• 한국자동차공학회논문집
• /
• 제23권5호
• /
• pp.502-507
• /
• 2015

In this paper, we built a three-dimensional model by applying reverse engineering techniques on targeting the intake port of 2900cc class diesel engine before that three-dimensional design technique is applied. The performance of the intake port is predicted and analysed using the computational flow analysis. Flow Coefficient and Swirl Ratio have been analyzed for two intake port models. One is the intake port for the diesel engine with plunger-type fuel system, and the other is for the diesel engine with CRDI fuel system. Computational result shows that the Flow Coefficient of the intake port with CRDI fuel system is increased upto 10 percentage compared with that with plunger-type. Also, the intake port with plunger-type has high Swirl Ratio at high valve lift, and the intake port with CRDI fuel system has high Swirl Ratio at relatively low valve lift. It is believed that because of high performance of the fuel injector, the intake port with CRDI fuel system is designed for more air amount and not much swirl flow at high valve lift. However, high swirl flow is required at low valve lift for initial fuel and air mixing. The result of this study may be useful for the re-manufacturing industry of automotive parts.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.570-574
• /
• 1995

Magnetoresistance of NiFeCo/Cu/NiFeCo/FeMn uncoupled exchange biased sandwiches has been studied. The magnetoresistance change ratio, ${\Delta}R/R_{s}$ showed 4.1 % at a saturation field as low as 11 Oe in $Si/Ti(50\;{\AA})/NiFeCo(70\;{\AA})/Cu(23\;{\AA})/NiFeCo(70\;{\AA})/FeMn(150\;{\AA})/Cu(50\;{\AA})$ spin valve structure. In this system, the magnetoresistance was affected by interlayer material and thickness. When Ti and Cu were used as the interlayer material in this structure, maximum magnetoresistance change ratio were 0.32 % and 4.1 %, respectively. 6.1 % MR ratio was obtained in $Si/Ti(50\;{\AA})/NiFeCo(70\;{\AA})/Cu(15\;{\AA})/NiFeCo(70\;{\AA})/FeMn(150\;{\AA})/Cu(50\;{\AA})$ spin valve structure. The magnetoresistance change ratio decreased monotonically as the interlayer thickness increased. It was found that the exchange bias field exerted by FeMn layer to the adjacent NiFeCo layer was ~25 Oe, far smaller than that reported in NiFe/Cu/NiFe/FeMn spin valve structure(Dieny et. al., ~400 Oe). The relationship between the film texture and exchange anisotropy ha been examined for spin valve structures with Ti, Cu, or non-buffer layer.

• 한국자동차공학회논문집
• /
• 제9권4호
• /
• pp.121-130
• /
• 2001

For the purpose of optimal control of anti-lock brake systems, precise dynamic characteristics analysis of hydraulic modulator, especially solenoid valve is necessary. However, most of researches so far have dealt with dynamic characteristic analysis of valve itself, and the results have been restrictively applied to the actual ABS modulator, where hydraulic pressure is acting. In this study, mathmatical modeling and experimental analysis were peformed in order to evaluate the valve dynamic characteristics when the hydraulic pressure is applied. High pressure on the master cylinder that affects on the valve dynamic characteristics have been analyzed quantitatively, and performance improvement methods have been suggested through parameter study. Consequently, results of solenoid valve dynamic characteristics analysis derived in the study can be utilized as criteria for the optimal control of anti-lock brake systems.

• 한국수소및신에너지학회논문집
• /
• 제11권3호
• /
• pp.107-117
• /
• 2000

Ball poppet valve type high pressure hydrogen injection valve actuated by solenoid has been developed for the feasibility of practical use of hydrogen fueled engine with direct injection and the precise control of fuel injection ratio in hydrogen fueled engine with dual injection. The gas-tightness of ball poppet injection valve is improved by the introduction of ball-shaped valve face, valve end typed spherical pair, and valve stem with rotating blade. Ball poppet valve is mainly closed by differential pressure due to the area difference between valve fillet and pressure piston. So, it can be operated by solenoid actuator with small driving force. From the evaluation of ball poppet injection valve, it was found that the gastightness and controlment of this injection valve are better than those of injection valve had been developed before.

• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.59-72
• /
• 1998

This experimental study was carried out to investigate the characteristics of the in-cylinder eccentricity swirl flow generated by a 4 valve cylinder head with a tangential and a helical intake port. the measurements of the in-cylinder velocity field have been made by a two-channel LDA system. The mean flow coefficient(Cf(meam)), swirl ratio(Rs) and mass flowrate with valve eccentricity ratios and an intake port partition between the two intake ports were measured in the steady flow test fig using the ISM(impulse swirl meter). The experimental results indicated that the mass flowrate through the tangential intake port was 19% and 7.7% more than that of the helical intake port in case of with and without intake port partition respectively. There was a tendency to be a single rotation flow in swirl flow fields formed by a 4 valve cylinder head because of the interaction between the two intake ports. As the intake port partition was not set between flow coefficient(Cf(mean)) was 7.35%.

• 에너지공학
• /
• 제21권4호
• /
• pp.378-384
• /
• 2012

Higher compression ratio is required in diesel engine to ignite the fuel that leads to better efficiency. For complete combustion inside the cylinder it is important to ensure the clean air flow with free of debris and as cool as possible. In this manner, modification of intake valve arrangements is taken in to consideration importantly. In this paper, the intake valve arrangements are modified with newly designed valve mixer. It causes swirl flow of air through the intake port that mixing with the fuel followed by complete combustion. The use of valve mixer reduces the carbon sediment formation on valve fillet and its face area as the carbon particles gradually take place on it after certain running period. It therefore, helps to increase the valve lifetime. And at the same time it reduces the exhaust elements i.e. soot from the automobiles to a significant level.

