• 한국전자파학회논문지
• /
• 제10권1호
• /
• pp.133-141
• /
• 1999

본 논문에서는 광선추적기법에 근거한 3차원 실내 전파전파 예측모델을 제시한다. 본 모텔은 건물 실내에 산재되어 있는 가구, 집기 등의 모든 장애물을 고려하는 것 대선에 벽과 천장, 바닥 등의 대표적인 전파 장애 불만을 유한 두께와 유한 전도도를 갖는 슬랩으로 모댈링하여, 주요 전파현상을 고려함으로써 간결하면서도 정확하게 전파손실을 예측할 수 있는 모텔이다. 전파 광선들은 장애물과 부딪히면 거울 같은 반사와 투과를 하고 또 모서리에서는 회절되어 전파하는 것으로 고려되었다. 평연 장애물에서의 반사 및 투과 손실은 광선 추적기법을 사용하여 계산하였으며, 모서리에서의 회절손실은 유한 전도도 매질에 대한 UTD를 사용하여 계 산하였다 본 예측모델을 사용한 몇 경우에 대한 경로손실의 시율레이션 결과는 실측치와 잘 일치하는 것을 보여준다.

• 한국음향학회지
• /
• 제24권6호
• /
• pp.334-342
• /
• 2005

본 논문에서는 지난 2004년 동해에서 수행된 MAPLE 04 실험에서 수집된 일련의 전구음원 신호 중 일부를 이용하여 시간 영역에서 지음향 인자 역산을 수행하였다. 이를 위해 수직선배열을 통해 수집된 채널 별 신호 파형과 모의 신호 파형을 직접 비교하는 형태의 목적함수를 구성하였다. 모의 신호는 음선 이론을 사용하여 모델링하였고, 광역최적화 알고리즘인 VFSA (very fast simulated annealing)를 사용하여 목적함수를 최적화하였다 기존의 전달손실비교를 통한 역산 결과(음향학회지 본 호 게재)들과 비교하여 지음향 인자들이 일관성 있게 추정되었음을 확인하였으며, 이 역산 결과를 이용하여 얻은 모의 신호와 계측 신호 간 비교 그림을 제시하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.606-611
• /
• 2000

It has been noted that the low frequency absorption coefficient of a porous sample placed in a standing wave tube is affected by the nature of the sample's edge constraint. The edge constraint has the effect of stiffening the solid phase of the sample, which itself can be strongly coupled to the material's fluid phase, and hence the incident sound field, by viscous means at low frequencies. In recent work it has also been shown that such a circumferential constraint causes the low frequency transmission loss of a layer of fibrous material to approach a finite low frequency limit that is proportional to the flow resistance of the layer and which is substantially higher than that of an unconstrained sample of the same material. However, it was also found that the benefit of the circumferential edge constraint was reduced in a transitional frequency range by a shearing resonance of the sample. Here it will be shown that the effect of that resonance can be mitigated or eliminated by adding additional axial and radial constraints running through the sample. It will also be shown that the constraint effect can be modeled closely by using a finite element procedure based on the Biot poroelastic theory. Implications for low frequency barrier design are also discussed.

• Journal of Welding and Joining
• /
• 제23권2호
• /
• pp.81-89
• /
• 2005

A numerical model for multiple reflection effects of a polarized beam on laser grooving has been developed. The surface of the treated material is assumed to reflect laser irradiation in a fully specular fashion. Combining electromagnetic wave theory with Fresnel's relation, the reflective behavior of a groove surface can be obtained as well as the change of the polarization status in the reflected wave field. The material surface is divided into a number of rectangular patches using a bicubic surface representation method. The net radiative flux far these patch elements is obtained by standard ray tracing methods. The changing state of polarization of the electric field after reflection was included in the ray tracing method. The resulting radiative flux is combined with a set of three-dimensional conduction equations governing conduction losses into the medium, and the resulting groove shape and depth are found through iterative procedures. It is observed that reflections of a polarized beam play an important role not only in increasing the material removal rate but also in forming different final groove shapes. Comparison with available experimental results for silicon nitride shows good agreement for the qualitative trends of the dependence of groove shapes on the electric field vector orientation.

