• Journal of Satellite, Information and Communications
• /
• v.4 no.2
• /
• pp.12-19
• /
• 2009

In the modern UAV systems, the role of radar payload has been increasing with its unique performance of day-and-night operation and see-through capability over hidden obstacles. Contrary to the satellite reconnaissance, UAV is expected to provide high resolution target detection and recognition capability while frequent flight missions would deliver enhanced SAR image and local information over the target area. STK(Satellite Tool Kit) is a professional space-analysis software widely used in all phases of a space system's life cycle. The simulation of STK is efficient and accurate relatively. In this paper, the author attempt to model the UAV operation and measure the expected SAR image quality. STK(Satellite Tool Kit) is employed to analyze UAV operation and produce SAR raw data. A SAR simulator is developed to produce high resolution SAR image for various ground targets.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9A
• /
• pp.717-727
• /
• 2003

The HIPERLAN/2(HIgh PERformance Local Area Network Type2) is one of the wireless LAN standards for providing raw data rates of up to 54 Mbps. The MAC protocol of HIPERLAN/2 is based on TDMA/TDD, and resources in one MAC frame can be allocated dynamically by Access Point(AP). The random channel(RCH) is defined for the purpose of giving a mobile terminal the opportunity to request transmission resources in the uplink MAC frames. It is desirable that the number of RCHs is dynamically adapted by the AP depending on the current traffic situation. Allocation of excessive RCHs may waste radio resources and insufficient RCHs compared to traffic loads may result in many collisions in access attempts. We propose an RCH allocation scheme based on split algorithm in HIPERLAN/2. The simulation and analytic results show that the proposed scheme achieves a higher channel throughput, lower access delay and delay jitter than previously proposed RCH allocation schemes.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.22 no.1
• /
• pp.15-32
• /
• 2020

This study aims to develop contemporary fashion designs from the unique Yao minority costumes and to explore the possibility of developing creative designs by using knitting materials. The research method is based on the cultural clothing and costumes of the Chinese ethnic minority, as well as literature concerning the Yao costumes and photo data to investigate the cultural background and characteristics apparent in Yao costumes. The overall design characteristics of Yao costumes are as follows. First, the shape of Yao costumes are divided into straight-lined short tops with pleated skirts or shorts, or cardigan tops with pants and aprons, or long shirts, pants, and a belt. Each variant of tribal clothing is different. Second, the colors used are mainly black or dark blue, and these are accented by other colors, such as red, orange, yellow, green, blue, and white. Third, the clothing patterns are mainly in plant, animal, natural, geometric, and human, etc. motifs. The most common patterns in daily life are the patterns using geometric shapes, plants, or animals. Using the background of the unique lifestyles of the Yao ethnic minority, this study applied hand knitting and jacquard techniques for a knit fashion design. In order to develop traditional patterns, Yao patterns were entered into an Illustrator and SDS-ONE APEX3-4 was used for simulation. Using wool fibers as the raw material; the knitting machine used a Bird's eye Jacquard technique-10GG. The results of this research and design work were as follows. First, the knitted clothing design using Yao clothing elements has significance for the development and flexible use of ethnic elements in contemporary creative design. Second, the straight cut design using hand-knitted and jacquard-knit fabrics can minimize waste materials and provide more possibilities for sustainable design development. Third, it provides additional methods for the combination of hand-knitting and jacquard knitting fashion design.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.4
• /
• pp.48-56
• /
• 2007

This study was to understand the component that affects the formative beauty and to present the direction of bridge design for improving the image of urban landscape to survey the visual effect and landscape Preference by the change of bridge type. The results of this study are as follows. In the results of image analysis by bridge types, the images of one-arch bridges are unique and interesting, whereas more than two successive arched bridge were harmonize, stable, consecutive and regular. In the case of the arch rib, braced-rib arch bridge was assessed that complicated, diverse and interesting more than solid-rib arch bridge. The results of factor analysis on the psychological factor were classified into three categories: orderliness, aesthetic and symbolism. In the results of analysis on psychological factors by bridge types, the orderliness and symbolism were different in the position of path, and the number of arches, too. In case of arch rib, symbolism was different. In the preference analysis, they showed a sensitive reaction in the background of building. In the results of the relativity preference and psychological factor, according to aesthetic, symbolism and orderliness, there was an effect on the background of building. And, there showed the high effect in order of aesthetic, orderliness and symbolism in the background of mountain and building. This study should be objective raw data of the arch bridge design for improving the urban landscape. In the future, aesthetic variables like colors or textures should be considered for more exact evaluation.

• Journal of Fashion Business
• /
• v.17 no.6
• /
• pp.28-43
• /
• 2013

Recent trends toward the collaborations among various sectors of academia and research areas have brought interests and significances in new activities especially in the fashion and textile areas. One of the collaboration examples is the recent research projects on 3D virtual clothing systems based on the 3D CAD software. The 3D virtual clothing systems provide simulated apparels with high degrees of fidelity in terms of color, texture, and structural details. However, since real fabrics exhibit strong nonlinearity, anisotropy, viscoelasticity, and hysteresis, the 3D virtual clothing systems need fine tuning parameters for the simulation process. In this study, characteristics of silk fabrics, which are woven by using degummed silk and raw silk yarns, are being analyzed and compared. Anisotropic properties may be measured as warp and filling direction properties separately in woven fabrics, such as warp tensile stress or filling bending rigidity. Hysteretic properties may be measured as bending hysteresis or shear hysteresis by using KES measurements. These data provide deformation-force relationships of the fabric specimen. Three-dimensional effects obtained when using these characteristic fabrics are also analyzed. The methods to control the three-dimensional appearance of the sewn fabric specimens when utilizing a programmable microprocessor-based motor device, as prepared in this study, are presented. Based on the physical and mechanical properties measured when using the KES equipment, the property parameters are being into a 3-dimensional virtual digital clothing system, in order to generate a virtual clothing product based on the measured silk fabric properties.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.74-79
• /
• 2014