• Journal of Chest Surgery
• /
• 제43권6호
• /
• pp.602-613
• /
• 2010

배경: 사람의 수명이 연장되면서 판막 질환이 점차 증가하는 가운데, 과거에는 심장 판막 이식에 기계 판막을 많이 사용하였으나, 혈액 응고 장애로 인한 출혈, 임신 시 태아의 기형 가능성, 판막의 급성 기계적 작용 부전, 평생 약을 복용해야 하는 불편함 등의 여러 합병증이 동반되는 단점이 있어, 조직 판막 사용이 증가하고 있고, 그 내구성을 높이기 위한 연구와 관심이 점차 증가하고 있다. 현재 사용하는 조직 판막은 외국계 회사의 수입된 제품으로서 그 구조나 도안에 이론적인 제안 등이 부족한 실정이다. 이에 본 연구는 돼지의 대동맥 및 폐동맥 판막의 구조에 대한 기하학적 분석을 시행하고, 각 수치를 계량화, 분석하여 그 3차원적 구조를 이해하여 대동맥 판막과 폐동맥 판막을 만들 수 있는 이론적 배경을 제시하고자 하였다. 대상 및 방법: 도축한 25마리의 돼지에서 채취한 대동맥 판막과 폐동맥 판막을 신선한 상태에서, 그리고 글루타알데하이드(GA) 용액으로 고정한 상태에서 판막의 각 구조물 수치를 2차원적으로 측정하여 그 배율을 계량화하고 분석하였다. 신선한 상태와 글루타알데하이드(GA) 용액으로 고정한 상태에서 판막엽 간 길이, 접합면 간 길이, 판막엽의 높이, 접합면 높이를 각각 측정하였다. 또한 이식 가능한 판막을 제작하기 위하여 스텐트의 도안으로 모양, 유순도에 따른 스텐드의 두께, 높이, 간격 및 판막 크기에 따른 심낭 판막엽의 크기, 모양, 두께 등을 도안하였다. 결과: 돼지 대동맥과 폐동맥 판막의 수치 및 각 구조물들의 배율을 구하였다. 대동맥 판막 및 폐동맥 판막은 각각 우측 관상동맥 첨판 및 우향 관상동맥 첨판의 크기가 상대적으로 제일 컸다. 무접합 관상동맥 첨판이 가장 작았으며(우향 관상동맥 첨판: 무접합 관상동맥 첨판: 좌향 관상동맥 첨판=1.00 : 0.88 : 1.00), 판막의 높이는 첨판의 크기에 비례하였다. 스텐트를 사용한 돼지 대동맥 판막은 외측 직경 크기를 19 mm부터 33 mm까지 정하였고, 이전에 정한 비율 및 스텐트 두께, 그리고 실제 판막 제작에 필요한 봉합 두께와 판막 주변 벽의 두께 등을 고려하여 스텐트의 높이 ($R{\times}1.4$, R: radius, 직경), 폭, 간격 수치를 정하였으며, 심낭을 이용한 판엽은 판막의 직경, 각 첨판 길이 ($2{\times}R$), 높이 ($R{\times}1.4$)와 첨판의 최소 접합면을 고려하여 스텐트 크기와 함께 모양을 도안하였다. 결론: 25개의 돼지 대동맥 판막과 폐동맥 판막의 구조물에 대한 수치를 측정하여 판막들의 기하학적 비율을 계산하고, 여려 크기의 이식형 돼지 대동맥 판막을 만들어 볼 수 있었으며, 또한 소의 심낭을 이용하여 다양한 표기의 판막을 만들어 볼 수 있는 이론적 근거를 만들 수 있었다. 향후 이러한 도안의 판막 제작 후 충분한 생체 내외의 실험 및 추가 연구가 필요할 것으로 생각된다.

• 산업기술연구
• /
• 제32권A호
• /
• pp.65-70
• /
• 2012

Carboxy-guns are used for rapid and precise injection of $CO_2$ gas to the target skin area using external power source. In the design of carboxy-gun, the most important thing is how to precisely control injection volume of $CO_2$ gas. This paper deals with the control scheme of injection volume of carboxy-gun using solenoid valve. First the amount of volume that passes through the solenoid valve under on-off time ratio control is estimated based on the assumption of compressible gas flow. The flow rate of gas is experimentally measured under the varying pressure of the gas reservoir. Two results showed good correlation to each other, thus demonstrating the validity of the volume control strategy.

• 설비공학논문집
• /
• 제15권6호
• /
• pp.480-488
• /
• 2003

The purpose of this research Is to derive the principal design parameters governing the dynamic characteristics of the high response flow control servo valve. For this purpose, a numerical modeling of the servo valve system and a parameter sensitivity analysis to a frequency response characteristics was peformed. As a result of these analysis, a basis for improvement of a dynamic characteristics of servo valve was arranged.

• 한국산업융합학회 논문집
• /
• 제6권2호
• /
• pp.149-153
• /
• 2003

Besides the fuel spray behavior and combustion chamber shape. an air motion has a key role on exhaust gas emission and performance in a DI diesel engine. A swirl ratio represents the ratio of the intake swirl velocity to the engine speed. The main purpose in this work is to investigate the effects of the swirl ratio to the combustion characteristics. A shroud valve machined to change the swirl ratio. Test was carry out by changing the engine speed, nozzle diameter and swirl ratio in a single cylinder diesel engine. From this study, the optimized combustion was found at swirl ratio 2.7. And it was also found that the increasing the maximum cylinder pressure with an increasing swirl ratio lead to decrease a smoke and to increase NOx.