• Journal of the Korean Wood Science and Technology
• /
• 제31권3호
• /
• pp.1-10
• /
• 2003

Shredded waste newspapers, waste acrylic raw fibers, and urea-formaldehyde (UF) adhesives, at 10% by weight on raw material, were used to produce recycled waste paper-waste acrylic raw fiber composite boards in laboratory scale experiments. The physical and mechanical properties of fire retardant treated recycled waste paper-waste acrylic raw fiber composite boards were examined to investigate the possibility of using the composites as internal finishing materials with specific gravities of 0.8 and 1.0, containing 5, 10, 20, and 30(wt.%) of waste acrylic raw fiber and 10, 15, 20, and 25(wt.%) of fire retardant (inorganic chemical, FR-7^®) using the fabricating method used by commercial fiberboard manufacturers. The bending modulus of rupture increased as board density increased, decreased as waste acrylic raw fiber content increased, and also decreased as the fire retardant content increased. Mechanical properties were a little inferior to medium density fiberboard (MDF) or hardboard (HB), but significantly superior to gypsum board (GB) and insulation board (IB). The incombustibility of the fire retardant treated composite board increased on increasing the fire retardant content. The study shows that there is a possibility that composites made of recycled waste paper and waste acrylic raw fiber can be use as fire retardant internal finishing materials.

• 한국재료학회지
• /
• 제12권9호
• /
• pp.706-711
• /
• 2002

High-pure tantalum powder was fabricated through Na reduction process and has been produced by using $K_2$TaF$_{7}$, and KCI, KF for raw material and diluent, respectively. A raw material and diluent were charged at the hestalloy bomb by the weight rate of 1:2, 1:1, 1:0.5 and 1:0.25 each other, investigated properties of morphology, chemical composition and yield and particle size after reduced. Ta metal has been achieved by reduction of $K_2$$TaF_{7}$ 500g with 1% sodium in excess of stoichiometric amount in the charge at a reduction temperature of $850^{\circ}C$ for 3hours. According to amount of the diluent, a formation of the powder doesn't have an effect. The diluent prevented the temperature rising caused from the heat of reaction and it maintained the speed of reducing reaction. But in the mixture ratio of raw material and diluent in the 1 : 2 and 1 : 0.25, an oxide and partially not reacted K were detected. As the amount of diluent increased, the size of tantalum powder decreased. According as raw material and the mixture ratio of diluent change from 1:0.25 to 1:2, the size is decreased from 5$\mu\textrm{m}$ to 1$\mu\textrm{m}$, and a particle size distribution which is below 325 mesh in fined powder increases from 71% to 83%. In the case of average size of Tantalum powder which is the mixture ratio (1:0.5), we would get the Ta powder with grain size about 3$\mu\textrm{m}$, which come close to the average size (2~4$\mu\textrm{m}$) of tantalum powder which is used commonly in the present is Ta powder about 3$\mu\textrm{m}$.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1990년도 춘계공동학술대회논문집; 한국과학기술원; 28 Apr. 1990
• /
• pp.222-244
• /
• 1990

A multi-echelon structure of manufacturing and distribution system in considered, where the raw materials are transformed into a finished good through a number to manufacturing echelons and it is distributed to the lower echelons(retailers, or customers). The raw material, work-in-process, finished good inventory and the distribution costs are unified into one model. The objective is to determine the ordering policy of raw materials, manufacturing lot size, the number of sub-batch and the distribution policy of the finished good which minimize the annual total system cost. A computer program for a heuristic search technique is developed, by which a numerical example is examined.

• 자원리싸이클링
• /
• 제20권6호
• /
• pp.43-49
• /
• 2011

본 연구는 우리나라의 자원생산성(및 원재료 생산성), 물질순환이용율, 디커플링팩터 등의 3가지 지표를 산정하는 것을 통해 국내 경제활동과 자원소비간의 지속가능성을 평가하고 탈물질화 정도를 살펴보았다. 우리나라의 자원생산성은 2000년 1.32백만원/톤에서 2007년 1.61백만원/톤으로 22% 증가하였으며 2000년~2007년간 자원생산성 연평균증가율은 2.88%로 나타났다. 원재료물질투입량은 국내물질소비량(DMC)의 약 73%~76%를 차지하고 있으며, 원재료생산성은 2007년 2.11백만원/톤으로, 2000~2007년간의 연평균증가율은 3%로 나타났다. 배출된 폐기물은 재활용 및 에너지화를 통해 경제계로 순환되는데 국내 물질순환이용율은 2000년 10.9%에서 2007년 15.6%로 증가하였으며, 2000년부터 2007년까지 연평균 5.3% 수준으로 증가하였다. 그러나 전년대비 증가율의 변화율이 점차 감소하고 있는 추세로 나타났다. 또한 우리나라 경제활동과 자원소비량 간의 디커플링이 발생하여 탈물질화로 진행하고 있음을 확인할 수 있었다.

