• 대한조선학회논문집
• /
• 제44권3호
• /
• pp.258-266
• /
• 2007

CFD calculations are performed for KRISO 3600TEU container ship(KCS) models with different Reynolds numbers. Numerical calculations of the turbulent flows with the free surface around KCS have been carried out at $Re=0.791{\times}106\;and\;Re=1.4{\times}107$ using a standard Fluent package. In both cases, Froude number is fixed with 0.26 and wave elevation is simulated by using the VOF method. The calculated results at $Re=1.4{\times}107\;and\;Re=0.791{\times}106$ are compared with the experiment data of KRISO towing tank test and RIMS CWC test, respectively. Boundary layer thickness and wake field shows Reynolds number differences. There are some changes in wave pattern behind transom stern.

• 가정간호학회지
• /
• 제18권1호
• /
• pp.13-19
• /
• 2011

Purpose: The aim of this study was to evaluate patient satisfaction and indirect marketing effects (recommendation, hospital re-visit intention) and additionally to calculate the expected incomes by clinical nurse specialists (CNS). Methods: Sixty-six patients who had lower varicose vein removal surgery performed at two general hospitals from August 1 to November 30, 2008, were recruited. The effects were evaluated by degree of patient satisfaction, the number of personal recommendations given, rate of hospital re-visit intention, and indirect marketing effects. Indirect marketing effects were calculated as the total cost of surgery multiplied by the score of other variables. Results: The patient satisfaction score was 0.82 for CNS and 0.43 for general nurses (GN). The number of personal recommendations given was 2.5 for CNS and 1.1 for GN. The rate of hospital re-visit intention was 0.31 for CNS and 0.21 fot GN. The ratio of expected incomes between CNS and GN is 2.07 to 1. Conclusion: We found that when a CNS serves a patient, satisfaction, number of personal recommendations, hospital re-visit intention, and indirect marketing effects were higher than those of GN. These results show that CNS have dominant roles and functions and that the effects of CNS employment can be measured using economics parameters.

• 한국수산과학회지
• /
• 제12권3호
• /
• pp.155-160
• /
• 1979

Lactic acid발효능이 있는 L. bulgaricus의 증식에 미치는 기계적 교반의 효과 및 동력학적 결과는 다음과 같다. 1) L. bulgaricus를 30시간 발효시켰을 때 세균의 농도는 액면변화가 적은 $N_{Re}=1\times10^5\~5\times10^5$ 범위에서는 2.4 UOD/ml로 동일 하였으며 $N_{Re}=1\times10^5\~1\times10^6$일 때 2.9UOD/ml로 가장 높은 값이었다. 2) 발효 30시간후 포도당의 잔량은 $N_{Re}=1\times10^5\~5\times10^5$범위에서 18g/l, $N_{Re}=1\times10^6$인 경우 8.3g/l였다. 3) 최대비증식속도$(\mu_{max})$는 $N_{Re}=1\times10^5\~5\times10^5$에서 $0.28hr^{-1},\;N_{Re}=1\times10^6에서 $0.58hr^{-1}이었다. 4) Saturation constant $(K_s)는 $N_{Re}=1\times10^5\~5\times10^5$ 3.44g/l, $N_{Re}=1\times10^6$에서 6.74g/l이었다.

