• Proceedings of the KOSOMBE Conference
• /
• v.1991 no.11
• /
• pp.142-144
• /
• 1991

In this study, we have developed 64 channel computerized cardiac mapping system using micro-computer for basic research of electrophysiology and electrical propagation in cardiac arrhythmias. The significant problems of this study are the simultaneous acquisition of large amount data at 64 sites, the need of accurate and rapid analysis, and the effective display of the analyzed data. To solve these problems, we made 64 channel signal pre-processing board in order to amplify and filter the raw signals. And the software for cardiac isochronous mapping which were presented immediately via computer-generated graphics has been developed. This system is expected to enable us to study pathophysiology of cardiac arrhythmia and to improve the results of diagnosis and surgical treatment for cardiac arrhythmia.

• Journal of Software Assessment and Valuation
• /
• v.17 no.2
• /
• pp.117-124
• /
• 2021

Livestock behavioral analysis is a factor that has a great influence on livestock health management and agricultural productivity increase. However, most digital devices introduced for behavioral analysis of livestock do not provide raw data and also provide limited analysis results. Such a closed system makes it more difficult to integrate data and build big data, which are essential for the introduction of advanced IT technologies. Therefore, it is necessary to supply farm-scale data collection devices that can be easily used at low cost. This study presents a data collection system for analyzing the behavior of livestock. The system consists of a number of miniature computing units that operate wirelessly, and collects livestock body temperature and acceleration data, location information, and livestock environment data. In addition, this study presents an algorithm for estimating the behavior of livestock based on the collected acceleration data. For the experiment, a system was built in a Korean cattle farm in Icheon, Gyeonggi-do, and data were collected for 20 Korean cattle, and based on this, the empirical and analysis results were presented.

• IE interfaces
• /
• v.17 no.4
• /
• pp.397-406
• /
• 2004

It is widely known that labor costs are continuously and rapidly growing in terms of the raw cost of products in Korea. The increased labor costs are degrading the competitiveness of dairy industry sector as in the other major industrial fields. Furthermore, the number of dairy farms is constantly decreasing while that of dairy cattle is increasing. Thus, mechanized and/or automated stockbreeding management systems are crucially required to support professional stockbreeding management, as well as to enhance the productivity of the sector. Hence this paper develops an IIS (Integrated Information System) for dairy cattle stockbreeding management. IIS is composed of five application modules and associated utility programs. The five modules are individual stock management, milking management, feeding management, propagation management, and disease management. The utility programs are involved in stock farm accounting, and handy unloading of individual stock data into a personal data acquisition device. Compared with existing foreign products, the developed system takes advantages of various stock body measurement data such as body weight, body temperature, milk conductivity, milking amount, and the number of walking steps. All the measured data are transmitted into a programmable logic controller that monitors and controls measurement devices. The transmitted data are finally aggregated into an integrated database located in the main personal computer. The integrated data are analyzed and reformed in the five modules of IIS, then, used for providing farmers with various farm states and information through application module scenes. Hence, IIS keeps the each module work in a systematic and compatible manner, while supervising the whole stockbreeding management system.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.8-16
• /
• 2009

The holistic inversion approach for frequency domain airborne electromagnetic data has previously been employed to simultaneously calibrate, process and invert raw frequency-domain data where prior information was available. Analternative formulation has been developed, which is suitable in the case where explicit prior information is not available. It incorporates: a multi-layer vertically-smooth conductivity model; a simplified bias parameterisation; horizontal smoothing with respect to elevation; and cluster computer parallelisation. Without using any prior data, an inversion of 8.0 million data for 3.4 million parameters yields results that are consistent with independently derived calibration parameters, downhole logs and groundwater elevation data. We conclude that the success of the holistic inversion method is not dependent on a sophisticated conceptual model or the direct inclusion of survey-area specific prior information. In addition, acquisition costs could potentially be reduced by employing the holistic approach which largely eliminates the need for high altitude zero-level measurements.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.1
• /
• pp.47-57
• /
• 2002

The intention of this study is to construct the spatial database and to extract attribute data which are able to complete the omitted data in the topographical map or completion map of construction using the image data of various form such as artificial satellite images, aerial photographs, terrestrial photographs and so on. This study used the single frame images only for the raw image data, supposing the case of rigorous photogrammetric method is not available or rapid acquisition of information is need. The extracted spatial and attribute data from the images are used for modifying and updating the database, and for providing visual effect useful for guide and management of the facilities. This study intended to develop the technique able to apply in the case where comparative high accuracy is not required or rapid modification is necessary, and to verify the possibility of editing and updating the digital map using the photographs or video images remained as old data. Many of previous research on the management system for university facility has been accomplished focusing on the design and construction of database itself. Otherwise, this study aimed for the construction of guide and management system based on compiling the digital map of present state using multi-imagery, and the more applicability was intended too.

