• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.2
• /
• pp.32-45
• /
• 2000

This paper presents the analytic derivation of the SINR, when a linear array antenna is accommodated into the cellular CDMA basestation receiver, in relation to the two major performance effecting factors in beamforming(BF) applications, i. e., the direction selectivity, which refers to the narrowness of the mainbeam width, and the direction-of-arrival(DOA) estimation accuracy. The analytically derived results are compared with the operation simulation of the receiver realized with the several BF algorithms and their agreements are confirmed, consequently verifying the correctness of the analysis and the operation simulation. In order to investigate separately the effects of the errors occurring in the direction estimation and in the interference suppression, which are the two major functional components of general BF algorithms, both the algorithms of steering BF and the minimum- variance- distortionless-response(MVDR) BF are applied to the analysis. A signal model to reflect the spatially scattering phenomenon of the RF waves entering into the .:nay antenna, which directly affects on the accuracy of the BF algorithm's direction estimation, is also suggested in this paper and applied to the analysis and the operation simulation. It is confirmed from the results that the enhancement of the direction selectivity of the away antenna is not desirable in view of both the implementation economy and the BF algorithm's robustness to the erroneous factors. Such a trade-off characteristics is significant in the sense that it can be capitalized to obtain an economic means of BF implementation that does not severely deteriorate its performance while ensuring the robustness to the erroneous effects, consequently manifesting the significance of the analysis results of this paper that can be used as a design reference in developing BF algorithms to the cellular CDMA system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.2
• /
• pp.250-258
• /
• 2004

An experiment was conducted to examine the effect of a high environmental temperature on the performance, conformation, and carcass characteristics of pigs and the influence of diet. Thirty-six three-way crossed castrated male pigs with average initial body weight of 50.4 kg were used in the experiment. The pig were allocated to the following treatments: two environmental temperatures (20 and $30^{\circ}C$)${\times}$three dietary energy levels (2,980, 3,300 and 3,600 kcal/kg)${\times}$three protein levels (12.8, 15.2 and 17.2%). Daily weight gain was lighter (p<0.01) and feed: gain ratio lower (p<0.05) in pigs at $30^{\circ}C$ than for pigs at $20^{\circ}C$ The pigs at $30^{\circ}C$ were significantly taller with deeper bodies (p<0.05) and significantly longer (p<0.05) both vertically horizontally in the planum nasal when kept at $30^{\circ}C$. The width of body and the circumference of the neck were greater (p<0.05) at $20^{\circ}C$. The lean meat of the loin, middle section, ham, and hind section were significantly greater (p<0.05) in pigs kept at $30^{\circ}C$ and the belly was significantly heavier. The total unsaturated free fatty acids were significantly higher (p<0.05) in the body fat of pigs kept at $20^{\circ}C$ than in that of pigs at $30^{\circ}C$. The results indicated that when pigs are given very restricted same amounts of feed, they may need less energy to maintain their body temperature under moderately high environmental temperature ($30^{\circ}C$); consequently, their performance is better than that of pigs under optimum environmental temperature. The results showed very clearly that weight gain of pigs increased with increasing of dietary protein and energy content. The increasing of dietary protein content seemed more significant when content increasing to 17.2% compared with the 12.8 and 15.2% protein content treatments. The increasing of dietary energy content was more significant when content increasing to 3,600 compared with the other low energy content treatments.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.1
• /
• pp.17-24
• /
• 1983

The authors carried out an experiment to find the optomotor response of killifish, Orizias latipes(TEMMINCK et SCHLEGEL) and Yellowtail, Seriola quinqueradiata (TEMMINCK et SCHLEGEL) according to the colors of the netting pattern on the visual screen and the revolving velocities of the visual screen. The experimental water tank was made of 0.5 cm thick transparent acryl in the cylindrical shape (100R$\times$42H cm). The water level in the tank was maintained 30cm high from the bottom. The colors of the netting pattern (mesh size: 19.1cm, width of netting twine: 1.5cm, hanging ratio: 84%) on the three visual screens were black, red and green respectively. The revolving velocities of the visual screen were controlled by pulley, bevel gear and variable speed motor in three steps; slow (15.0cm/sec), middle (37.4cm/sec) and high (62.9cm/sec). The fish was put into the water tank before each experiment and released in it for 30 minutes in order to acclimatize itself to the tank. The visual screen was revolved for 4 minutes per each experiment, at first the fish was released for 1 minute, and then the behavior of the fish was observed for 3 minutes. In the course of clockwise and counter clockwise experiments, 10 minutes-pause was given for the rest. The behavior of the fish was observed by video system, and rounding number and swimming speed of the fish were analysed. The results obtained are as follows: (1) Optomotor response rate of Killifish and yellowtail were 95% and 94% respectively. (2) Response of the fish according to the colors of the netting pattern on the three visual screens was best in black, and second in red and third in green. (3) Response of the fish according to the revolving velocities of the visual screen was best in high speed, and second in middle speed and third in slow speed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.4
• /
• pp.1-12
• /
• 2024

