• Korean Journal of Metals and Materials
• /
• v.47 no.8
• /
• pp.500-507
• /
• 2009

Pb-free solder has recently been used in electronics in efforts to meet environmental regulations, and a number of Pb-free solder alloy choices beyond the near-eutectic SnAgCu solder are now available. With increased demand for thin and portable electronics, the high cost of alloys containing significant amounts of silver and their poor mechanical shock performance have spurred the development of low Ag SnAgCu solder, which provides improved mechanical performance at a reasonable cost. Although low Ag SnAgCu solder exhibits significantly higher fracture resistance under high-strain rates, little thermal fatigue data exist for this solder. Therefore, it is necessary to investigate thermal fatigue reliability of low Ag SnAgCu solder under variation of thermal stress in order to allow its implementation in electronic products with high reliability requirements. In this study, the reliability of Sn0.3Ag0.7Cu(SAC0307), a low Ag solder alloy, is discussed and compared with that of Sn3Ag0.5Cu(SAC305). Three sample types and six samples size are evaluated. Mechanical properties and microstructure of the solder joint are investigated under thermal shock cycles. It was observed that the mechanical strength of SAC0307 dropped slightly with thermal cycling relative to that of SAC305. This reveals that the failure mode of SAC0307 is different from that SAC305 under this critical condition.

• Earthquakes and Structures
• /
• v.24 no.2
• /
• pp.81-90
• /
• 2023

The maximum drifts are important to the seismic evaluation of steel buildings and connections, but the information can hardly be obtained from the post-earthquake field investigation. This research studies the feasibility of using the loss rate of bolt pretension as an earthquake damage predictor. Full-scale tests were made on four steel connections using bolted-web-welded-flange details. One connection was unreinforced (UN), another was reinforced with double shear plates (DS), and the other two used reduced beam sections (RBS). The preinstalled strain gauges were used to control the pretensions and monitor the losses of the high-strength bolts. The results showed that the loss rate of bolt pretension was highly related to the damage of the connections. The pretensions lost up to 10% in all the connections at the yield drifts of 0.5% to 1%. After yielding of the connections, the pretensions lost significantly until fracture occurred. The UN and DS connections failed with a maximum drift of 4 %, and the two RBS connections showed better ductility and failed with a maximum drift of 6%. Under the far-field-type loading protocol, the loss rate grew to 60%. On the contrary, the rate for the specimen under near-fault-type loading protocol was about 40%. The loss rate of bolt pretension is therefore recommended to use as an earthquake damage predictor. Additionally, the 10% and 40% loss rates are recommended to predict the limit states of connection yielding and maximum strength, respectively, and to define the performance levels of serviceability and life-safety for the buildings.

• Preventive Nutrition and Food Science
• /
• v.5 no.3
• /
• pp.153-159
• /
• 2000

A 4.4 kb DNA fragment encompassing lacA (galactoside acetyltransferase) and lacZ($\beta$-galactosidase) genes from Lactococus lactis ssp. lactis ATCC 7962 (L. lactis 7962) was introduced ito a Lac strain, Lactococcus lactis ssp. lactis MG1363 (L. lactis MG1363) by using a lactococcal expression vector, pMG36e and expression level of lacZ was examined. Growth rates and $\beta$-galactosidase ($\beta$-gal) activities of MG1363 cells carrying recombinant plasmid, pMLZ3, on M17 broth containing different carbon sources (1%, w/v) were examined. Contrary to the expectations, MG1363 [pMLZ3] grown on lactose showed the lowest enzyme activity (17 units) and cells grown on galactose had the highest $\beta$-gal activity (41 units). Cells grown on glucose had intermediate activity (33 units). These activities are about one tenth of the values observed in L. lactis 7962 where lacZ is present as a single-copy gene in the chromosome. When the cellular concentrations of lacZ transcript were examined using slot blot hybridization, it was found that MG1363[pMLZ3] produced sufficient amounts of transcript. These results indicate that either proteolytic degradation of $\beta$-gal or other regulatory mechanism prevent the translation or accumulation of $\beta$-gal in L. lactis MG1363 cells. In regard to regulation, the presence of the ccpA gene in L. lactis MG1363 was confirmed by Southern blot.

• Journal of Powder Materials
• /
• v.22 no.2
• /
• pp.93-99
• /
• 2015

This study investigated the microstructure and tensile properties of a recently made block-type Ni-Cr-Al powder porous material. The block-type powder porous material was made by stacking multiple layers of powder porous thin plates with post-processing such as additional compression and sintering. This study used block-type powder porous materials with two different cell sizes: one with an average cell size of $1,200{\mu}m$ (1200 foam) and the other with an average cell size of $3,000{\mu}m$ (3000 foam). The ${\gamma}$-Ni and ${\gamma}^{\prime}-Ni_3Al$ were identified as the main phases of both materials. However, in the case of the 1,200 foam, a ${\beta}$-NiAl phase was additionally observed. The relative density of each block-type powder porous material, with 1200 foam and 3000 foam, was measured to be 5.78% and 2.93%, respectively. Tensile tests were conducted with strain rates of $10^{-2}{\sim}10^{-4}sec^{-1}$. The test result showed that the tensile strength of the 1,200 foam was 6.0~7.1 MPa, and that of 3,000 foam was 3.0~3.3 MPa. The elongation of the 3,000 foam was higher (~9%) than that (~2%) of the 1,200 foam. This study also discussed the deformation behavior of block-type powder porous material through observations of the fracture surface, with the results above.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.7
• /
• pp.1221-1225
• /
• 2007

