• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.3
• /
• pp.216-221
• /
• 2010

Employing statistical design of experiments, the difference in doping behaviors of rare-earth ions and their effects on the dielectric property and microstructure of $BaTiO_3$-MgO-$MnO_2$-($Ba_{0.4}Ca_{0.6}$) $SiO_3-Re_2O_3$ (Re = $Y_2O_3$, $Er_2O_3$) system were investigated. Through the statistical analysis we have found that the amount of $Re_2O_3$ are significantly affecting on the dielectric properties. The $Re_2O_3$ improved the dielectric constant, dielectric loss and R*C constant, so the appropriate contents of $Y_2O_3$ and $Er_2O_3$ were 0.8 ~ 1.2 mol% and 0.8 ~ 1.3 mol%, respectively. The MLCC(mutilayer chip capacitor) with $2.0{\times}1.2{\times}1.2mm$ size and 475 nF was also suited for X7R with the above composition. It showed that the dielectric constant and RC constant were 2,839 and 3,675 ${\Omega}F$, respectively in the sintering condition at $1250^{\circ}C$ in $Po_2$ $10^{-7}$ Mpa.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.216-217
• /
• 2005

In this paper, in order to develop Pb-free piezoelectric ceramics, $(Li_{0.05}Na_{0.57}K_{0.38})NbO_3$ ceramic was fabricated with the variation of $Bi_2O_3$ addition. Piezoelectric properties of the ceramic were varied with the amount of $Bi_2O_3$ addition and showed the maximum kp value at.0.2 wt% $Bi_2O_3$ addition. Qm of $Bi_2O_3$ added ceramics showed lower values than the non-added ceramics, however, the kp was increased by the addition of $Bi_2O_3$ up to 0.2 wt%. At the sintering temperature of 1110$^{\circ}C$ and the calcination temperature of 850$^{\circ}C$, the optimal values of density=4.52g/$cm^3$, kp=0.47, $\varepsilon_r$=400 were obtained.

• Korean Journal of Crystallography
• /
• v.7 no.2
• /
• pp.113-119
• /
• 1996

Reaction of Re(O)(PPh3)2Cl3,I, with 2,3,4,5,6-pentafluoroaniline (C6F5NH2), produced Re(NC6F5)(PPh3)2Cl3, II. The product has been characterized by 1H-NMR, elemental analysis, and X-ray diffraction. II crystallizes in the orthorhombic system, space group Pna21 with cell parameters a=18.763Å, b=14.737(2)Å, c=16.707(3)Å, Z=4. Least-square refinement of the structure led to an R(wR2)factor of 0.0455(0.1148) for 3319 unique reflections of I > 2σ(I) and for 174 variables.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1091-1094
• /
• 2004

High-luminous efficiency full-color emissions in photoluminescence (PL) were obtained in $GdVO_4$ phosphor thin films co-doped with various amounts of Eu, Er and/or Tm and postannealed at approximately 1000$^{\circ}C$. The $GdVO_4$:Eu,Er,Tm phosphor thin films were deposited on thick $BaTiO_3$ ceramic sheets by r.f. magnetron sputtering using powder targets and postannealed in an air atmosphere. The rare earth (RE) content (RE/(Gd+V+RE) atomic ratio) in the oxide phosphor thin films was varied in the range from 0.1 to 2 at.%. It was found that the excitation of $GdVO_4$:Eu.Er,Tm thin films is attributed to band-to-band transition. A white PL emission was obtained in a $GdVO_4$:Eu,Er,Tm thin film with Eu, Er and Tm contents of 0.2, 0.7 and 1 at.%, respectively: CIE chromaticity color coordinates. (X=0.352 and Y=0.351). In addition, a white emission was obtained in a thin-film electroluminescent (TFEL) device made with this thin film.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.218-219
• /
• 2005

