• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.240-244
• /
• 2005

In this study a simple model is developed that predicts impact damage in a composite laminate using an analytical model. The model uses a non-linear approximation method (Rayleigh-Ritz) and the large deflection plate theory to predict the number of failed plies and damage area in a quasi-isotropic composite circular plate (axisymmetric problem) due to a point impact load at its centre. It is assumed that the deformation due to a static transverse load is similar to that occurred in a low velocity impact. It is found that the model, despite its simplicity, is in good agreement with FEM predictions and experimental data for the deflection of the composite plate and gives a good estimate of the number of failed plies due to fibre breakage. The predicted damage zone could be used with a fracture mechanics model developed by the second investigator and co-workers to calculate the compression after impact strength of such laminates. This approach could save significant running time when compared to FEM solutions.

• 한국소음진동공학회논문집
• /
• 제14권3호
• /
• pp.244-252
• /
• 2004

The theoretical method is developed to investigate the vibration characteristics for the partially fluid-filled continuous cylindrical shells with the intermediate supports. The intermediate supports are simulated by two types of artificial springs : the translational spring for the translation for each direction and the rotational spring for a rotation. The springs are continuously distributed along the circumferential direction. By allowing the spring stiffness to become very high compared to the stiffness of the structure, the rigid intermediate supports are approximated. In the theoretical procedure, the Love's thin shell theory is adopted to formulate the theoretical model. The frequency equation of the continuous cylindrical shell is derived by the Rayleigh-Ritz approach based on the energy method. Comparison and convergence studies are carried out to verify and establish the appropriate number of series term and the artificial spring stiffness to produce results with an acceptable order of accuracy. The effect of intermediate supports, their positions and fluid level on the natural frequencies and mode shapes are studied.

• Structural Engineering and Mechanics
• /
• 제55권2호
• /
• pp.435-459
• /
• 2015

Parametric resonance of shear deformable composite skew plates subjected to non-uniform (parabolic) and linearly varying periodic edge loading is studied for different boundary conditions. The skew plate structural model is based on higher order shear deformation theory (HSDT), which accurately predicts the numerical results for thick skew plate. The total energy functional is derived for the skew plates from total potential energy and kinetic energy of the plate. The strain energy which is the part of total potential energy contains membrane energy, bending energy, additional bending energy due to additional change in curvature and shear energy due to shear deformation, respectively. The total energy functional is solved using Rayleigh-Ritz method in conjunction with boundary characteristics orthonormal polynomials (BCOPs) functions. The orthonormal polynomials are generated for unit square domain using Gram-Schmidt orthogonalization process. Bolotin method is followed to obtain the boundaries of parametric resonance region with higher order approximation. These boundaries are traced by the periodic solution of Mathieu-Hill equations with period T and 2T. Effect of various parameters like skew angle, span-to-thickness ratio, aspect ratio, boundary conditions, static load factor on parametric resonance of skew plate have been investigated. The investigation also includes influence of different types of linearly varying loading and parabolically varying bi-axial loading.

• Steel and Composite Structures
• /
• 제35권3호
• /
• pp.405-413
• /
• 2020

Current study on the buckling analysis of steel plate in composite structures normally focuses on applying finite element method to derive the buckling stress. However, it is time consuming, computationally complicated and tedious for general use in design by civil engineers. Therefore, in this study an analytical study is conducted to predict the buckling behavior of steel plates in composite structures. Hand calculation method was proposed based on energy principle. Novel buckling shapes with biquadratic functions along both loaded and unloaded direction were proposed to satisfy the boundary condition. Explicit solutions for predicting the critical local buckling stress of steel plate is obtained based on the Rayleigh-Ritz approach. The obtained results are compared with both experimental and numerical data. Good agreement has been achieved. Furthermore, the influences of key factors such as aspect ratio, width to thickness ratio, and elastic restraint stiffness on the local buckling performance are comprehensively discussed.

