• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.77-80
• /
• 2008

Low-cycle fatigue (LCF) tests were carried out to investigate the effect of loading direction on the cyclic deformation behavior and fatigue resistance of rolled AZ31 magnesium alloy. The as-received alloy showed a strong basal texture indicating that the most of basal planes of hexagonal close-packed structure were located parallel to the rolling direction. Two types of specimens whose loading directions were oriented parallel (RD) and vertical (ND) to the rolling direction. respectively, were used for the comparison. It was found that RD specimens yielded at much lower stresses during compression, while vice versa for the ND specimens, which was mainly attributed to the formation of primary twins. This anisotropic deformation behavior resulted in the different mean stresses during the cycling of RD and ND specimens, affecting the fatigue resistance of two specimens. The ND specimen showed a superior fatigue resistance as compared to the RD specimen under strain-controlled condition.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.6
• /
• pp.1081-1086
• /
• 2008

This paper presents the $3^{rd}$ 4bit sigma delta modulator with the block and timing diagrams of DWA(Data Weighted Averaging) to optimize a operating time. In the modulator, the proposed DWA structure has a stable operation and timing margin so as to remove three latches and another clock. Because the modulator with proposed DWA structure improve timing margin about 23%. It can increase sampling frequency up to 244MHz. Through the MATLAB modeling, the optimized coefficients are obtained to design the modulator. The fully differential SC integrators, DAC, switch, quantizer, and DWA are designed by considering the nonideal characteristics. The designed $3^{rd}$ order 4bit modulator has a power consumption of 40mW and SNR(signal to noise ratio) of 77.2dB under 1.2V supply and 64MHz sampling frequency.

• The korean journal of orthodontics
• /
• v.17 no.2
• /
• pp.321-333
• /
• 1987

The purpose of this study was to observe the changes of the lower 3rd molars following the extraction of the lower 2nd molars by Lateral Cephalograms and Orthopantomograms. The subjects consisted of twenty malocclusion, 7 males 13 females, were 19 year 5 month old at the removal of the lower 2nd molars, 19 year 1 month old at the end of the orthodontic supervision after the removal of the lower 2nd molars (mean age) The obtained results were as follows, 1 It is recommended to extract the lower 2nd molars when the lower 3rd molars are Nolla's Stage 4 or 5 2 With the pre-extraction variables obtained by factor analysis, it was possible to predict the long axis of the lower 3rd molars after 2nd molar extraction. 3 There were no impacted 3rd molars.

• Journal of the Korean Chemical Society
• /
• v.60 no.6
• /
• pp.415-427
• /
• 2016

This study analyzed the attributes of the conceptions of $3^{rd}$ to $6^{th}$ grade elementary school students on three states of matter and investigated the characteristics of the classified results of various examples of matter by grades. Through discussion activities, we confirmed the stabilization of conception attributions. For this study, 113 participants from two $3^{rd}$ to $6^{th}$ grade elementary school classes were selected. The concentration analysis (C-factor) and normalized gain (G-factor) of the conceptions for the quantitative analysis of the conception changes were used. The elementary school students retained different percentages of the attributes for states of matter. The characteristic of the grades were different between the 3rd grade and other grades. Based on these results, we pointed out the problems with the present teaching methods in science textbooks and stated the advantages of the effects of the representation of mixtures.

• Proceedings of the Korean Society of Sericultural Science Conference
• /
• 2003.10a
• /
• pp.97-98
• /
• 2003

Current study was aimed to understand an interaction between Dopa decarboxylase (DDC) and proteins that specifically binds to DDC in the silkworm, Bombyx mori. Materials and Methods: Materials-Animal: Bombyx mori Construction of GST fusion protein Preparation of lysates: Protein extracted from whole body of Bombyx mori Methods-In vitro binding assay with lysates, Peptide sequence and RACE-PCR (omitted)

• Proceedings of the Korean Society of Sericultural Science Conference
• /
• 2003.10a
• /
• pp.93-94
• /
• 2003

To understand the molecular mechanism of diapause determination and termination during embyogenesis of the silkworm, Bombyx mori, mRNA from maintained or activated eggs of diapause was compared using differential expression. (omitted)

• Proceedings of the Korean Society of Sericultural Science Conference
• /
• 2003.10a
• /
• pp.91-92
• /
• 2003

For studies of unfolded protein response (UPR), we isolated differentially expressed genes in Bm5 cell line induced with treatment of tunicamycin, the synthesis inhibitor of N-linked oligosaccharides in cells and constructed the subtractive cDNA library enriching UPR-related genes. (omitted)

• Proceedings of the Korean Society of Sericultural Science Conference
• /
• 2003.10a
• /
• pp.76-76
• /
• 2003

We describe here the identification of a transcription factor, ATFC that regulates the UPR by binding to the UPRE only when the signaling pathway is activated. The data in this study cover the first set of results, showing that ATFC has a major role in the insect UPR. (omitted)

• Proceedings of the Korean Society of Sericultural Science Conference
• /
• 2003.10a
• /
• pp.155-156
• /
• 2003

The Coleoptera is one of the most species-rich order of animals, adapted to most terrestrial and freshwater aquatic habitats. Among them, the mulberry longicom beetle, Apriona germari Hope, is widely distributed in eastern Asia and became one of the major pests of mulberry tree in Korea. To obtain genetic information on the mulberry longicorm beetle, we have constructed cDNA library from the larvae whole-body. Here, we report Apriona germari ESTs profiles determined the 5'most end of 3072 clones. (omitted)

• Proceedings of the Korean Society of Sericultural Science Conference
• /
• 2003.10a
• /
• pp.149-150
• /
• 2003

The purpose of this experiment is to optimize the yield of the recombinant Cox2 from the stably transformed Drosophila melanogaster S2 cells, using dimethylsulfoxide and sodium butyrale. Materials and Methods : Materials - Cell line : Drosophila melanogaster Schneider 2 (S2) cells - vector pMT/BiP/V5-His and pCoHygro (Invitrogen) (omitted)