• Journal of Internet Computing and Services
• /
• v.8 no.2
• /
• pp.23-31
• /
• 2007

If the effort(manpower) and schedule are estimated, there is very difficult to allocate the manpower according to the schedule time units efficiently. Generally, the Putnam's Rayleigh Model has been applied popularly. This distribution model is expressing topology that manpower is consumed concentrically in first-half point. But actual manpower of projects are consumed concentrically at middle or second half point. Therefore, this model cannot be applied in software project planning area. This paper suggests a model to distribute manpower efficiently. Fist of all, we investigate a typical type presenting in software development field and manpower profile type of actuality development projects. Next, we suggested a method to present the model by a drawing a contour about manpower profile for the efficient manpower distribution. The proposed model shows better performance than Rayleigh and Gomma model. By applying proposed model, we will properly distribute manpower to schedule in software development planning phase, and finally we may manage project successfully.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.3
• /
• pp.260-267
• /
• 1992

In this paper, the performance of frequency hopped(FH) M-ary frequency shift keyed(MFSK)system is analyzed with the fading channel and the multione famming. In general, the performance degradation of FH/MFSK system is due to the Rayleigh fading and the multitone jamming environment. In order to improve the system performance. the time diversity is used. When the time diversity is applied to the Rayleigh fading and the mulitone jamming, we get around 18dB and 19dB improvements. respectively. And when it is applied to both the Rayleigh fading and the multitone jamming, we get around 4 dB improvement.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.6
• /
• pp.141-148
• /
• 2009

Space-time block codes (STBC) have no coding gain but they provide a full diversity gain with relatively low encoder/decoder complexity. Therefore, STBC should be concatenated with an outer code which provides an additional coding gain. In this paper, we consider the concatenation of multiple trellis-coded modulation (MTCM) codes with STBC for achieving significant coding gain with full antenna diversity. Using criteria of equal transmit power, spectral efficiency and the number of trellis states, the performance of concatenated scheme is compared to that of previously known space-time trellis codes (STTC) in terms of frame error rate (FER). Simulation results show that MTCM codes concatenated with STBC offer better performance on fast Rayleigh fading channels, than previously known STTC with two transmit antennas and one receive antenna.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.8
• /
• pp.1485-1492
• /
• 1992

While the vibration of circular plates were considered by many researchers, rather less attention is given to elliptical plates. In the present paper, the Rayleigh-Ritz mothod is used to obtain an eigenvalue equation for the free flexural vibration of thin elliptical plates having the classical free, simply suported or clmped boundary condition. Circular plates are included as a special case of the elliptical plates. Products of simple polynomials are used as the admissible functions and a recurrence relationship facilitates the evaluation of the necessary integrals. The analysis is developed for rectilinear orthotropic plates but the numerical results are given for isotropic plates with various aspect ratios.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.6
• /
• pp.1066-1072
• /
• 2001

ALOHA Multi-Carrier DS-CDMA systems in the multipath Rayleigh fading channel. The throughput of two systems are compared according to the length of a packet in the fast Rayleigh and the slow Rayleigh multipath fading. As a result, we have known that Multi-Carrier DS-CDMA system has less capacity than wideband DS-CDMA system in the same bandwidth, but throughput of Multi-Carrier DS-CDMA system is higher than that of wideband DS-CDMA system. And in Multi-Carrier DS-CDMA systems, higher throughput can be obtained through shortening the length of packet in the fast Rayleigh fading, and it is efficient to control the length of a packet adequately or increase the system capacity of Multi-Carrier DS-CDMA system in the slow Rayleigh fading.

