In this paper, a transversely isotropic behavior of AZ31 Mg alloy produced by equal-channel angular pressing (ECAP) process was investigated through tensile test and microstructure observation. The effects of initial ECAP pass number on the anisotropic behavior and mechanical properties of the Mg alloy are evaluated after conventional direct extrusion test, which are carried out at a temperature of $200^{\circ}C$. As a result of the tensile test in three directions ($0^{\circ}$, $45^{\circ}$, and $90^{\circ}$ to the extrusion direction of the sheet) at room temperature, elongation of as-extruded AZ31 alloy(ECAP for 0 pass) showed an unusual anisotropic behavior depending on the extrusion direction although the yield strength and tensile strength are similar to the ECAPed AZ31 alloy. After ECAP for 4 passes at $200^{\circ}C$, microstructural observations of ECAPed magnesium alloy showed a significant grain refinement, which is leading to an equiaxed grain structure with average size of $2.5{\mu}m$. The microstructures of the extruded billet are observed by the use of an electron back-scattering diffraction (EBSD) technique to evaluate of the influence on the grain refinement during extrusion process and re-crystallization mechanism of AZ31 Mg alloy.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.1
• /
• pp.57-62
• /
• 1994

$YbFeCoO_4$ single crystal was grown by floating zone method. The atmospheric condition of the growth was controlled in air and the growth rate was 1~2 mm/hr. After melting the feed rod of the composition of $YbFeCoO_4$, $YbFeCoO_4$ was decomposed to $YbFeCoO_4$ and CoO phase in the initial state of the growth. The liquid composition, however, changed to the direction of the eutectic point along the liquidus line and then stopped at the point in which $YbFeCoO_4$ single crystal could be grown. The growth direction of the crystal was preferred orientation [110], perpendicular to the c-axis in the hexagonal system due to using the polycrystalline seed.

• Journal of Internet Computing and Services
• /
• v.14 no.6
• /
• pp.117-124
• /
• 2013

In this paper, we present a new method which efficiently estimates a face direction from a sequences of input video images in real time fashion. For this work, the proposed method performs detecting the facial region and major facial features such as both eyes, nose and mouth by using the Haar-like feature, which is relatively not sensitive against light variation, from the detected facial area. Then, it becomes able to track the feature points from every frame using optical flow in real time fashion, and determine the direction of the face based on the feature points tracked. Further, in order to prevent the erroneously recognizing the false positions of the facial features when if the coordinates of the features are lost during the tracking by using optical flow, the proposed method determines the validity of locations of the facial features using the template matching of detected facial features in real time. Depending on the correlation rate of re-considering the detection of the features by the template matching, the face direction estimation process is divided into detecting the facial features again or tracking features while determining the direction of the face. The template matching initially saves the location information of 4 facial features such as the left and right eye, the end of nose and mouse in facial feature detection phase and reevaluated these information when the similarity measure between the stored information and the traced facial information by optical flow is exceed a certain level of threshold by detecting the new facial features from the input image. The proposed approach automatically combines the phase of detecting facial features and the phase of tracking features reciprocally and enables to estimate face pose stably in a real-time fashion. From the experiment, we can prove that the proposed method efficiently estimates face direction.

• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.29.1-29.1
• /
• 2011

The magnetic dipolarizations at the tail are often, if not always, associated with plasma flows of some magnitude. The associated flow direction is known to be earthward most often but not necessarily always. It is the primary goal of this paper to clarify the association between dipolarizations and the associated flow characteristics in general, but with a primary emphasis on tailward flow cases. Based on a number of dipolarizations that we identify at the near-Earth tail using the THEMIS tail observations we first confirm that dipolarizations can in general initiate in association with both earthward and tailward flows. Also, the main direction of the plasma flow, whether being earthward or tailward, is not critical in determining the intensity of the dipolarizations. We actually identify some events of tailward flow-associated dipolarizations that are as much intense as the earthward flow-associated events. The occurrence rate of the tailward flow-associated dipolarizations is mainly concentrated in the radial region of < 10 RE and in the local time region of 22-01 hr. However, its relative occurrence rate is rather low, ~19 % in the radial region and ~15.3 % in the local time region, as compared to that for the events associated with all other types of flows. Furthermore, the flow direction often changes no matter whether it is initially earthward or tailward near the onset time. As a consequence, the net transport of the magnetic flux during the main duration of the dipolarization process is earthward for nearly all of the dipolarizations that initiate with dominantly tailward flows near the onset, as is the case for those that initiate with dominantly earthward flows.