• 한국건축시공학회지
• /
• 제21권1호
• /
• pp.51-59
• /
• 2021

본 연구에서는 아스팔트 매스틱 도막방수재를 구성하는 원료의 종류 및 함량을 조정하여 누유발생 특성을 분석함으로써 원료와 누유발생 간 특정 상관관계를 정량적으로 파악하는 것을 목적으로 하였다. 이를 위해 아스팔트 매스틱 도막방수재의 유·무기계 체질안료인 CA(탄산칼슘)와 ASE(침강방지제) 두 개 원료를 선정하였으며, 입도 및 함량을 변수로 설정하여 배합을 통해 샘플시료를 조성하고 샘플시료별 점도 및 누유안정성(20℃, 40℃) 평가를 진행하였다. 평가결과, 누유안정성 및 점도는 CA 평균입도에 반비례하며, ASE 함량에 비례하는 상관관계가 성립하는 것을 정량적으로 증명하였다. 본 연구결과는 향후 아스팔트 매스틱 도막 방수재의 누유 개선을 위한 배합 연구 시 기초 배합설계의 핵심적인 근거자료로서 활용이 가능할 것으로 판단된다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제8권2호
• /
• pp.106-111
• /
• 2003

A novel carbohydrolase, which is a DXAMase, containing both dextranase and amylase equivalent activities, was purified from Lipomyces starkeyi KSM22. The purified DXAMase was also found to hydrolyze cellobiose, gentiobiose, trehalose and melezitose, while disproportionation reactions were exhibited with various di- and tri-saccharides, such as maltose, isomaltose, gentiobiose, kojibiose, sophorose, panose, maltotriose, and isomaltotriose with various kinds of oligosaccharides produced as acceptor reaction products. Furthermore, the purified DXAMase hydrolyzed raw waxy rice Starch and produced maltodextrin to the extent of 50% as a glucose equivalent.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권2호
• /
• pp.263-270
• /
• 2016

This study was conducted to investigate the effects of raw material ratio on the physicochemical characteristics of emulsion-type pork sausages. Experiment design was divided into 12 treatments, based on protein level (P), fat level (3P, 3.5P, and 4P), and water level (4P+10, 4P+15, 4P+20, and 4P+25). The pH and shear force values were significantly higher in T7 (3.5P fat and 4P+20 water) than those of other treatments. The lightness and redness were greatly reduced by increasing the quantity of water. The treatments containing 3P fat and 4P+20 water had the highest values of cohesiveness, springiness, gumminess, and chewiness. On the whole, when the protein (P) and fat (3P, 3.5P, 4P) levels were fixed, an increase over the appropriate moisture level deteriorated many physicochemical characteristics.

• 시스템엔지니어링학술지
• /
• 제11권1호
• /
• pp.55-65
• /
• 2015

In steel making plant, sampling system for raw material such as iron ore, limestone is necessary for quality control purpose. For the sake of efficiency and productivity, automation of the sampling system is highly desirable. From technical standpoint, the development of the automated system requires multi-disciplinary domain knowledge such as mechanical engineering, industrial engineering, information technology and computer engineering. Up to present time, the development has been mainly carried out by a single domain expert with project manager. The automated system developed in this way caused problems in the final system. This paper suggests a systems engineering approach to the development of automation for raw material sampling plant via a tailored process called Plant Systems Engineering (PSE) Process based on ISO/IEC 15288. Through the PSE process, we could derive right requirements and architecture of the Systems Of Interest (SOI), and we were convinced that the PSE Process can be applied to many other Plant Systems.

• 펄프종이기술
• /
• 제36권1호
• /
• pp.49-60
• /
• 2004

Life Cycle Assessment for the pulp, which is mainly used as the raw material of fine paper, base paper for food packaging and paper cup, has been carried out in this study to consider environmental aspects by quantifying the environmental emission and to evaluate its environmental impact potential. The system boundary was selected from cradle to gate stage(raw material acquisition, transportation of raw material and product manufacturing) of the product. Environmental impact was divided into 8 categories considering Korean situation: abiotic resource depletion, global warming, ozone depletion, acidification, eutrophication, photochemical oxidant creation, ecotoxicity and human toxicity. In Life Cycle Impact Assessment(LCIA) methodology phase, Ecopoint, Eco-indicator 95 and Korean eco-indicator were used and the results carried out by each methodology were compared. The results from this study were also compared with those of foreign study to verify the reliability of the results. The results of the study could be utilized as the basic data for Environmental Management System(EMS), Design for Environment(DfE) and Type III eco-labeling in the paper and paper-related industry.

• 한국환경과학회지
• /
• 제5권6호
• /
• pp.771-778
• /
• 1996

The sediment in the highly contaminated Gamjeon brook was collected, mixed with the raw material of the tile, and then the commercial tile was produced using the mixture. The concentrations of the heavy metals in the mixture-before and after the tile was produced-were analyzed and the effects of the acid solution on the produced tile were examined. The production of the tiles was successful and the result of heavy metal analysis showed that the concentration of Fe was the highest and that of Cd was the lowest The amount of heavy metal in the sediment - the raw material of the tile mixture was more than that of the produced tile. The elution concentration of the heavy metal by the acid solution(pH : 4 - 7) was low and the quality of the produced tile was better than the commercial tile. The result of this study suggested that the contaminated sediment was removed to produce good tiles, therefore the water pollution and soil pollution were reduced.