• 한국항공우주학회지
• /
• 제48권5호
• /
• pp.323-334
• /
• 2020

경계층 천이는 극초음속 비행체의 열공력 성능에 직접적인 영향을 미치기 때문에, 성능 해석과 설계를 위해 천이지점의 정확한 예측 능력이 필수적으로 요구된다. 본 연구에서는 극초음속 경계층 천이 예측을 위한 γ-Re_θt 모델을 개선하고 검증하였다. 천이 시작 위치 결정에 영향을 주는 간헐도 수송방정식 생성항의 계수를 압축성 경계층 상사해를 기반으로 마하수와 벽면온도, 자유류 정체온도 등에 대한 함수 형태로 구성하고 적용하였다. 기본 모델의 Re_θc와 F_length 상관관계식에 마하수에 따른 천이 시작 운동량두께 레이놀즈수와 천이구간의 길이 변화를 반영할 수 있도록 마하수에 대한 관계식을 추가로 결정하여 적용하였다. 실용적인 사용을 고려하여 제안 모델을 상용 CFD 코드에 적용하였으며, 검증을 위해 모델을 사용하여 극초음속 평판과 원뿔 경계층 해석을 수행하였다. 실험 결과와의 비교를 통해 마하수와 단위 레이놀즈수 변화에 대한 개선된 예측성능을 확인하였다.

• Plant Resources
• /
• 제5권2호
• /
• pp.141-154
• /
• 2002

In this experiment, three kinds of mutations(ge, re, and eml )relating to the size of embryos were used to study their generation, genetic mechanism and developmental characteristics, and the interactions between embryo and endosperm were also examined. Giant embryo mutation comprises 7 kinds including the already isolated ge, and ge-2, which share an identical gene site. The SAM and the size of radicule for the ge showed little difference compared to a normal type. The number of embryo cells did not increased as much as it would affect the size of embryo. Therefore, the enlargement of embryo was due to the enlargement of scutellum that originated from the corpulence of each cell. Both F$_1$' s of re ]and odm 49 formed reduce embryos, and other combinations of hybridization showed all wild type of embryo sizes. Accordingly, the odm 49 must have an identical gene site of re 1, while odm 48 and odm 62 have different gene sites. Their shoots and radicules also shrank by the same ratio, however no sign of physical change was noticed. The size of embryo cell showed no change, while the number of cells was the half of that of wild types. The three gene sites of re represent all of them control the size of the entire embryo forming organs. The eml 1 was defined to have temperature sensibilities that the generation of endosperms was active at a high temperature while that was hampered at a low temperature.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.504-507
• /
• 2011

The inertial migration of a two-dimensional elastic capsule in a channel flow was studied over the Reynolds number range $1{\leq}Re{\leq}100$. The lateral migration velocity, slip velocity, and the deformation and inclination angle of the capsule were investigated by varying the lateral position, Reynolds number, capsule-to-channel size ratio(${\lambda}$), membrane stretching coefficient(${\Phi}$), and membrane bending coefficient(${\gamma}$). During the initial transient motion, the lateral migration velocity increased with increasing Re and ${\lambda}$ but decreased with increases in ${\Phi}$, ${\gamma}$ and the lateral distance from the wall. The initial behavior of the capsule was influenced by variation in the initial lateral position ($y_0$), but the equilibrium position of the capsule was not affected by such variation. The balance between the wall effect and the shear gradient effect determined the equilibrium position. As Re increased, the equilibrium position initially shifted closer to the wall and then moved towards the channel center. A peak in the equilibrium position was observed near Re=30 for ${\gamma}=0.1$, and the peak shifted to higher Re as ${\gamma}$ increased. Depending on the lateral migration velocity, the equilibrium position moved toward the centerline for larger ${\gamma}$ but moved toward the wall for larger ${\Phi}$ and ${\gamma}$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.810-815
• /
• 2003

Flow-induced noise propagated from flow over a sphere is numerically investigated for laminar flow at Re = 300 and 425, and for turbulent flow at Re = 3700 and $10^4$, where the Reynolds number is based on the freestream velocity and the sphere diameter. The numerical method used for obtaining the flow over a sphere is based on an immersed boundary method in a cylindrical coordinate system. The Curle’s solutions of the Lighthill’s acoustic analogy with and without the far-field and compact-source approximation are used in order to investigate the noise field from flow over a sphere. Since the drag and lift forces change irregularly in time at Re = 425, 3700 and $10^{4}$, the noise propagates in a complicated manner. At Re = 300, 425 and $10^{4}$, the noise from dipole sources is much larger than that from quadrupole sources. On the other hand, at Re = 3700, the quadrupole source becomes dominant. The temporal variation of the flow-induced noise around a sphere is obtained at some observation points, which shows that the peak frequency corresponds to the Strouhal number associated with the wake instability.