• 한국산학기술학회논문지
• /
• 제7권5호
• /
• pp.793-800
• /
• 2006

곡선보(curved beam)의 회전관성(rotatory inertia) 및 전단변형(shear deformation)을 고려한 평면내(in-plane) 자유진동을 해석하는데 미분구적법(DQM)을 이용하여 고정-고정 경계조건(boundary conditions)과 다양한 굽힘각(opening angles)에 따른 진동수(frequencies)를 계산하였다. DQM의 결과는 엄밀해(exact solution) 또는 다른 수치해석(Rayleigh-Ritz, Galerkin 또는 FEM) 결과와 비교하였으며, DQM은 적은 요소(grid points)를 사용하여 정회한 해석결과를 보여주었다.

• Structural Engineering and Mechanics
• /
• 제19권4호
• /
• pp.401-411
• /
• 2005

The influence of cracks on the elastic deflection and ultimate bearing capacity of eccentric thin-walled columns with both ends pinned was studied in this paper. First, a method was developed and applied to determine the elastic deflection of the eccentric thin-walled columns containing some model-I cracks. A trigonometric series solution of the elastic deflection equation was obtained by the Rayleigh-Ritz energy method. Compared with the solution presented in Okamura (1981), this solution meets the needs of compatibility of deformation and is useful for thin-walled columns. Second, a two-criteria approach to determine the stability factor ${\varphi}$ has been suggested and its analytical formula has been derived. Finally, as an example, box columns with a center through-wall crack were analyzed and calculated. The effects of cracks on both the maximum deflection and the stability coefficient ${\varphi}$ for various crack lengths or eccentricities were illustrated and discussed. The analytical and numerical results of tests on the columns show that the deflection increment caused by the cracks increases with increased crack length or eccentricity, and the critical transition crack length from yielding failure to fracture failure ${\xi}_c$ is found to decrease with an increase of the slenderness ratio or eccentricity.

• 대한토목학회논문집
• /
• 제28권1A호
• /
• pp.125-133
• /
• 2008

사장교의 장대화로 주탑 및 보강형과 더불어 사장 케이블의 동적 안정화에 많은 노력이 요구된다. 사장 케이블에서 동적 불안정은 주로 대칭 1모드와 역대칭 1모드에서 발생되며 대칭 1모드는 역대칭 1모드와 다르게 새그의 영향이 명확하게 나타나므로 기본진동수는 팽팽한 스트링으로부터 얻은 것과 상이한 결과를 제공하게 된다. 이러한 현상에 관해 Irvine, Triantafyllou, 안상섭 등은 해석적 기법을 통해 동적거동 분석을 수행하였다. 이들의 연구는 광범위한 영역의 Irvine Parameter에 대해 중요한 결과를 제시하였으나 특성점(Cross-Over Point 혹은 복합모드 형성점) 이후 영역에 대해서는 상이한 결과를 제시하였고 진동수방정식의 높은 비선형성으로 인해 해가 매우 민감한 난점이 있다. 본 연구는 사장 케이블 동적안정 문제에 주요한 모드들 중 새그의 영향이 가장 높은 대칭 1모드의 기본진동수에 초점을 맞추었으며 일반화된 역학적에너지에 경계조건을 만족시키는 진동형상을 적용하고 Rayleigh-Ritz 방법으로 해석적인 해를 제시하였다. 선행연구들과 다르게 본 연구는 선형적인 해를 제공하며 이에 따른 오차는 특성점 이내에서 3% 미만의 오차를 보였다. 또한, 사장 케이블이나 이에 준한 케이블은 특성점을 넘지 않으므로 공학적으로 충분한 가치를 갖는다고 볼 수 있다. 더불어 대칭 1모드에서 발생되는 갤로핑과 Parametric 공진대역을 분석하여 연구의 활용성을 확인하였다.

