• Journal of electromagnetic engineering and science
• /
• 제11권1호
• /
• pp.34-41
• /
• 2011

This paper proposes a systematic design for a precoding codebook for a transmit-ing space-division multiple access (TN-SDMA) sharing spectrum with existing fixed wireless service (FWS). Based on an estimated direction angle of a victim FWS system, an interfering transmitter adaptively constructs a codebook, forming a transmit in the direction angle, while satisfying orthogonal beamforming constraints. Sum throughput results indicate that the throughput loss of TN-SDMA relative to a practical SDMA, called per user unitary and rate control ($PU^2RC$), is lower at larger number of transmission antennas, lower signal-to-noise ratio, or a smaller number of users. In particular, a small loss (12% throughput loss) is provided for practical system parameters. Spectrum sharing results confirm that TNSDMA efficiently shares spectrum with FWS systems by reducing protection distance to more than 66 %. Although a TN-SDMA system always has lower throughput compared to $PU^2RC$ in non-coexistence scenarios; it offers an intriguing opportunity to re-use a spectrum already allocated to an FWS.

• Design & Manufacturing
• /
• 제10권2호
• /
• pp.34-38
• /
• 2016

In this paper, a transversely isotropic behavior of AZ31 Mg alloy produced by equal-channel angular pressing (ECAP) process was investigated through tensile test and microstructure observation. The effects of initial ECAP pass number on the anisotropic behavior and mechanical properties of the Mg alloy are evaluated after conventional direct extrusion test, which are carried out at a temperature of $200^{\circ}C$. As a result of the tensile test in three directions ($0^{\circ}$, $45^{\circ}$, and $90^{\circ}$ to the extrusion direction of the sheet) at room temperature, elongation of as-extruded AZ31 alloy(ECAP for 0 pass) showed an unusual anisotropic behavior depending on the extrusion direction although the yield strength and tensile strength are similar to the ECAPed AZ31 alloy. After ECAP for 4 passes at $200^{\circ}C$, microstructural observations of ECAPed magnesium alloy showed a significant grain refinement, which is leading to an equiaxed grain structure with average size of $2.5{\mu}m$. The microstructures of the extruded billet are observed by the use of an electron back-scattering diffraction (EBSD) technique to evaluate of the influence on the grain refinement during extrusion process and re-crystallization mechanism of AZ31 Mg alloy.

• 한국결정성장학회지
• /
• 제4권1호
• /
• pp.57-62
• /
• 1994

FZ법을 이용하여 $YbFeCoO_4$ 단결정을 성장하였다. 결정 성장은 공기분위기 중에서 이루어졌으며, 성장 속도는 1~2mm/hr로 조절하였으며, 성장 초기는 $YbReO_3$와 CoO로 분해 되었으나 용융 후 액상의 조성이 변화됨에 따라 $YbFeCoO_4$ 단일사의 단결정이 육성되었다.결정의 성장 방향은 c축에 수직으로 성장하였으며 다결정의 종자 결정을 이용하여 용이성장축으로 성장된 결정의 성장 방향은[110]방향이었다.

• 인터넷정보학회논문지
• /
• 제14권6호
• /
• pp.117-124
• /
• 2013

본 논문에서는 실시간으로 입력되는 비디오 영상으로부터 사용자의 얼굴 방향을 효율적으로 추정하는 새로운 방법을 제안하였다. 이를 위하여 입력 영상으로부터 외부조명의 변화에 덜 민감한 Haar-like 특성을 이용하여 얼굴영역의 검출을 수행하고 검출 된 얼굴영역 내에서 양쪽 눈, 코, 입 등의 주요 특성을 검출한다. 이 후 실시간으로 매 프레임마다 광류를 이용해 검출된 특징 점을 추적하게 되며, 추적된 특징 점을 이용해 얼굴의 방향성 추정한다. 일반적으로 광류를 이용한 특징 추적에서 발생할 수 있는 특징점의 좌표가 유실되어 잘못된 특징점을 추적하게 되는 상황을 방지하기 위하여 검출된 특징점의 템플릿 매칭(template matching)을 사용해 추적중인 특징점의 유효성을 실시간 판단하고, 그 결과에 따라 얼굴 특징 점들을 다시 검출하거나, 추적을 지속하여 얼굴의 방향성을 추정을 가능하게 한다. 탬플릿 매칭은 특징검출 단계에서 추출된 좌우 눈, 코끝 그리고 입의 위치 등 4가지 정보를 저장한 후 얼굴포즈 측정에 있어 광류에의해 추적중인 해당 특징점들 간의 유사도를 비교하여 유사도가 임계치를 벗어 날 경우 새로이 특징점을 찾아내는 작업을 수행하여 정보를 갱신한다. 제안된 방법을 통해 얼굴의 특성 추출을 위한 특성 검출과정과 검출된 특징을 지속적으로 보완하는 추적과정을 자동적으로 상호 결합하여 안정적으로 실시간에 얼굴 방향성 추정 할 수 있었다. 실험을 통하여 제안된 방법이 효과적으로 얼굴의 포즈를 측정할 수 있음을 입증하였다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2011년도 한국우주과학회보 제20권1호
• /
• pp.29.1-29.1
• /
• 2011