In this paper, in order to develop Pb-free piezoelectric ceramics, $[Li_{0.04}(Na_{0.44}K_{0.52})-(Nb_{0.86}Ta_{0.10}Sb_{0.04})]O_3$ ceramic was fabricated with the variation of ZnO addition. Piezoelectric properties of the ceramic were varied with the amount of ZnO addition and showed the maximum kp value at 0.2 wt% ZnO addition. Qm of ZnO added ceramics showed lower values than the non-added ceramics, however, the kp was increased by the addition of ZnO up to 0.2 wt%. At the sintering temperature of 1110$^{\circ}C$ and the calcination temperature of 850$^{\circ}C$, the optimal values of density=473g/$cm^3$, kp=0.473, $\varepsilon_r$=1403 were obtained.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.2
• /
• pp.199-208
• /
• 2019

This study reports water-resistant oil-in-water (O/W) emulsion-based sunscreening formulations prepared using a poly(ethylene glycol)-poly(${\varepsilon}$-caprolactone)-poly(ethylene glycol) (PEG-PCL-PEG) triblock polymeric surfactant. As a result of a variety of outdoor recreational activities such as swimming and hiking, consumer needs for development of advanced water-resistant sunscreen formulations are increasing. Water-resistant sunscreens are mostly based on water-in-oil (W/O) emulsions, because they should not be wiped off by water or sweat. However, the W/O emulsion formulations have a disadvantage in that the feeling of use is oily and difficult to remove. On the other hand, the O/W emulsion formulations are excellent in achieving the better skin feel as well as the easier removal. However, it is difficult to provide the O/W emulsion formulations with the water-repelling performance, since re-emulsification likely occurs upon getting touch with water. To solve this problem, this study proposes a O/W emulsion-based sunscreen formulation, a triblock polymeric surfactant having relatively high interfacial tension HLB value (~ 10). This allows the sunscreen formulations to exhibit the improved water repellence function by preventing their re-emulsification. The sunscreen formation system prepared in this study would be useful for diversification of functional sunscreen products, taking advantages of its excellent emulsion stability, UV protection performance, long lasting water-resistant function and selective cleansing effect with only foam cleanser.

• Journal of Power System Engineering
• /
• v.10 no.2
• /
• pp.29-35
• /
• 2006

Two-dimensional numerical simulation has been performed to investigate mixed convection heat transfer between inclined parallel plates with bottom-heated and top-cooled uniformly. The ratio of parallel plate length to height is 9.33, Prandtl number is 909(that of silicone oil at 298K) and Rayleigh number is 8600. In the ranges of the Reynolds number Re from 0 to 1.8 and the angle of inclination ${\theta}$ from 0 to 90 degree. The governing equations are discretized using the finite volume method. In this study, the effects of the Reynolds number, the angle of inclination, and the local and mean Nusselt numbers are presented and discussed. It is found that the periodic flow of mixed convection between inclined parallel plates is shown at $0^{\circ}{\leq}\;{\theta}<30^{\circ},\;Re<0.063$, and the flow pattern can be classified into three patterns which depend on Reynolds number and the angle of inclination. The minimum average Nusselt numbers occur at Re=0.05 regardless of the angle of inclination.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.3
• /
• pp.126-135
• /
• 2008

The purpose of this study is to develop the efficient information system for managing owner's requirement(O/R) throughout the design phases. In order to derive an improvement, current status of O/R management both in domestic and foreign design company has been analyzed. Through the literature reviews and interviews with experts, the Information on design process and detailed activities were investigated. Based on the basic research, inputs, outputs and participants were defined and information flow diagram was drawn. O/R's were categorized according to comprehensive interviews with specialists, and a prototype system was suggested. Conducting systematized O/R management will improve the confidence of owners' role on design, reduce re-work in design tasks, and finally elevate design quality.