In this study, a determination method of structural member section based on Nonlinear behaviors of steel cable-stayed bridges and the Harmony Search algorithm was presented. The Harmony Search algorithm determines the structural member section of cable-stayed bridges by repeating the process of setting the initial value, initializing the harmony memory, configuring the new harmony memory, and updating the harmony memory to search for the optimal value. The nonlinear initial shape analysis of a three-dimensional steel cable-stayed bridge was performed with the cross-section of the main member selected by the Harmony Search algorithm, and the optimal cross-section of the main members of the cable-stayed bridge, such as pylons, girders, cross-beams, and cables, reflecting the complex behavior characteristics and the nonlinearity of each member was determined in consideration of the initial tension and shape. The total weight was used as the objective function for determining the cross-section of the main member of the cable-stayed bridges, and the load resistance ability and serviceability based on the ultimate state design method were used as the restraint conditions. The width and height ratio of the girder and cross-section were considered additional restraint conditions. The optimal sections of the main members were made possible to be determined by considering the geometry and material nonlinearity of the pylons, girders, and cross-sections and the nonlinearity of the cable members. As a result of determining the optimal cross-section, it was confirmed that the proposed analysis method can determine the optimal cross-section according to the various constraint conditions of the cable-stayed bridge, and the structural member section of the cable-stayed bridge considering the nonlinearity can be determined through the Harmony Search algorithm.

• Journal of the Korean Wood Science and Technology
• /
• v.4 no.1
• /
• pp.8-14
• /
• 1976

The capacity of wood to shrinkage is very important as the basis data for wood industry but there is no such data available as yet in Korea. So this article, as a study on forest biological, were made to determine the shrinkage properties of commercial hardwoods in Korea. The results of this study were as follows; 1) There are much difference of hardwoods shrinkage, generally values of heavy wood's shrinkage were larger than that of light wood's shrinkage. 2) The arithmetic; mean values of hardwoods shrinkage were respectively 9.03% on tangential, 4.09% on radial and 0.37% on longitudinal direction and its ratio of at : ar : al was appeared to be 10 : 5.5 : 0.4 3) Average shrinkage per 1% of moisture content was different due to the direction and species. 4) According to the increase of specific gravity the values of shrinkage increased. 5) It was recognized that the shrinkage of hardwoods had a tendency to decrease as increase of annual ring width of wood. 6) The shrinkage of tangential direction was in propertion to the shrinkage of radial direction.

• Korean Journal of Medicinal Crop Science
• /
• v.3 no.1
• /
• pp.35-39
• /
• 1995

Characteristics of Schizandra chinensis BAILLON collected were investigated the development of the new varieties and the results obtained are as follows: Flowering time of Schizandra chinensis varieties were varied from May 6 to 15. In petal base colors 70% were light pinked-colored, 23% were dark pinkcolored and 23% were white-colored respectively and number fruit set per node are 2 to 3 and 60% of plants were flower set and length of diameter of female flower longer than those of male flowers. Among 155 plants investigated, 125 plants showed below 40% of fruit setting and average fruit setting were 26%, 83% of plants were below 12mm, white 17% were above 12.1mm in fruit length, 100 dry fruit weight was 13.2g on average showing significant variation among plants. Average values of major characteristics of populations of collected varieties were 82.5 in number of fruit set, 68.3 in number of fruits 68.3mm in length of fruit set, 22.8mm in width of fruit set, 10.7mm in length of granule 103.1g in dry fruit weight per plants and ratio of dry fruit was 26.8% respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.121-121
• /
• 2010