Conventional ScanSAR mode has been adopted in Envisat or Radarsat and played an important role to acquire wide swath SAR images for environmental surveillance. However, it suffers from the undesirable scalloping effect caused by non-homogeneity of antenna pattern while the image resolution is sacrificed. In recent years, TOPS mode has been suggested and put into use to overcome the disadvantages of the conventional scanning mode. Although TOPS mode is able to produce wide-swath SAR image in a short time interval, it demands highly complicated system design knowledge. In this paper, we present the operation principle of TOPS mode and a full SAR simulation is performed to generate TOPS SAR raw data. Azimuth antenna pattern is modified during TOPS mode operation and it is shown that the undesired scalloping effect is suppressed in the generated SAR image.

• Journal of Korea Water Resources Association
• /
• v.54 no.7
• /
• pp.453-462
• /
• 2021

As the frequency of localized heavy rainfall has increased during recent years, the importance of high-resolution radar data has also increased. This study aims to correct the bias of Dual Polarization radar that still has a spatial and temporal bias. In many studies, various statistical techniques have been attempted to correct the bias of radar rainfall. In this study, the bias correction of the S-band Dual Polarization radar used in flood forecasting of ME was implemented by a Convolutional Autoencoder (CAE) algorithm, which is a type of Convolutional Neural Network (CNN). The CAE model was trained based on radar data sets that have a 10-min temporal resolution for the July 2017 flood event in Cheongju. The results showed that the newly developed CAE model provided improved simulation results in time and space by reducing the bias of raw radar rainfall. Therefore, the CAE model, which learns the spatial relationship between each adjacent grid, can be used for real-time updates of grid-based climate data generated by radar and satellites.

• Journal of Food Hygiene and Safety
• /
• v.35 no.1
• /
• pp.51-59
• /
• 2020

This study evalutated the risk of foodborne illness from Vibrio spp. (Vibrio vulnificus and Vibrio cholerae) through sea squirt consumption. The prevalence of V. vulnificus and V. cholerae in sea squirt was evaluated, and the predictive models to describe the kinetic behavior of the Vibrio in sea squirt were developed. Distribution temperatures and times were collected, and they were fitted to probabilistic distributions to determine the appropriate distributions. The raw data from the Korea National Health and Nutrition Examination Survey 2016 were used to estimate the consumption rates and amount of sea squirt. In the hazard characterization, the Beta-Poisson model for V. vulnificus and V. cholerae infection was used. With the collected data, a simulation model was prepared and it was run with @RISK to estimate probabilities of foodborne illness by pathogenic Vibrio spp. through sea squirt consumption. Among 101 sea squirt samples, there were no V. vulnificus positive samples, but V. cholerae was detected in one sample. The developed predictive models described the fates of Vibrio spp. in sea squirt during distribution and storage, appropriately shown as 0.815-0.907 of R² and 0.28 of RMSE. The consumption rate of sea squirt was 0.26%, and the daily consumption amount was 68.84 g per person. The Beta-Poisson model [P=1-(1+Dose/β)^-α] was selected as a dose-response model. With these data, a simulation model was developed, and the risks of V. vulnificus and V. cholerae foodborne illness from sea squirt consumption were 2.66×10^-15, and 1.02×10^-12, respectively. These results suggest that the risk of pathogenic Vibrio spp. in sea squirt could be considered low in Korea.

• Korean Journal of Remote Sensing
• /
• v.30 no.2
• /
• pp.293-302
• /
• 2014

Radar systems are used in remote sensing mainly as space-borne, airborne and ground-based Synthetic Aperture Radar (SAR), scatterometer and Doppler radar. Those systems are composed of expensive equipments and require expertise and professional skills for operation. Because of the limitation in getting experiences of the radar and SAR systems and its operations in ordinary universities and institutions, it is difficult to learn and exercise essential principles of radar hardware which are essential to understand and develop new application fields. To overcome those difficulties, in this paper, we present the construction and experiment of a low-cost educational radar system based on the blueprints of the MIT Cantenna system. The radar system was operated in three modes. Firstly, the velocity of moving cars was measured in Doppler radar mode. Secondly, the range of two moving targets were measured in radar mode with range resolution. Lastly, 2D images were constructed in GB-SAR mode to enhance the azimuth resolution. Additionally, we simulated the SAR raw data to compare Deramp-FFT and ${\omega}-k$ algorithms and to analyze the effect of antenna positional error for SAR focusing. We expect the system can be further developed into a light-weight SAR system onboard a unmanned aerial vehicle by improving the system with higher sampling frequency, I/Q acquisition, and more stable circuit design.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.1
• /
• pp.98-112
• /
• 2017

Recently, various research has been conducted on the use of a game engine instead of a commercial geographic information system (GIS) engine for the development of 3D GIS. The advantage of the 3D game engine is that it allows developers to develop various modules according to their abilities. In particular, in the area of disasters, a wide range of alternatives for prevention as well as prediction can be presented when new analyses are attempted by combining geographic information and disaster-related information. Furthermore, 3D analysis can be an important factor in analyzing the phenomena occurring in the real 3D world because of the nature of disasters. Therefore, in this study, we tried to develop a visualization module for flood disaster information through a 3D game engine by considering the solutions for cost and manpower problems and the degree of freedom of development. Raw flood data was mapped onto spatial information and interpolation was performed for the natural display of the mapped flood information. Furthermore, we developed a module that intuitively shows dangerous areas to users by generating cumulative information in order to display multidimensional information based on this information. The results of this study are expected to enable various flood information analyses as well as quick response and countermeasures to floods.