• Membrane and Water Treatment
• /
• 제14권1호
• /
• pp.47-54
• /
• 2023

In this study, high concentrations of cadmium-containing wastewater were treated by electrodialysis (ED) with a channel stack. The limiting current density (LCD), cadmium removal efficiency, and current efficiency were investigated under each experimental condition according to the Reynolds number (Re), membrane area, and pH. With the increase in the film area to 111, 333, 555, and 777 cm² at Re (109.1), LCDs decreased to 408.11, 44.45, 35.32, and 13.64 A/m², respectively. The highest cadmium removal efficiency (99.6%) and current efficiency were obtained for the membrane area of 111 and 777 cm², respectively. Under changing Re in the pH range of 1 to 4, Re and LCD were proportional under the same pH condition, and pH and LCD tended to be inversely proportional under the same Re condition. Cadmium removal rate was the best at the pH range 3 - 4. It has been found that ED with channeled stacks can be successfully applied to treat wastewater containing high concentrations of cadmium.

• 대한기계학회논문집B
• /
• 제36권3호
• /
• pp.301-307
• /
• 2012

정밀한 물질분배기관인 인체 기관지의 기능을 이해하기 위해서는 호흡에서 발생하는 다양한 유동 및 형상 조건에서 압력손실특성을 파악하는 것이 필수적이다. 본 연구는 기관지 구조의 기본 단위인 분지관의 층류 흡기유동 압력손실을 수치해석을 통해 확인하였다. 인체 기관지에 대한 관찰에서 보고되는 비대칭 형상과 유량분배비율 범위 안에서 압력손실계수 K 는 Re 와 관의 길이만의 함수로 다음과 같이 표현이 가능하며 $K{\propto}Re^{-1}(\frac{L}{d})^{3/4}$, Re<100, $K{\propto}Re^{-1/2}\(\frac{L}{d}\)^{1/2}$, $Re\geq100$, 이는 대칭 분지관의 관계식과 동일한 것이다. 연속분지로 입구 유속분포가 편향될 경우 분지관 압력손실의 변화는 4% 미만이었으며 분지가 반복될수록 그 차이는 줄어들어 무시할 만하였다.

• 한국재료학회지
• /
• 제23권1호
• /
• pp.24-30
• /
• 2013

Today, the modification of carbon foam for high performance remains a major issue in the environment and energy industries. One promising way to solve this problem is the optimization of the pore structure for desired properties as well as for efficient performance. In this study, using a sol-gel process followed by carbonization in an inert atmosphere, hollow spherical carbon foam was prepared using resorcinol and formaldehyde precursors catalyzed by 4-aminobenzoic acid; the effect of carbonization temperature and re-immersion treatment on the pore structure and characteristics of the hollow spherical carbon foam was investigated. As the carbonization temperature increased, the porosity and average pore diameter were found to decrease but the compression strength and electrical conductivity dramatically increased in the temperature range of this study ($700^{\circ}C$ to $850^{\circ}C$). The significant differences of X-ray diffraction patterns obtained from the carbon foams carbonized under different temperatures implied that the degree of crystallinity greatly affects the characteristics of the carbon form. Also, the number of re-impregnations of carbon form in the resorcinol-formaldehyde resin was varied from 1 to 10 times, followed by re-carbonization at $800^{\circ}C$ for 2 hours under argon gas flow. As the number of re-immersion treatments increased, the porosity decreased while the compression strength improved by about four times when re-impregnation was repeated 10 times. These results imply the possibility of customizing the characteristics of carbon foam by controlling the carbonization and re-immersion conditions.