• Journal of Korean Society of Forest Science
• /
• v.108 no.1
• /
• pp.21-28
• /
• 2019

This study was conducted to determine the carbon (C) and nitrogen (N) response of litterfall components as affected by N addition in compound fertilizer in a Korean red pine (Pinus densiflora S. et Z.) stand in southern Korea. Litterfall in a mature red pine stand was collected for two years following compound fertilizer application ($N_3P_4K_1$; $P_4K_1$) and no fertilization (control). The C concentration of litterfall components was not significantly (P > 0.05) different between the $N_3P_4K_1$ and the control plots, whereas the N concentration of the litterfall components was significantly higher in the $N_3P_4K_1$ plot than in the control plot. The $N_3P_4K_1$ and $P_4K_1$ additions induced a lower C/N ratio of litterfall components compared with the control plot. Annual C and N fluxes via litterfall components were not affected by the $N_3P_4K_1$ addition over the study period, except for reproduction litter. Annual N fluxes via reproduction litter were significantly higher in the $N_3P_4K_1$ plot than in the control plot. Thus, the $N_3P_4K_1$ and $P_4K_1$ additions could modify differently nutrient distribution of the forest floor and mineral soils in a red pine stand. These results indicate that N concentration and C/N ratio in litterfall components are more susceptible to fertilizer application than the C response in litterfall components.

• International Journal of Concrete Structures and Materials
• /
• v.8 no.1
• /
• pp.1-14
• /
• 2014

In the present paper, a behavioral model is proposed for study of the individual contributions to shear capacity in shear-critical reinforced concrete members. On the basis of the relationship between shear and bending moment (V = dM/dx) in beams subjected to combined shear and moment loads, the shear resistant mechanism is explicitly decoupled into the base components-beam action and arch action. Then the overall behavior of a beam is explained in terms of the combination of these two base components. The gross compatibility condition between the deformations associated with the two actions is formulated utilizing the truss idealization together with some approximations. From this compatibility condition, the ratio of the shear contribution by the tied arch action is determined. The performance of the model is examined by a comparison with the experimental data in literatures. The results show that the proposed model can explain beam shear behavior in consistent way with clear physical significance.

• ETRI Journal
• /
• v.33 no.5
• /
• pp.810-813
• /
• 2011

We report the use of a widely tunable detuned dual-mode laser diode (DML) as a compact and portable continuous-wave THz emitter. The wavelength difference between the two lasing modes of this DML can be tuned from 2.4 nm to 9.3 nm by using integrated microheaters. The power difference between these modes is less than 1 dB, and the side-mode suppression ratio is greater than 30 dB over the entire tuning range.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.5
• /
• pp.920-927
• /
• 1998

The purpose of this study was to investigate the correlation between serum component and immune function in Korean female college students according to the body mass index. There were significant increased in weight, body fat, LBM, TBW, WHR in subjects as their BMI increase(p<0.001). It was found obese group had higher levels of serum components such as total cholesterol, LDL-cholesterol and Cu levels than those of the normal group. There was a significant positive correlation between HDL-cholesterol level and NK cell number(p<0.01), between A/G ratio and T lympocytes number(p<0.05), between Cu levels and B lympocytes(p<0.01) in normal group. There was a significant positive correlation between TG level and CD4/8 ratio(p<0.001), between and IgG(p<0.001) in obese group.

• Transactions of Materials Processing
• /
• v.23 no.1
• /
• pp.23-28
• /
• 2014

The aspect ratio of a hole is defined as the ratio of the thickness to the diameter of the sheet metal. Most holes in the sheet metal industry are made by piercing. However, for thick sheets, which have an aspect ratio greater than 2, a machining process like drilling instead of piercing is usually used to make holes. In the current study, piercing, which is a shearing process, is evaluated to punch a hole with a high aspect ratio by using a newly designed die set-up. The piercing die was manufactured to prevent the punch from buckling and also to improve the alignment between the die components. An aluminum alloy sheet was selected for the experiments. The influence of several process parameters such as sheet thickness, clearance and stripping force were investigated. Experimentally, a hole with an aspect ratio of 5 was pierced. The resulting hole had a clean surface and the dimensional accuracy of pierced hole was considerably improved with decreasing clearance between punch and die. It is also shown that the larger penetration depth of the effective sheared surface can be achieved for high aspect ratio piercing relative to conventional piercing with a low aspect ratio.