• Wind and Structures
• /
• v.20 no.1
• /
• pp.37-58
• /
• 2015

As wind flows around a sharp-edged body, the resulting separated flow becomes complicated, with multiple separations and reattachments as well as vortex recirculation. This widespread and unpredictable phenomenon has long been studied academically as well as in engineering applications. In this study, the flow characteristics around rectangular prisms with five different aspect ratios were determined through wind tunnel experiments and a detached eddy simulation, that placed the objects in a simulated deep turbulent boundary layer at $Re=4.6{\times}10^4$. A series of rectangular prisms with the same height (h = 80 mm), different longitudinal lengths (l = 0.5h, h, and 2h), or different transverse widths (w = 0.5h, h, and 2h) were employed to observe the effects of the aspect ratio. Furthermore, five wind directions ($0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$, and $45^{\circ}$) were selected to observe the effects of the wind direction. The simulated results of the surface pressure were compared to the wind tunnel experiment results and the existing results of previous papers. The vortex and spectrum were also analyzed to determine the detailed flow structure around the body. The paper also highlights the pressure distribution around the rectangular prisms with respect to the different aspect ratios. With an increasing transverse width, the surface suction pressure on the top and side surfaces becomes stronger. In addition, depending on the wind direction, the pressure coefficient experiences a large variation and can even change from a negative to a positive value on the side surface of the cube model.

• The Journal of the Korea Contents Association
• /
• v.21 no.9
• /
• pp.391-403
• /
• 2021

This study was studied to analyze the current early childhood education system based on elements of education publicness and to explore policy tasks for developing early childhood education policies. Qualitative literature analysis was conducted by collecting official government documents and reports from national research institutes, and the publicity level of early childhood education was evaluated based on the elements of publicity. As a result of the study, Korea's early childhood education policy has been promoted in the direction of strengthening the public nature of early childhood education, such as the introduction of the Nuri course. Quantitative expansion of public nature has been achieved, but now it is necessary to re-establish the policy direction focusing on the qualitative reinforcement of public nature and to supplement the system. This study suggests a direction for a review of early childhood education in general.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.419-420
• /
• 2002

The piston-cylinder mechanism is widely adopted in the hydraulic machine components. In these cases, the hydrodynamic pressures are generated in the clearance gap between the piston and cylinder under lubrication action of the oils. Under the eccentric condition of the piston in the cylinder bore, the asymmetric pressure distributions in the circumferential direction result in lateral forces on the piston. When the lateral forces act as increasing the piston eccentricity, excessive wear can be occurs in the cylinder bore and piston. In this paper, the hydrodynamic pressures generated in the clearance are measured using a stationary piston and moving cylinder apparatus. The experimental results showed that the hydrodynamic pressure distributions are highly affected by the eccentricity of the piston.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.4
• /
• pp.247-261
• /
• 2016

Objective:The aim of this paper is to discuss the nuclear safety culture in Korea. Background: Recently, Korean nuclear field has met a strong anti-nuclear trend after a few happenings, as well as Fukushima accident, which are turned out to be caused by organizational pitfalls and safety culture defects in general. Method: We review the concepts and constructs of safety culture based on the brief history of the nuclear safety culture that IAEA mainly raised after the Chernobyl accident in 1986. Additionally, we give a comparative discussion on the approach to the safety culture with U.S. Results: Finally, we discuss the three technical domains and propose six selected domestic issues related to the nuclear safety culture for coping with the demanding requests on nuclear safety in Korea. Conclusion and Application: We suggest several recommendations and a research direction in the form of a re-start line for the nuclear safety culture in Korea.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.148-153
• /
• 2001

A computational investigation of the effect of the electromagnetic force(or Lorentz force) on the flow behavior around a circular cylinder, a typical model of bluff bodies, is conducted. Two-dimensional unsteady flow computation for $Re=10^2$ is carried out using a numerical method of finite difference approximation in a curvilinear body-fitted coordinate system by solving the momentum equations including the Lorentz force as a body force. The effect of the spatial variations of the Lorentz forcing region and forcing direction along the cylinder circumference is investigated. The numerical results show that the Lorentz force can effectively suppress the flow separation and oscillation of the lift force of the circular cylinder cross-flow, leading to the reduction of the drag.