• Journal of Biosystems Engineering
• /
• v.34 no.1
• /
• pp.15-20
• /
• 2009

This study was conducted to develop a moisture sensor for rapeseed, a bio-diesel material. A typical rapeseed, SUNMANG, was used as a raw material. The rapeseed moisture content sensor consists of three components, such as upper and bottom electrodes, a test material dish, and a fixing housing. To evaluate the performance, a data acquisition system was equipped with the rapeseed moisture sensor, computer, printer, and main board. The findings of this study were: 1) the rapeseed moisture content was inversely proportional to electric resistance, and 2) values of electric resistance were recorded in a range of $10{\sim}100\;M{\Omega}$, depending upon a change of the moisture content. The determination of coefficient ($R^2$) and standard error between rapeseed moisture content and electric resistance were 0.9921 and ${\pm}0.289$, which indicated a highly correlative relationship. The response of rapeseed moisture sensor to temperature change was also observed for further performance test. Satisfying results were obtained, such as the determination of coefficient ($R^2$) of 0.9918, predicted standard error of ${\pm}0.373%$, deviation of 0.103%, measurement error of $0.14{\sim}0.48%$, standard deviation of $0.01{\sim}0.22%$, and measurement time of 28.3 s per point, respectively.

• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.965-973
• /
• 2019

In this paper, Stereo 4K@60fps 360 VR real-time video capture system which consists of video stream capture, video encoding and stitching module is been designed. The system captures stereo 4K@60fps 360 VR video by stitching 6 of 2K@60fps stream which are captured through HDMI interface from 6 cameras in real-time. In video capture phase, video is captured from each camera using multi-thread in real-time. In video encoding phase, raw frame memory transmission and parallel encoding are used to reduce the resource usage in data transmission between video capture and video stitching modules. In video stitching phase, Real-time stitching is secured by stitching calibration preprocessing.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.439-442
• /
• 2005

An airborne radar performance can be sensitive to the variation of the Doppler center frequency and the spectral spread of the ground clutter return due to the radar platform moving and aspect angle of the scanning beam to the target. In this paper, for the performance test of the airborne pulsed Doppler radar system developed, the high-speed radar data acquisition system is implemented for acquiring the raw radar signal in real-time. Based on the various test scenarios from airborne-platform to the moving platform, the various radar target and clutter signals are collected and their spectrum is analyzed for the verification of the radar performance in the real-time flight test environments.

• Ocean and Polar Research
• /
• v.39 no.3
• /
• pp.233-244
• /
• 2017

This study seeks to analyze the needs of biotechnology companies in relation to their entry into the marine biotechnology industry and to discuss the policy implications associated with empirical tasks based on issues raised from empirical results gathered from a survey data of 200 biotechnology companies in Korea. This study made a comparison between marine and non-marine biotechnology companies and analyzed non-marine biotechnology companies' needs related to their entry into the marine biotechnology companies by using Social Network Analysis (SNA). Empirical results indicate that 23.5% of biotechnology companies produce goods using marine bio-resources. Once the utility of marine bio-resources is established, 58.8% of non-marine biotechnology companies intend to enter the marine biotechnology industry. This study also shows that non-marine biotechnology companies need technical support, information sharing, and the acquisition of raw materials to enter the marine biotechnology industry. The findings in this study provide important pointers for the direction of policies and future research in the area of marine biotechnology industry.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.16 no.1
• /
• pp.9-18
• /
• 2010

For screening test of the non-volatile compounds which migrate from food packaging materials into foodstuffs, the traditional high performance liquid chromatography (HPLC) systems suffer from the lack of universal detector with high sensitivity and universality and high efficiency HPLC separation column which provides complete separation of complex mixtures into all individual substances. In this work, the use possibility of online two-dimensional liquid chromatography (2D-LC) system coupled with a charged aerosol detector (CAD), a universal detector, was reviewed. 2D-LC system permits to improve peak capacity and resolving power for complex mixtures. Charged aerosol detector (CAD) offers a new feasibility for detection of any non-volatile compounds with high sensitivity and constant response factor in a calibration range. The combination of size exclusion chromatography (SEC) and normal phase HPLC (NP-HPLC) is most frequently used for the separation of the natural and synthetic polymers which are mainly used as raw materials for the manufacture of food packaging materials. However, there is no commercial software available for data acquisition and handling and therefore the quantification in 2D-LC analysis is still rare.