ZnO is a promising material for the application of high efficiency light emitting diodes with short wavelength region for its large bandgap energy of 3.37 eV which is similar to GaN (3.39 eV) at room temperature. The large exciton binding energy of 60 meV in ZnO provide provides higher efficiency of emission for optoelectronic device applications. Several ZnO/ZnMgO multiple quantum well (MQW) structures have been grown on various substrates such as sapphire, GaN, Si, and so on. However, the achievement of high quality ZnO/ZnMgO MQW structures has been somehow limited by the use of lattice-mismatched substrates. Therefore, we propose the optical properties of ZnO/ZnMgO multiple quantum well (MQW) structures with different well widths grown on lattice-matched ZnO substrates by molecular beam epitaxy. Photoluminescence (PL) spectra show MQW emissions at 3.387 and 3.369 eV for the ZnO/ZnMgO MQW samples with well widths of 2 and 5 nm, respectively, due to the quantum confinement effect. Time-resolved PL results show an efficient photo-generated carrier transfer from the barrier to the MQWs, which leads to an increased intensity ratio of the well to barrier emissions for the ZnO/ZnMgO MQW sample with the wider width. From the power-dependent PL spectra, we observed no PL peak shift of MQW emission in both samples, indicating a negligible built-in electric field effect in the ZnO/$Zn_{0.9}Mg_{0.1}O$ MQWs grown on lattice-matched ZnO substrates.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.5
• /
• pp.431-435
• /
• 1992

This experiment was carried out to evaluate Korean red rices as useful genetic resource. Semi-wild red rices were collected from farmer's field of the Korean peninsula from 1988 to 1991. The collected red rices were classified into two groups according to length /width ratio of paddy rice and ecological characters. One was long grain red rice and the other was short grain red rice. Those were evaluated in yield components, culm length and panicle length. Mean number of panicles per hill of collected long grain red rices was 21.5 and that of short grain was 11.8. Number of spikelets per panicile of the long and short grain red rices were 86.1 and 108.7, respectively. 1000 grains weight of long grain was 20.1g and that of short grain was 20.2g. Spikelet fertility of long and short grain were 80.4% and 79.4%, respectively. Culm length of long grain was 103.6cm and that of short grain was 94.8cm. Panicle length of long and short grain were 22.1cm and 21.3cm, respectively. Number of panicles per hill, number of spikelets per panicle and culm length were significantly different between the two groups, however no differences, in panicle, length and seed fertility were found between the two groups.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.107-112
• /
• 1999

The ZnSe/GaAs epilayers were grown by RF reactive sputtering. In order to obtain the optimum condition of the growth, we have studied the dependence of Ar pressure, input power of sputter, temperature of substrate, and the distande between substrate and target. Through the observation of the grown epilayer via electronic microscope, we confirmed that the layer's surface was uniform and the boundary of the substrate and the layer was well defined. The defotmation of lattice distortion and the distortion ratio were obtained by DCRC measurements. From mrasurements of photoluminescence, in the ZnSe/GaAs sample without injection of $N_2$gas, we found that the intensity of bound exciton $I_2$is stronger than that of $I_1$and the bound exiton $I_1$represents the deep acceptor level, $I_1\;^d$. On the other hand, in the ZnSe/GaAs sample with injection of$N_2$gas, the peak of$I_1$ was much higher than that of the $I_2$and the half width appeared to be narrow. We concluded that the p-type of ZnSe/GaAs epilayer was grown successfully, because of stronger peak of the bound exciton $I_1$due to the $N_2$dopping.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.251-259
• /
• 1996

Two-Photon Fluorescence (TPF) experiment measures temporal width of an amplified short laser pulse which has passed through a four-pass Nd: glass amplifier, after selecting a single pulse from pulse train Q-switched and mode-locked(QSML) in Nd:YLF master oscillator. Determination of pulsewidth and pulseshape was also made with detection of autocorrelation trace of CW mode-locked pulse train by using noncollinear type I Second Harmonic Generation (SHG) method. The observed TPF track showed various patterns, depending on pulse-selecting position in QSML pulse train. That is, autocorrelation of a pulse extracted at front of the train displayed smooth pulse shape, while one from the trailing part of the train created many sharp spikes and substructure in the pulse. By TPF method, pulsewidth was measured to be 44.4 ps with contrast ratio of 2.86 which enabled us to find out energy fraction of a pulse to total energy, (sum of pulse and background); we obtain the value of 0.62. Pulsewidth of 46.6ps was also acquired in another SHG experiment with the help of only mode-locked pulse train. On the other hand, we confirmed that shape of the pulse is close to $sech^2$ one as a result of fitting the SHG autocorrelation signal with various functions. With simulation using this $sech^2$ type of pulse, pulsewidth reduction of the beam, having passed through four-pass amplifier, was also verified.