• 한국지반공학회논문집
• /
• 제21권4호
• /
• pp.145-154
• /
• 2005

러브파와 레일리파는 표면파로서 각 파가 가지는 분산특성을 활용하여 지반의 강성주상도를 파악할 수 있는 특징을 가지고 있다. 이 중 러브파는 한 방향에 대한 응력-변위만 고려하면 되기 때문에 수치적 모델링이 간단하다. 전파시에는 이론적으로 체적파의 영향 및 밀도의 변화가 없어 각 각의 물성치를 갖는 다층구조지반에서 적용성이 높다고 할 수 있다. 이러한 장점을 활용하여 최종적으로는 단파장에 유리한 러브파와 장파장에 유리한 레일리파의 분산정보를 같이 이용하여 동시역산해석을 할 수 있는 기법을 제안하고자 한다. 해석기법은 크게 3가지로 구성되는데, 러브파와 레일리파의 정모델링 해석을 위해 전달행렬법의 구성, 대상 지반의 시스템 결정을 위한 민감도행렬의 구성 그리고 역산해석기법인 Damped Least Square Solution (DLSS)이다. 동시역산의 방법은 민감도행렬을 구성할 때 레일리파와 러브파의 분산정보가 동시에 사용되며, 계산된 민감도행렬을 역산해석하여 지반의 전단파 주상도를 반복적으로 계산하게 된다. 동시역산해석의 목적은 각 파의 주파수 기여도가 다른 점을 활용함으로서 역산결과의 정확도와 수렴도를 향상하고자 함이다.

• 설비공학논문집
• /
• 제13권3호
• /
• pp.145-152
• /
• 2001

Low Rayleigh number thermal convection in a fluid layer confined between two-infinite horizontal walls kept at spatially sinusoidal temperature distributions, T_L=T_m+\Delta T\sin \kappax,\;T_U=T_m+\Delta T\sin(\kappax-\beta)$, is theoretically investigated by a regular perturbation expansion method. For small wave numbers, an upright cell is formed between the two walls at $\beta$=0. The cell is tilted, as the phase difference increases, and a flow with tow counter-rotating eddies occurs at $\beta=\pi$. when the wave number is large, isolated eddies are formed near the lower and upper walls, for all the phase differences. There exists a wave number at which maximum heat transfer rate at the walls occurs, at each of the phase differences. And the wave number increases with increase of the phase difference. for a fixed wave number, the heat transfer rate decrease with increase of the phase difference.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.97-103
• /
• 2006

A modified one-sided measurement technique is proposed for Rayleigh wave (R-wave) velocity measurement in concrete. The scattering from heterogeneity may affect the waveforms of R-waves in concrete, which may make the R-waves dispersive. Conventional one-sided techniques do not consider the scattering dispersion of R-waves in concrete. In this study, the maximum energy arrival concept is adopted to determine the wave velocity by employing its continuous wavelet transform. Experimental study was performed to show the effectiveness of the proposed method. The present method is applied to monitor the strength development of early-age concrete. A series of experiments were performed on early-age concrete specimens with various curing conditions. Results reveal that the proposed method can be effectively used to measure the R-wave velocity in concrete structures and to monitor the strength development of early-age concrete.

• Geomechanics and Engineering
• /
• 제13권5호
• /
• pp.775-791
• /
• 2017

Surface wave techniques are widely used as non-invasive method for geotechnical site characterization. Field surface wave data are collected and analyzed using different processing techniques to generate the dispersion curves, which are further used to extract the shear wave velocity profile by inverse problem solution. Characteristics of a dispersion curve depend on the subsurface layering information of a vertically heterogeneous medium. Sometimes soft layer can be found between two stiff layers in the vertically heterogeneous media, and it can affect the wave propagation dramatically. Now most of the surface wave techniques use the fundamental mode Rayleigh wave propagation during the inversion, but this may not be the actual scenario when a soft layer is present in a vertically layered medium. This paper presents a detailed and comprehensive study using finite element method to examine the effect of soft layers which sometimes get trapped between two high velocity layers. Determination of the presence of a soft layer is quite important for proper mechanical characterization of a soil deposit. Present analysis shows that the thickness and position of the trapped soft layer highly influence the dispersion of Rayleigh waves while the higher modes also contribute in the resulting wave propagation.

• 비파괴검사학회지
• /
• 제37권1호
• /
• pp.29-36
• /
• 2017

최근 KTX (Korean Train Express) 열차의 사고의 대부분은 기기의 오작동, 차량 부품의 노후와에 따른 고장 및 장애발생, 신호장치에 대한 인적오류 등이 주된 원인이였다. 특히, 차량부품 중 제동 디스크의 파손은 하부 차축 및 차륜에 충격을 가해 탈선의 우려와 고속 충돌 등 대형 인명 피해를 낳을 수 있다. 따라서 본 연구에서 KTX의 제동 디스크(Solid Type, Ventilation Type)를 형상화하고, 이를 동작시켜 균열을 측정하여 DB화 할 수 있는 균열검측시스템을 구축하였다. 제동 디스크의 표면균열을 검사하기 위하여 Rayleigh wave를 이용하였으며 수침기법으로는 제동디스크 장착상태에서 탐상의 어려움이 인하여 국부수침 탐상기법을 활용하여 제동디스크의 초음파 검사모듈을 개발하였다. 또한 제동디스크의 회전에 따라 측정된 균열을 저장할 수 있는 균열검측 자동화장치와 제동 디스크의 초음파 검사모듈을 이용하여 제동 디스크의 표면결함을 평가하였다.