• PNF and Movement
• /
• v.1 no.1
• /
• pp.33-41
• /
• 2003

Objectives : The purpose of this study was to describe and compare the temporo-spatial gait characteristics of healthy young people with those of healthy elderly people. Methods: The data were collected by 40 volunteers. 20 subjects were between 20 and 31 years of age, and 20 subjects were between 65 and 84 years of age. Temporal and spatial parameters of gait were analysed for using the computerized GAITRite system. Results : The system integrates specific components of locomotion to provide a single, numerical representation of gait, the Functional Ambulation Performance score. Differences in gait characteristics between the two groups were examined using a correlated t-test(p<.05). Significant differences were observed between the groups for step length, step/extremity ratio and velocity. Young people demonstrated a significantly larger velocity, step length and step/extremity ratio than the elderly people. Conclusions: These results indicate that the GAITRite system can be useful in detecting footfall patterns and selected time and distance measurements of young and older persons. Additionaly, differences in walking velocity, step length and step/extremity ratio between old and young people may have influenced the gait characteristics measured.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.5
• /
• pp.892-900
• /
• 1997

This study was carried out to investigate the clinical characteristics of 78 diabetics by body fat distribution pattern. It was based on the survey of nutritional status, anthropometric measurements and serum components of the patients. The results were as follows: the average ages of male and female subjects were 57.1, and that of female subjects was 58.9, respectively. The average diabetic durations of male and female subjects were 4.8 and 5.9 years, respectively. In male, the ratio of upper body obese subject was 62.5% and the lower body obese subjects was 37.5%, while those of female were 69.4% and 30.6%, respectively. In nutrient intake state, there was no significant difference between male and female subjects, but calory intake of upper body obese subjects was difference between male and female subjects, but calory intake of upper body obese subjects was tend to be higher in both male and female subjects. among the three major nutrients/calory ratio, protein/calory ratio was significantly lower in the male upper body obese subjects than in the male lower body obese subjects. Since weight, circumference of arm and waist, waist hip ratio(WHR) of both male and female subjects, body muscle mass(BMM) of male subjects and body mass index (BMI) of female subjects were significantly higher in upper body obese group, upper body obese subjects represented ore fat than lower body obese subjects. In male subjects, hemoglobin(Hb), A/G of upper body obese subjects were lower than the standard value, but there was no significant difference in the serum components between two subjects. In female subjects, Hb and A/G of lower body obese subjects were lower than those of the normal subjects, but Hb and Ht of upper body obese subjects were significantly higher than those of the lower body obese subjects.

• Earthquakes and Structures
• /
• v.15 no.5
• /
• pp.453-462
• /
• 2018

Damages to buildings affected by a near-fault strong ground motion are largely attributed to the vertical component of the earthquake resulting in column failures, which could lead to disproportionate building catastrophic collapse in a progressive fashion. Recently, considerable interests are awakening to study effects of earthquake vertical components on structural responses. In this study, detailed modeling and time-history analyses of a 12-story code-conforming reinforced concrete moment frame building carrying the gravity loads, and exposed to once only the horizontal component of, and second time simultaneously the horizontal and vertical components of an ensemble of far-field and near-field earthquakes are conducted. Structural responses inclusive of tension, compression and its fluctuations in columns, the ratio of shear demand to capacity in columns and peak mid-span moment demand in beams are compared with and without the presence of the vertical component of earthquake records. The influences of the existence of earthquake vertical component in both exterior and interior spans are separately studied. Thereafter, the correlation between the increase of demands induced by the vertical component of the earthquake and the ratio of a set of earthquake record characteristic parameters is investigated. It is shown that uplift initiation and the magnitude of tensile forces developed in corner columns are relatively more critical. Presence of vertical component of earthquake leads to a drop in minimum compressive force and initiation of tension in columns. The magnitude of this reduction in the most critical case is recorded on average 84% under near-fault ground motions. Besides, the presence of earthquake vertical components increases the shear capacity required in columns, which is at most 31%. In the best case, a direct correlation of 95% between the increase of the maximum compressive force and the ratio of vertical to horizontal 'effective peak acceleration (EPA)' is observed.

• Korean Journal of Human Ecology
• /
• v.16 no.2
• /
• pp.407-419
• /
• 2007

The purpose of this study was to identify the effect of four clothing cues dot pattern size and ground field of color area ratio on dress's wearer image. The experimental materials developed for this study are a set of stimuli and response scales(The 7-point semantic). The stimuli were 30 color pictures manipulated with the combination of dot pattern size, dot pattern on background of color area ratio and neutral dress's using computer simulation. The subjects were 180 female undergraduates living students in Gyeong-nam. The result of this study are as follows: Image factor of the stimulus was composed of 5 different components (visibility, gracefulness, attractiveness, cuteness, womanly). Especially, Neutral color combination independently influenced the every components. In regarding the effect of interaction between each variable, the combination of dot pattern on background of color area ratio, dot pattern size on the combination had cuteness, womanly.

• Structural Engineering and Mechanics
• /
• v.37 no.2
• /
• pp.131-147
• /
• 2011

The logarithmic decrement method has been long used to estimate damping ratios in systems with only one modal component such as linear single degree of freedom (SDOF) mechanical systems. This paper presents an application of a methodology that uses joint time-frequency distribution (JTFD) as input, instead of the raw signal, to systems with several vibration modes. A most important feature of the present approach is that it can be applied to a system with time-varying damping ratio. Initially the precision and robustness of the method is determined using a synthetic model with multiple harmonic components, one of them displaying a time-varying damping ratio, subsequently the results obtained from experiments with a reduced model are presented. A comparison is made between the results obtained with this methodology and those using the classical technique of Least Squares Complex Exponential Method (LSCE) in order to highlight the advantages of the former, such as, good precision, robustness and excellent performance in extreme cases, e.g., when very low frequency components and time varying damping ratio are present.