• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.166-171
• /
• 2001

A digital seismic data acquisition and processing system using a PC has been developed in order to replace the analog data acquisition system of shallow marine seismic survey. An A/D converter that has 12bits of resolution and 225KHz of conversion rate was ued to acquire data, and a data acquisition software was developed as a Windows program which provides convenience of use. Raw data acquired at field has been saved to the hard-disk simultaneously. The signal to noise ratio, vertical and horizontal resolution could be improved by a digital data processing of the raw data. The digital processing of the raw data includss gain recovery, filtering, deconvolution, and muting. With the prediction deconvolution algorithm multiple reflections appearing on the shallow marine seismic section could be removed successfully.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.582-585
• /
• 2005

The Geostationary Operational Environmental Satellite (GOES) 9, which is currently located at 155°E geostationary orbits, has transmitted earth observation data acquired by imager to CDA at NOAA. After the acquisition on ground, observation data are corrected on ground and re-transmitted to GOES-9 for the dissemination to users. In this paper, the procedure and result from raw data acquisition and pre-processing for earth observation imagery retrieval from GOES-9 Raw data acquired in Korea at May 2005 are introduced.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.6
• /
• pp.102-108
• /
• 2002

This paper handles the design of a real time traffic data acquisition system using loop detector and piezo-electric sensor to acquire the vehicle information EISA compatible parallel I/O interface card is designed to sample 30 I/O channels at variable rates for raw traffic data acquisition. The control software is designed to generate the traffic data informations from the raw data. The traffic data information provides vehicle length, speed, number of axles, etc. Vehicle types are detected and categorized into eleven types from the vehicle length, axles positions and axle counts information. The traffic information is formed into packet and transferred to the remote hosts through serial communications for ITS applications.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.3
• /
• pp.57-62
• /
• 2022

Recently, the tracking radar continues research to develop a new operation algorithm that can acquire and track a target in various environments. In general, modeling similar to the real target and environment is used to develop a new operation algorithm, but there is a limit to modeling the real environment. In this paper, a RAW data storage device was developed to efficiently develop a new operation algorithm required for the tracking radar using millimeter wave to acquire and track the target. The RAW data storage equipment is designed so that the signal processing device of the tracking radar using millimeter wave can save the RAW data output from 8 channels to OOOMSPS. RAW data storage equipment consists of data acquisition equipment and data storage equipment. The data acquisition equipment was implemented using a commercial Xilinx KCU 105 Evaluation KIT capable of high-speed data communication interface, and the data storage equipment was implemented by applying a computer compatible with the commercial Xilinx KCU 105 Evaluation KIT. In this paper, the performance of the implemented RAW data storage equipment was verified through repeated interlocking tests with the signal processing device of the millimeter wave tracking radar.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.235-238
• /
• 2007

This paper presents an efficient data storage and reconstruction method in data acquisition and processing of monitoring system. The proposed method extracts minimum data using an interpolation from raw data which are acquired from a target system. The algorithm for data acquisition and reconstruction is based on Cubic Hermite interpolation. To verify the validity of the proposed scheme, we presents simulation results and it is applied to a monitoring system for grid-connected photovoltaic power generation system to prove the high-performance of the proposed method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.761-764
• /
• 2001

A conceptual design of marine environmental information system(MEIS) for vessels running in the ocean was carried out. MEIS consists of a remote acquisition system of raw environmental data, a physical and numerical processing system of acquired raw data, and a supporting satellite communication system for data transfer. The efficiency of a remote acquisition system depends on the amount of acquired data and its real-time accessibility, while the efficiency of a data processing system is governed by the flexibility and accuracy of data analysis tools.

• Journal of Satellite, Information and Communications
• /
• v.6 no.2
• /
• pp.1-9
• /
• 2011

The Communication Ocean and Meteorological Satellite(COMS), the first geostationary observation satellite, was successfully launched on June 27th in 2010. The raw data of Meteorological Imager(MI) and Geostationary Ocean Color Imager(GOCI), the main payloads of COMS, is delivered to end-users through the on-ground processing. The COMS Image Data Acquisition and Control System(IDACS) developed by Korea Aerospace Research Institute(KARI) in domestic technologies performs radiometric and geometric corrections to raw data and disseminates pre-processed image data and additional data to end-users through the satellite. Currently the IDACS is in the nominal operations phase after successful in-orbit testing and operates in National Meteorological Satellite Center, Korea Ocean Satellite Center, and Satellite Operations Center, During the in-orbit test period, validations on functionalities and performance IDACS were divided into 1) image data acquisition and transmission, 2) preprocessing of MI and GOCI raw data, and 3) end-user dissemination. This paper presents that IDACS' operational validation results performed during the in-orbit test period after COMS' launch.

• Current Optics and Photonics
• /
• v.7 no.6
• /
• pp.683-691
• /
• 2023

A typical terahertz time-domain spectroscopy system requires large, expensive, and heavy hardware such as a lock-in amplifier and a function generator. In this study, we replaced the lock-in amplifier and the function generator with a single sound card built into a typical desktop computer to significantly reduce the system size, weight, and cost. The sound card serves two purposes: 1 kHz chopping signal generation and raw data acquisition. A unique software lock-in (Python coding program to eliminate noise from raw data) method was developed and successfully extracted THz time-domain signals with a signal-to-noise ratio of ~40,000 (the intensity ratio between the peak and average noise levels). The built-in sound card with the software lock-in method exhibited sufficiently good performance compared with the hardware-based method.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.399-403
• /
• 2006

Software-based GNSS receivers have the great advantage in flexibility compared with conventional receivers. But it has some problems to processing IF level Signal RAW data, need long time to process long term data and TTFF is long because the process is too slow. So this time, we concentrated on the signal acquisition, and examined the speedup technique. Using this technique, the acquisition was speedup dramatically, and signal-to-noise ratio was improved.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2956-2958
• /
• 2000

This paper describes the design of a real time traffic data acquisition system using loop detector and piezzo sensor. Loop detector is the cheapest method to measure the speed and piezzo is used to detect the vehicle axle information. A ISA slot based I/O board is designed for data acquisition and PC process the raw traffic data and transfer the data to the host system. Simulation kit is designed with toy car kits. simulated loop detector and piezzo sensor. The data acquisition system collects up to 10 lane highway traffic data such as vehicle count. speed. length axle count. distance between the axles. The data is processed to generate traffic count, vehicle classification, which are to be used for ITS. The system architecture and simulation data is included and the system will be tested for field operation.