• 소성∙가공
• /
• 제18권2호
• /
• pp.128-134
• /
• 2009

The present study covers an integrated simulation method to evaluate optical performance of an aspheric plastic lens by connecting an injection molding analysis with a ray tracing simulation. Traditional ray tracing methods have based on the assumption that the optical properties of a lens are homogeneous throughout the entire volume. This assumption is to a certain extent unrealistic for injection-molded plastic lenses because material properties vary at every point due to the injection molding effects. To take into account the effects of the inhomogeneous optical properties of the molded lens, a numerical scheme is developed to calculate the distribution of refractive index induced from the injection molding process. This index distribution is then reflected onto CODE $V^{(R)}$ simulation and used to calculate ray paths in inhomogeneous media. The proposed tracing scheme is implemented on the tracing of an aspheric lens for a mobile phone camera module.

• 한국정밀공학회지
• /
• 제32권1호
• /
• pp.75-81
• /
• 2015

Modeling and analysis using a ray tracing method for internal defects were described. Reflection and refraction of rays on the interface of defects were modeled using the Harvey model and the Lambertian model. The diffraction on the interface of defects affected the incoming signals and it could evaluate any defects in the matter and its signal would be analyzed with the ray tracing simulation. The simulation results were compared with actual detecting signals and the ray tracing model was shown in good agreement with experimental data. This method has a possibility to be used as wave propagation modeling in non-destructive testing.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(4)
• /
• pp.327-330
• /
• 2002

This paper proposes the simulation algorithm of rear lamp of car using a ray tracing method that models transmission and refraction of light frequently used in computer graphics At first. To reproduce an image accurately. incident on a sight of viewer, we propose the backward ray tracing method based on spectral distribution representing physical characteristics of illuminant and object used in real. We implement the reproduction algorithm of rear lamp image applying the Bouguer-Beer's law to an optical absorptive phenomenon. As the result, more realistic image can be reproduced.

• 디지털콘텐츠학회 논문지
• /
• 제8권4호
• /
• pp.459-465
• /
• 2007

본 논문에서는 다중 벽면 구조의 실내 환경에서 전파의 전달특성을 모델링하기 위해 ray-launching 기반의 광선추적법을 이용한 2차원 ray-tracing 시뮬레이터를 구현하였고, 이를 통해 ray의 전파 경로를 분석하고 평가하였다. 실험 결과, 구현된 광선추적법의 경로 패턴 및 시간지연 분포는 동일한 무선 환경에서 수행된 이전의 실험 결과와 비슷한 결과가 나타남을 확인하였으며, 송수신 거리 및 방사각에 따른 수신반경의 조정이 타당함을 확인하였다. 특히 비가시거리 송수신 환경에서 다중 벽면을 투과한 ray가 반사와 투과를 형성하여 수신기에 도달할 때까지의 ray의 impulse response는 기존 연구의 실험 결과와 대부분 일치하였으며, 송신기에서 발사되는 ray의 방사각을 $1^{\circ}$에서 $7^{\circ}$까지 달리하여 실험한 경우 도출된 channel profile이 서로 유사함을 확인하였다.

• 소성∙가공
• /
• 제16권1호
• /
• pp.25-30
• /
• 2007

The present study covers an integrated simulation method to evaluate optical performance of an aspheric plastic lens by connecting a finite element (FE) analysis of injection molding with a ray tracing simulation. Traditional ray tracing methods have based on the assumption that the optical properties of a lens are homogeneous throughout the entire volume. This assumption is to a certain extent unrealistic for injection-molded plastic lenses because material properties vary at every point due to the injection molding effects. To take into account the effects of the inhomogeneous optical properties of the molded lens, a new.ay tracing scheme is proposed in conjunction with a FE analysis of the injection molding. A numerical scheme is developed to calculate ray paths on every element layer with more realistic information of the refractive indices which can be obtained through the FE analysis. This information is then used to calculate the ray paths based on the FE mesh of which nodal points have unique index values. The proposed tracing scheme is implemented on the tracing of an aspheric lens, and its validity is ascertained through experimental verification.