• Bulletin of the Korean Chemical Society
• /
• 제30권5호
• /
• pp.1021-1025
• /
• 2009

A novel supramolecular network containing binuclear copper unit $[Cu(phen)_{2}({\mu}-ID\;A)Cu(phen){\cdot}(NO_{3})](NO_{3}){\cdot}4(H_{2}O)$ (1) was synthesized through the self-assembly of iminodiacetic acid ($H_2IDA$) and 1,10-phenanthroline (phen) in the condition of pH = 6. It has been characterized by the infrared (IR) spectroscopy, elemental analysis, single crystal X-ray diffraction, and thermogravimetric analysis (TGA). 1 shows a 2-D supramolecular structure assembled through strong and unique $\pi-\pi$ packing interactions. Density functional theory (DFT) calculations show that theoretical optimized structures can well reproduce the experimental structure. The TGA and powder X-ray diffraction (PXRD) curves indicate that the complex 1 can maintain the structural integrity even at the loss of free water molecules. The magnetic property is also reported in this paper.

• 한국군사과학기술학회지
• /
• 제13권5호
• /
• pp.725-733
• /
• 2010

A simulator is proposed in this paper for predicting the RF signal level after propagating over sea and land surfaces. Various sea and land types and transmit/receive antenna patterns, as well as the locus of the transmit antenna, are considered for this simulator. At first, microwave reflection characteristics of various sea surfaces have been computed, based on an empirical formula which is developed in this study for the relation between the sea surface roughness and wind speed. Then, microwave reflections from land surfaces such as forests, agricultural areas, and bare surfaces, are computed using the first-order vector radiative transfer theory. Finally, the signal paths over sea and land surfaces are found using the ray tracing technique and the digital elevation model, and the signal level received by a receiving antenna is computed by the using the reflection coefficients of sea and land surfaces and the signal paths.

• 지구물리와물리탐사
• /
• 제22권3호
• /
• pp.149-159
• /
• 2019

암석구성성분검층(중성자-감마스펙트로스코피검층)은 중성자선원의 비탄성산란과 중성자포획 작용으로부터 생성되는 감마선을 측정하여 지층의 원위치 광물조성을 추정할 수 있는 기술이다. 일반적으로 지층의 광물조성 평가는 코어에 대한 X선 회절법, X선 형광분석법 등의 실내 시험자료를 주로 이용하고 있으나 이는 조사 구간의 극히 일부분에 대한 결과이며 특히, 유체의 유동 경로 구간은 주로 파쇄대 및 사질층인데 이 구간들의 코어 회수율이 불량하여 조사 구간 전체에 대한 광물조성 평가는 한계가 있다. 따라서 시추공 전 구간에 대한 원위치 광물조성 추정 기술개발은 지중환경 평가에 중요한 역할을 할 수 있다. 이 기술은 전통, 비전통 저류층 평가를 중심으로 최근까지 장비 개발 및 관련 연구가 활발히 진행되고 있는 분야이지만 몇 개 서비스회사의 독점기술로 자세한 정보 미공개, 다양한 지층 및 인공모형을 이용한 화학-광물학 데이터베이스 구축 문제 등으로 국내 연구에 직접적으로 적용하기에는 어려움이 있었다. 이 해설논문에서는 암석구성성분검층의 기본원리, 시스템 구성, 교정시설, 국외 기 개발된 검층시스템 분석 및 연구개발 동향 등을 통해 해당 기술을 소개하고, 국내 시스템 제작을 위한 기술 적용 방안을 검토하였다.