• 대한조선학회논문집
• /
• 제32권3호
• /
• pp.116-125
• /
• 1995

선체(船體) 해양구조물(海洋構造物)과 같은 대형(大型) 구조물(構造物)은 대부분 판(板) 구조물(構造物)로 이루어져 있으며, 이에 각종(各種) 기기류(機器類), cable류(類). Pillar, 탄성지지(彈性支待)된 장비(裝備) 등과 같이 집중질량(集中質量), 분포질량(分布質量), 지지(支持)스프링 , 질량(質量)-스프링 계(系) 등이 부가(附加)되는 경우가 많다. 이러한 판(板) 구조물(構造物)의 진동해석(振動解析) 방법(方法)으로 매우 단순(單純)한 경우를 제외하고는 엄밀해(嚴密解)를 얻기 어렵기 때문에 Rayleigh-Ritz방법(方法), assumed mode method와 같은 해석적(解析的) 방법(方法)이 주로 적용(適用)되고 있다. 국부(局部) 팬널의 형상(形狀)은 직사각형(直四角形) 뿐만 아니라 사다리꼴, 삼각형(三角形) 등 매우 다양(多樣)한데 상기(上記) 해석적(解析的) 방법(方法)을 적용한 연구(硏究)는 대부분 직사각형(直四角形)인 경우에 대하여 이루어졌다. 따라서 본(本) 연구(硏究)에서는 임의(任意) 사각형(四角形) 형상(形狀) 평판(平板)에 집중질량(集中質量), Pillar와 같은 지지(支持)스프링, 질량(質量)-스프링 계(系) 등이 부가(附加)된 전체계(全體系)의 진동해석(振動解析)을 효율적(效率的)으로 수행(遂行)하는 방법으로서 임의(任意) 사각형(四角形) 형상(形狀)을 효과적(效果的)으로 취급하기 위해 특성좌표계(特性座標系)를 활용하고 assumed mode method을 적용하는 정식화(定式化)를 제시하였다. 질량(質量)-스프링 계(系)가 부가(附加)된 사다리꼴 평판(平板)을 대상(對象)으로 일련의 수치(數値) 계산(計算)을 수행(遂行)하고 유한요소법(有限要素法)에 의한 결과(結果)와 비교(比較) 검토(檢討)하므로써 본(本) 연구(硏究)에서 제시한 방법(方法)의 타당성(妥當性)을 입증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.565-573
• /
• 2007

This paper is concerned with the dynamic modeling, active vibration controller design and experiments for a cylindrical shell equipped with MFC actuators. The dynamic model was derived by using Rayleigh-Ritz method based on Donnel-Mushtari shell theory. The actuator and sensors for the MFC actuator equations were derived based on pin-force model. The equations of motion were then reduced to modal equations of motion by considering the modes of interest. The sensor equations were also converted to a reduced form. An aluminum shell was fabricated to demonstrate the effectiveness of modeling and control techniques. The boundary conditions at both ends of the shell were assumed to be shear diaphragm. Theoretical natural frequencies were calculated and compared to experimental result. It was observed that the theoretical result is in good agreement with experimental result for the first two modes. The multi-input and multi-output positive position feedback controller, which can cope with first two modes, was then designed based on the blockinverse theory and implemented using DSP. It was found from experiment that vibrations can be successfully suppressed.

• Structural Engineering and Mechanics
• /
• 제46권2호
• /
• pp.153-177
• /
• 2013

Pendulums can be used as passive vibration control devices in several structures and machines. In the present work, the nonlinear behavior of a pendulum-tower system is studied. The tower is modeled as a bar with variable cross-section with concentrated masses. First, the vibration modes and frequencies of the tower are obtained analytically. The primary structure and absorber together constitute a coupled system which is discretized as a two degrees of freedom nonlinear system, using the normalized eigenfunctions and the Rayleigh-Ritz method. The analysis shows the influence of the geometric nonlinearity of the pendulum absorber on the response of the tower. A parametric analysis also shows that, with an appropriate choice of the absorber parameters, a pendulum can decrease the vibration amplitudes of the tower in the main resonance region. The results also show that the pendulum nonlinearity cannot be neglected in this type of problem, leading to multiplicity of solutions, dynamic jumps and instability. In order to improve the effectiveness of the control during the transient response, a hybrid control system is suggested. The added control force is implemented as a non-linear variable stiffness device based on position and velocity feedback. The obtained results show that this strategy of nonlinear control is attractive, has a good potential and can be used to minimize the response of slender structures under various types of excitation.