• 비파괴검사학회지
• /
• 제27권3호
• /
• pp.231-238
• /
• 2007

Ultrasonic inspection of austenitic steel weldments is a truly difficult task due to complicated wave propagation phenomena such as beam skewing, splitting and distortion. In order to understand these phenomena and design proper inspection procedures, simulation is increasingly paid more attention to. This article addresses a ray tracing based approach to determine incident angle and position of optimal wave mode ultrasonic beam for flaw detection in anisotropic and inhomogeneous austenitic steel weldments. Specially, the optimal mode of ultrasonic wave wave is selected by ray tracing simulation, and an optimization approach based on ray tracing and bi-section search is proposed in order to find the ray path connecting two given points in weldments. With help of this approach, the optimal incident angle and position of ultrasonic beam can be determined for a given flaw position.

• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.100-107
• /
• 2005

The present work covers a new ray tracing scheme of an injection-molded plastic lens linked with finite element analysis fur injection molding processes. The traditional ray tracing schemes have been based on the assumption that optical property of the lens is homogeneous throughout the entire volume. However, this assumption is quite unrealistic for injection-molded plastic lenses since material properties vary at every point due to injection molding effects. In order to consider non-homogeneous property of a lens, a modified ray tracing method is proposed in connection with finite element analysis of injection molding. Through the analysis of the injection molding process, the distribution of refractive indices can be obtained. This information is then utilized in the proposed ray tracing scheme based on finite element meshes so as to take into account variation of the refractive indices. The effect of mold temperature is also investigated through finite element analysis, and the relevant optical quality is evaluated through the proposed ray tracing simulation.

• 한국통신학회논문지
• /
• 제38A권12호
• /
• pp.1110-1116
• /
• 2013

3D-ray tracing tool은 신호의 반사, 투과, 그리고 회절까지 고려하여 3차원 공간에서 더욱 정확한 네트워크 성능을 분석하기 위한 소프트웨어이다. 통신표준에서는 통신 자원을 효율적으로 제공하기 위해 소형셀을 포함한 Heterogeneous Networks (HetNets)을 도입하고 있다. 매크로셀에 비해 좁아진 커버리지를 사용하는 소형셀 환경에서는 3D 공간에서 성능분석이 중요해 졌다. 또한 지형구조와 건물의 배치 그리고 3D 빔포밍(beamforming) 기술 등의 사용으로 인해 네트워크 환경이 복잡해지기 때문에 기존의 2차원 수학적 모델들을 이용하여 성능을 분석하기에는 어려움이 따른다. 본 논문에서는 소형셀 네트워크 성능을 더욱 효율적으로 분석하기 위한 3D-ray tracing tool을 활용한 성능평가 방법을 소개한다. 성능평가 결과 기존의 방법보다 3D-ray tracing tool을 활용한 성능평가 방법이 소형셀 환경에서 더욱 적합하다는 결론을 내렸다.

• 한국항공우주학회지
• /
• 제42권6호
• /
• pp.515-521
• /
• 2014

본 논문에서는 Ray-tracing 기법을 이용하여 그레고리안 안테나의 부반사판을 축변환 후 회전하여 급전혼으로 회귀되는 전파를 없애 이득 및 정재파비를 개선 시키고 부반사판의 크기와 전체적인 부피를 줄여 효율적인 구조를 갖는 축변위그레고리안 안테나를 설계하였다. 설계된 급전혼의 방사패턴을 이용하여 급전혼-부반사판-주반사판으로 전달되는 전파의 경로를 추적하여 주반사판 개구면에서의 전계분포를 구하고 이로부터 원거리 복사패턴을 계산하는 프로그램을 작성하여 안테나 성능을 최적화 하였다. 설계된 안테나는 CST와 제작 측정을 통해 계산결과와 비교하여 이득, 빔폭, 방사패턴, 부엽준위, 반사손실이 계산 결과와 매우 유사함을 확인함으로써 Ray-tracing기법에 대한 타당성을 검증하였다.

• 한국전기전자재료학회논문지
• /
• 제27권3호
• /
• pp.162-166
• /
• 2014

We propose an analysis method of an autostereoscopic display system with lenticular lens array using finite ray-tracing method that is verified by the geometrical optics. In the present work, we adopt the cylinder equation for the mathematical expression of the lenticular lens. For the calculation of the direction cosine of the transmitted ray, we first calculate the refracting point at bottom of the lens and the direction cosine of the incident ray that propagating through the lens by the Snell's law, and then apply to finite ray-tracing method. Finally, we obtain the simulation results for the intensity distribution of the ray at optimal viewing distance. From these results, we confirm the realization of 3D image that exists separately according to the viewing position at an optimal viewing distance.