• 한국실내디자인학회논문집
• /
• 제22권6호
• /
• pp.40-48
• /
• 2013

Utilization of CCTV in crime prevention for public safety is accepted as the most effective measure in terms of crime prevention and control. Also, it is frequently used as a device that shows evidence of an unexpected situation or record on public social relationship. However, it is rare to find a study that qualitatively accessed the monitoring performance of a certain space depending on the choice and positioning of CCTVs. Thus, this study suggested a technology that can quantitatively compare and assess the monitoring performance of CCTVs depending on view angle and effective sight range of cameras as well as the monitoring performance depending on positioning measures. For the analysis, the concept of 3-dimensional surveillance field in the form of a frustum was suggested while deriving 3-dimensional range of sight and quantitative monitoring performance by applying Isovist theory. For the analysis technology, space of analysis subject, point of view (camera), and target point (measurement node) were installed at a 3-dimensional space and in use of ray-tracing algorithm, the line segment that was visually connected between the point of view and target point was extracted and accumulated. For such verification, analysis application was constructed and then applied to four alternative models on view angle and distance as well as four alternatives on positioning in order to verify its efficacy. Through the experiment, it was possible to compare and assess visibility depending on alternatives while quantifying the results by understanding the shadow areas beyond the monitoring range.

• 비파괴검사학회지
• /
• 제16권1호
• /
• pp.19-28
• /
• 1996

본 연구에서는 X선 실시간 영상장치를 이용하여 고체 추진기관과 같은 이질재료 복합구조물의 비파괴시험 조건 최적화 및 관측 가능한 최소 결함의 크기에 대하여 연구하였다. 실험에 사용된 시험편은 모의결함이 다양한 크기와 형상으로 가공된 steel plate였으며, 방사선 등가 원리를 이용하여 추진기관의 고체 추진제, 내열 고무, 연소관을 steel 등가 두께로 환산하여 설치 실험하였다. 실험 결과, 시험 조건 인자인 확대율과 시험 재료의 등가 두께별 적용 에너지 및 조사선량률의 최적값을 구하였으며, 또한 관측 가능한 결함의 크기와 추진제 두께에 따른 결함의 깊이비와의 상관관계를 구하였다. 이와 같이 모사 시험편을 이용한 모의실험은 대상 시험물을 검사하기 전 수행되어야 할 예비 과정이며, 모든 이질재료 복합구조물의 비파괴시험에 적용할 수 있는 것으로 판단된다.

• Smart Structures and Systems
• /
• 제8권1호
• /
• pp.17-37
• /
• 2011

The microcantilever (MCL) sensor is one of the most promising platforms for next-generation label-free biosensing applications. It outperforms conventional label-free detection methods in terms of portability and parallelization. In this paper, an overview of recent advances in our understanding of the coupling between biomolecular interactions and MCL responses is given. A dual compact optical MCL sensing platform was built to enable biosensing experiments both in gas-phase environments and in solutions. The thermal bimorph effect was found to be an effective nanomanipulator for the MCL platform calibration. The study of the alkanethiol self-assembly monolayer (SAM) chain length effect revealed that 1-octanethiol ($C_8H_{17}SH$) induced a larger deflection than that from 1-dodecanethiol ($C_{12}H_{25}SH$) in solutions. Using the clinically relevant biomarker C-reactive protein (CRP), we revealed that the analytical sensitivity of the MCL reached a diagnostic level of $1{\sim}500{\mu}g/ml$ within a 7% coefficient of variation. Using grazing incident x-ray diffractometer (GIXRD) analysis, we found that the gold surface was dominated by the (111) crystalline plane. Moreover, using X-ray photoelectron spectroscopy (XPS) analysis, we confirmed that the Au-S covalent bonds occurred in SAM adsorption whereas CRP molecular bindings occurred in protein analysis. First principles density functional theory (DFT) simulations were also used to examine biomolecular adsorption mechanisms. Multiscale modeling was then developed to connect the interactions at the molecular level with the MCL mechanical response. The alkanethiol SAM chain length effect in air was successfully predicted using the multiscale scheme.