The magnetic dipolarizations at the tail are often, if not always, associated with plasma flows of some magnitude. The associated flow direction is known to be earthward most often but not necessarily always. It is the primary goal of this paper to clarify the association between dipolarizations and the associated flow characteristics in general, but with a primary emphasis on tailward flow cases. Based on a number of dipolarizations that we identify at the near-Earth tail using the THEMIS tail observations we first confirm that dipolarizations can in general initiate in association with both earthward and tailward flows. Also, the main direction of the plasma flow, whether being earthward or tailward, is not critical in determining the intensity of the dipolarizations. We actually identify some events of tailward flow-associated dipolarizations that are as much intense as the earthward flow-associated events. The occurrence rate of the tailward flow-associated dipolarizations is mainly concentrated in the radial region of < 10 RE and in the local time region of 22-01 hr. However, its relative occurrence rate is rather low, ~19 % in the radial region and ~15.3 % in the local time region, as compared to that for the events associated with all other types of flows. Furthermore, the flow direction often changes no matter whether it is initially earthward or tailward near the onset time. As a consequence, the net transport of the magnetic flux during the main duration of the dipolarization process is earthward for nearly all of the dipolarizations that initiate with dominantly tailward flows near the onset, as is the case for those that initiate with dominantly earthward flows.

• Wind and Structures
• /
• 제20권1호
• /
• pp.37-58
• /
• 2015

As wind flows around a sharp-edged body, the resulting separated flow becomes complicated, with multiple separations and reattachments as well as vortex recirculation. This widespread and unpredictable phenomenon has long been studied academically as well as in engineering applications. In this study, the flow characteristics around rectangular prisms with five different aspect ratios were determined through wind tunnel experiments and a detached eddy simulation, that placed the objects in a simulated deep turbulent boundary layer at $Re=4.6{\times}10^4$. A series of rectangular prisms with the same height (h = 80 mm), different longitudinal lengths (l = 0.5h, h, and 2h), or different transverse widths (w = 0.5h, h, and 2h) were employed to observe the effects of the aspect ratio. Furthermore, five wind directions ($0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$, and $45^{\circ}$) were selected to observe the effects of the wind direction. The simulated results of the surface pressure were compared to the wind tunnel experiment results and the existing results of previous papers. The vortex and spectrum were also analyzed to determine the detailed flow structure around the body. The paper also highlights the pressure distribution around the rectangular prisms with respect to the different aspect ratios. With an increasing transverse width, the surface suction pressure on the top and side surfaces becomes stronger. In addition, depending on the wind direction, the pressure coefficient experiences a large variation and can even change from a negative to a positive value on the side surface of the cube model.

• 한국콘텐츠학회논문지
• /
• 제21권9호
• /
• pp.391-403
• /
• 2021

본 연구는 교육 공공성의 개념적 요소에 비추어 현재 유아교육의 현황을 짚어보고, 향후 유아교육 발전을 위한 정책적 과제들을 도출하기 위해 수행되었다. 정부 공식문서, 국책연구기관 보고서를 수집하여 정성적 문헌분석을 실시하였으며, 공공성 구성요소들을 준거로 하여 유아교육의 공공성 수준을 평가하였다. 연구결과 그 동안의 우리나라의 유아교육 정책은 누리과정 도입 등 유아교육의 공공성을 강화하는 방향으로 추진되어 왔다. 공공성의 양적 확대는 이루어졌으나, 이제는 공공성의 질적 강화에 초점을 둔 정책방향의 재설정 및 제도보완이 요구된다. 본 연구는 유아교육 전반에 대한 재검토 방향에 대한 시사점을 제공하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.419-420
• /
• 2002

The piston-cylinder mechanism is widely adopted in the hydraulic machine components. In these cases, the hydrodynamic pressures are generated in the clearance gap between the piston and cylinder under lubrication action of the oils. Under the eccentric condition of the piston in the cylinder bore, the asymmetric pressure distributions in the circumferential direction result in lateral forces on the piston. When the lateral forces act as increasing the piston eccentricity, excessive wear can be occurs in the cylinder bore and piston. In this paper, the hydrodynamic pressures generated in the clearance are measured using a stationary piston and moving cylinder apparatus. The experimental results showed that the hydrodynamic pressure distributions are highly affected by the eccentricity of the piston.

• 대한인간공학회지
• /
• 제35권4호
• /
• pp.247-261
• /
• 2016

Objective:The aim of this paper is to discuss the nuclear safety culture in Korea. Background: Recently, Korean nuclear field has met a strong anti-nuclear trend after a few happenings, as well as Fukushima accident, which are turned out to be caused by organizational pitfalls and safety culture defects in general. Method: We review the concepts and constructs of safety culture based on the brief history of the nuclear safety culture that IAEA mainly raised after the Chernobyl accident in 1986. Additionally, we give a comparative discussion on the approach to the safety culture with U.S. Results: Finally, we discuss the three technical domains and propose six selected domestic issues related to the nuclear safety culture for coping with the demanding requests on nuclear safety in Korea. Conclusion and Application: We suggest several recommendations and a research direction in the form of a re-start line for the nuclear safety culture in Korea.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.148-153
• /
• 2001

A computational investigation of the effect of the electromagnetic force(or Lorentz force) on the flow behavior around a circular cylinder, a typical model of bluff bodies, is conducted. Two-dimensional unsteady flow computation for $Re=10^2$ is carried out using a numerical method of finite difference approximation in a curvilinear body-fitted coordinate system by solving the momentum equations including the Lorentz force as a body force. The effect of the spatial variations of the Lorentz forcing region and forcing direction along the cylinder circumference is investigated. The numerical results show that the Lorentz force can effectively suppress the flow separation and oscillation of the lift force of the circular cylinder cross-flow, leading to the reduction of the drag.