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.17-17
• /
• 2018

• Journal of Korean Public Health Nursing
• /
• v.1 no.1
• /
• pp.45-61
• /
• 1987

This Study was an attempt to estimate the optimum numbers of Operating Room Nursing Manpower by measuring the amount of service hours required by the patients in Operating Room in relation to the service amount actually provided by the nurses. The major concern of this study was placed on the measurement of Nursing Service Requirements by using the Operating Room (O. R) Patient Acuity System recently developed by M. M. Hart to classify the O. R. patients into four groups according to the degree of the complexity of operative procedure and some other elements which increase nursing activities in respect of patient care; Acuity IV group is the one requires nursing services most, on the other hand Acuity I requires least. nu sing The objectives of this study were as follows; 1. To analyze functions of the nursing personnel in O. R. by time unit and to estimate the average time a nurse can activate for productive functions. 2. To measure the actual amount of nursing times provided by nurses to the surgical patients. 3. To develop a patient classification system in order to measure the amount of Nursing services required by the patients. 4. To calculate an appropriate number of nursing manpower to meet the needs of the patients. In order to conduct the research both selected nurses and patients in 'S' University Hospital were Studied by utilizing the O. R. Patient Acuity System as well as the Classification Chart developed by Association of Operating Room Nurses (A. O. R. N) as a means of classifying functions of O. R. nurses. That is; Functions of the 10 selected O. R. nurses observed during the period of June 30 to July 4, 1986, whereas the amount of nursing services required by or provided to the 974 patients who had received surgeries during the period of June 9 to July 4, 1986. The results of this study were as follows; 1) The actual working hours per a nurse averaged 6.7 hours a day. 2) Each nurse's daily routine schedule consists of $71.4\%$ for Technical Functions, $16.1\%$ for Nonprodective Functions, $6.6\%$ for Assessment and Evaluation, $3.9\%$ for Overseeing and Supervision and the rest $2.0\%$ for Patient Preparation respectively. 3) Preoperative waiting time per a patient was 24.1 minutes on the average; for the first case was 10.7 minutes, whereas for the following cases was 32.0 minutes. 4) Total Operation time for the 974 patients during the period of observation for this study amounted to 2759.6 hours, weekly hour was equivalent to 689.9 hours, Whereas daily operation time averaged 130 hours. Meanwhile the average operation time per patient was 2.8 hours ; for the case of Acuity IV was 5.6 hours, 5. 1 hours for the case of Acuity III, 2.3 hours for Acuity II and 1.1 hours for Acuity I. 5) According to the O. R. Patient Acuity System, $64.5\%$ of the whole patients belonged to Acuity II, $23.7\%$ to Acuity III, 11. $3\%$ to Acuity IV and $0.7\%$ to Acuity I respectively. 6) Required amount of nursing times based on the preoperative waiting time and operation time was 7167.8 person hours, which showed that $5.5\%$ of them needed for preoperative nursing care, whereas the rest $94.5\%$ for intraoperative nursing care. In terms of the O. R. Patient Acuity System, $49.7\%$ of total nursing service requirements was needed for Acuity II patients, $27.4\%$ for Acuity III patients, $17.2\%$ for Acuity IV patients and $0.2\%$ for Acuity I patients. 7) The rate of the nursing services provided against the required nursing times was about $81.4\%$ on the average; some departments, like those of Plastic Surgery, Otolaryngology and Ophthalmology whose patients mostly belonged to Acuity II recorded hegher provision rate than average, whereas other departments of Thoracic Surgery. Neurosurgery and Orthopedic Surgery whose patients belonged to Acuity III and Acuity IV as well as Acuity II recorded lower provision rate than average. 8) Subsequently, required numbers of nursing manpower was 10.7 nurses additionally. Based on the above findings the following recommendations will be made; 1) this study recommends, develops. and adopts an accurate and realistic O. R. Patient Acuity System which can help measure the nursing service requirements objectively to elicit the rationales of allocation of nursing personnels. 2) this study proposes storongly place nurses who take the role of preoperative nursing care exclusively for the waiting patients in O. R. and shortening their waiting time by close communication between the designated O. R. and the ward.