• Geophysics and Geophysical Exploration
• /
• v.9 no.2
• /
• pp.148-154
• /
• 2006

The effect of small-scale near surface inhomogeneity on Rayleigh wave propagation and dispersion has been investigated in this study using two-dimensional FEM elastic modeling. Various inhomogeneity models with a variety of geometrical shape and embedment depth which exist in homogeneous half-space and two-layered media are considered. Results show that any near surface inhomogeneity greater than one wavelength in terms of minimum wavelength of Rayleigh wave shows dispersion characteristics. Such dispersion effect become stronger as the dimensions of the inhomogeneity increase. The effect of horizontal dimension is more dominant factor governing the dispersion characteristics than vertical dimension. However, the dispersion effect can not be identifiable in seismogram if the horizontal dimension is not wide enough. Nonetheless, even in this case, the existence of inhomogeneity can be inferred by the reflection or transmission event of Rayleigh wave. The results can be expected to provide insights on the behavior of Rayleigh wave which may be helpful for designating field work or new processing scheme to detect near surface inhomogeneity by surface wave method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.675-679
• /
• 2001

In this paper, throughput is derived for slotted ALOHA wideband DS-CDMA and slotted ALOHA Multi-Carrier DS-CDMA systems in the multipath Rayleigh fading channel. The throughput of two systems are compared according to the length of a packet in the fast Rayleigh and the slow Rayleigh multipath fading. As a result, we have known that Multi-Carrier DS-CDMA system has less capacity than wideband DS-CDMA system in the same bandwidth, but throughput of Multi-Carrier DS-CDMA system is higher than that of wideband DS-CDMA system. And in Multi-Carrier DS-CDMA systems, higher throughput can be obtained through shortening the length of packet in the fast Rayleigh fading and it is efficient to control the length of a packet adequately or increase the system capacity of Multi-Carrier DS-CDMA system in the slow Rayleigh fading.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.641-646
• /
• 2016

Soot particles generated by fossil fuel combustion normally have fractal morphology with aggregates consisting of small spherical particles. Thus, Rayleigh or Mie elastic light scattering theory is not feasible for determining the fractal properties of soot aggregates. This paper describes a detailed process for applying Rayleigh-Debye Gans (RDG) scattering theory to effectively extract the morphological properties of any nano-scale particles. The fractal geometry of soot aggregates produced from an isooctane diffusion flame was observed using ex situ transmission electron microscopy (TEM) after thermophoretic sampling. RDG scattering theory was then used to analyze their fractal morphology, and various properties were calculated, such as the diameter of individual soot particles, number density, and volume fraction. The results show indiscernible changes during the soot growth process, but a distinct decreasing trend was observed in the soot oxidation process. The fractal dimension of the soot aggregates was determined to be around 1.82, which is in good agreement with that produced for other types of fuel. Thus, it can be concluded that the value of the fractal dimension is independent of the fuel type.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.12
• /
• pp.1113-1120
• /
• 2013

A numerical analysis of the effect of the position of a circular cylinder in a $45^{\circ}$ tilted enclosure on natural convection in the enclosure is presented. The location of the cylinder is changed between -0.4 and 0.4. The Rayleigh number is varied between $10^3$ and $10^5$. The effect of the location of the cylinder on natural convection in the enclosure is analyzed by the isothermal line, stream line, and surface-averaged Nusselt number. The flow and heat transfer characteristics are independent of time in the range of the Rayleigh number and cylinder location that is considered in this study. The surface-averaged Nusselt number of the cylinder and enclosure increases as the cylinder gets closer to the wall of the enclosure.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.8
• /
• pp.739-747
• /
• 2010

Numerical calculations are carried out for evaluating the natural convection induced by the temperature difference between a hot inner circular cylinder and a cold outer square enclosure. A two-dimensional solution for unsteady natural convection is obtained by using the finite volume method to model an inner circular cylinder that was designed by using the immersed boundary method (IBM) for a Rayleigh number of $10^7$. In this study, we investigate the effect of the location ($\delta$) of the inner cylinder, which is located along the vertical central axis of the outer enclosure, on the heat transfer and fluid flow. The natural convection changes from unsteady to steady state depending on the $\delta$. The two critical lower bound and upper bound positions are ${\delta}_{C,L}$ = 0.05 and ${\delta}_{C,U}$ = 0.18, respectively. Within these defined bounds, the thermal and flow fields are in steady state.