• International Journal of Reliability and Applications
• /
• 제5권1호
• /
• pp.1-13
• /
• 2004

It is recently well recognized that the technique for the one-sided stress wave velocity measurement in structural materials provides measurement in structural materials provides valuable information on the state of the material such as quality, uniformity, location of cracked or damaged area. This technique is especially effective to measure velocities of longitudinal and Rayleigh waves when access to only one surface of structure is possible. However, one of problems for one-sided stress wave velocity measurement is to get consistent and reliable source for the generation of elastic wave. In this study, the laser based surface elastic wave was used to provide consistent and reliable source for the generation of elastic wave into the materials. The velocities of creeping wave and Rayleigh wave in materials were measured by the one-sided technique using laser based surface elastic wave. These wave velocities were compared with bulk wave velocities such as longitudinal wave and shear wave velocities to certify accuracy of measurement. In addition, the mechanical properties such as poisson's ratio and specific modulus(E/p) were calculated with the velocities of surface elastic waves.

• 한국철도학회논문집
• /
• 제7권4호
• /
• pp.391-399
• /
• 2004

This paper investigated the dispersion characteristics of horizontal surface waves as means to apply conversional SASW techniques. To verify this proposal, 3D finite element analysis and Transfer matrix solution were performed. SH wave(Love waves) has the some advantages in comparison with Rayleigh wave. Representatively, Love wave has a characteristics not affected by compression wave. These characteristics have the robust applicability for the surface wave investigation techniques. In this study, for the purpose of employing Love wave in the SASW method, the dispersion characteristics of the Love wave was extensively investigated by the theoretical and numerical approaches. The 3-D finite element and transfer matrix analyses for the half space and two-layer systems were performed to determine the phase velocities from Love wave as well as from both the vertical and the horizontal components of Rayleigh wave. Preliminary, numerical simulations and theoretical solutions indicated that the dispersion characteristics of horizontal surface wave(Love waves) can be sufficiently sensitive and appliable to SASW techniques.

• Coupled systems mechanics
• /
• 제12권4호
• /
• pp.337-364
• /
• 2023

The Rayleigh wave propagation is considered in the structure of the functionally graded piezoelectric material (FGPM) layer over the elastic substrate. The elastic substrate loosely bonds the layer through a corrugated interface, whereas its upper boundary is also corrugated but stress-free. Additionally, the solutions for the FGPM layer and substrate are derived using the fundamental variable separable approach to convert the partial differential equation to an ordinary differential equation. The results with boundary conditions lead to dispersion relations for the electrically open and electrically short cases in the determinant form. The outcomes have been numerically analyzed using a specific model. The findings were presented in the form of graphs, which were created using Mathematica 7. Graphs are plotted for variations in wavenumber and phase velocity. The outcomes may help measure interface defects and design Surface Acoustic Wave (SAW) devices.

• Geomechanics and Engineering
• /
• 제10권2호
• /
• pp.137-154
• /
• 2016

The purpose of this paper is to study the propagation of Rayleigh waves in an anisotropic heterogeneous crustal layer over a gravitational semi-infinite sandy substratum. It is assumed that the heterogeneity in the crustal layer arises due to exponential variation in elastic coefficients and density whereas the semi-infinite sandy substratum has homogeneous sandiness parameters. The coupled effects of heterogeneity, anisotropy, sandiness parameters and gravity on Rayleigh waves are discussed analytically as well as numerically. The dispersion relation is obtained in determinant form. The proposed model is solved to obtain the different dispersion relations for the Rayleigh wave in the elastic medium of different properties. The results presented in this study may be attractive and useful for mathematicians, seismologists and geologists.

• 물과 미래
• /
• 제22권4호
• /
• pp.441-451
• /
• 1989

한반도 주변해상에 큰 영향을 미친 태풍 LEE, VERA, THELMA 통과시의 파랑관측 자료에 대하여 zero-up & down crossing법 및 Tucker-Draper법으로 구한 유의파고를 파랑스펙트럼법으로 구한 유의파고와 비교분석하였다. 그리고 zero-up crossing법으로 구한 개별파의 파고분포를 Rayleigh, Weibull, Gluhovski, Ibrageemov, Goda의 분포와 비교한 후 Chi-square 검증을 실시하였다. 분석결과 zero-crossing법으로 구한 유의파고가 스펙트럼에서 구한 유의파고와 가장 잘 일치하였으며, 파고분포는 Rayleigh와 Goda 분포가 관측치에 가장 잘 맞는 것으로 나타났다.