A ${\beta}$-ionone-resistant mutant strain isolated from the red yeast Xanthophyllomyces dendrorhous KCTC 7704 was used for batch and continuous fermentation kinetic studies with glucose media in a 2.5-1 jar fermentor at $22^{\circ}C$ and pH 4.5. The kinetic pattern of growth and carotenoid concentration in the batch fermentations exhibited a so-called mixed-growth-associated product formation, possibly due to the fact that the content of intracellular carotenoids depends on the degree of physical maturation toward adulthood. To determine the maximum specific growth rate constant (${\mu}_m$) and Monod constant ($K_s$) for the mutant, glucose-limited continuous culture studies were performed at different dilution rates within a range of $0.02-0.10\;h^{-1}$. A reciprocal plot of the steady-state data (viz., reciprocal of glucose concentration versus residence time) obtained from continuous culture experiments was used to estimate a ${\mu}_m$ of $0.15\;h^{-1}$ and $k_s$ of 1.19 g/l. The carotenoid content related to the residence time appeared to assume a typical form of saturation kinetics. The maximum carotenoid content ($X_m$) for the mutant was estimated to be $1.04\;{\mu}g/mg$ dry cell weight, and the Lee constant ($k_m$), which was tentatively defined in this work, was found to be 3.0 h.

• Korean Journal of Veterinary Research
• /
• v.39 no.6
• /
• pp.1151-1160
• /
• 1999

This study was conducted to detect the toxoplasma-specific DNA in peripheral blood collected from cats experimentally infected with Toxoplasma gondii (RH strain) and from domiciled cats by B1 gene-base polymerise chain reaction(PCR). The sensitivity of oligonucleotide primer, T-1 & T-2, designed from toxoplasma B1 gene amplification method was compared with parasite detection by mouse inoculation(MI). And also, latex agglutination test(LAT) and indirect fluorescent antibody test(IFAT) were conducted to detect the fluctuation of serum antibodies compared with the detection of toxoplasma by PCR and MI. Toxoplasma B1 gene PCR was shown consistently high sensitivity and the results obtained by PCR agreed completely with those from MI. All blood samples collected before infection with T gondii gave negative results by PCR and MI. Also, toxoplasma Bl gene PCR was not cross reaction with Neospora caninum DNA and normal cat leucocyte as controls. The toxoplasma-specific DNA was detected by PCR in blood of 5 cats experimentally infected with T gondii 6 days after infection and the detection of this specific-DNA was long lasted in blood for 64 days after infection. The detection of toxoplasma-specific DNA by PCR could be identified as few as 10 tachyzoites and the isolation of T gondii by MI could be isolated as few as 1 tachyzoite from tenfold serial dilution of T gondii with normal cat blood, respectively. In healthy domiciled cats, the toxoplasma-specific DNA and the parasite were detected and isolated in blood from 3 of 56(5.3%) cats by both PCR and MI, respectively. In the results of antibody test from the total 56 heads of healthy domiciled cats, the positive rates are 15(26.7%) by LAT and 19(33.9%) by IFAT. These results suggest that PCR detection of toxoplasma can be applied as a sensitive and specific diagnostic and research tool.

• Geomechanics and Engineering
• /
• v.13 no.1
• /
• pp.25-41
• /
• 2017

In recent years, the amount of sludge ash (SA) has considerably increased due to rapid urbanization and population growth. In addition, its storage in landfills induces environmental pollution and health problems. Therefore, its disposal in an environmentally friendly way has become more important. The main goal of this study is to investigate the reusability of sludge ash as an additive with polypropylene fiber (PF) to stabilize marginal sand based on the compressive strength performances from UCS tests. For this purpose, a series of UCS tests was conducted. Throughout the experimental study, the used inclusion rates were 10, 15, 20 and 30% for sludge ash and 0, 0.5 and 1% for polypropylene fiber by total dry weight of the sand+sludge ash mixture and the prepared samples were cured for 7 and 14 days prior to the testing. Freezing and thawing resistance of the mixture including 10% sludge ash and 0, 0.5 and 1% polypropylene fiber was also examined. On the basis of UCS testing results, it is said that sludge ash inclusion remarkably enhances UCS performance of sand. Moreover, the addition of polypropylene fiber to the admixtures including sand and sludge ash significantly improves their stress-strain characteristics and post-peak strength loss as well as UCS. As a result of this paper, it is suggested that sludge ash be successfully reused with polypropylene fiber for stabilizing sand in soil stabilization applications. It is also believed that the findings of this study will contribute to some environmental concerns such as the disposal problem of sludge ash, recycling, sustainability, environmental pollution, etc. as well as the cost of an engineering project.

• Food Science of Animal Resources
• /
• v.38 no.4
• /
• pp.806-815
• /
• 2018

This study was performed to isolate some strains of Bifidobacterium breve from fecal materials of neonates and to screen them for the biotransformation activity of converting linoleic acid into conjugated linoleic acid (CLA). Fecal samples were collected from twenty healthy neonates between 14 and 100 days old, and four hundred colonies were randomly selected from a Bifidobacterium selective transoligosaccharide medium. A duplex polymerase chain reaction technique was developed for the rapid and accurate molecular characterization of the B. breve strains that have been reported to show the species-specific characteristic of CLA production. They are identified by 16S ribosomal DNA, fructose-6-phosphate phosphoketolase encoding genes (xfp), and rapid pulsed field gel electrophoresis. Thirty-six isolates were identified as B. breve, and just two of the 12 neonates were harboring B. breve strains. Each isolate showed different CLA-producing ability in the spectrophotometric assay. All of the positive strains from the primary spectrophotometric assay were confirmed for their CLA-producing activities using gas-chromatographic analysis, and their conversion rates were different, depending on the strain isolated in this study. Some strains of B. breve were successfully isolated and characterized based on the CLA-producing activity, and further studies are necessary to characterize the enzyme and the gene responsible for the enzyme activity.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.7
• /
• pp.1084-1092
• /
• 2015

In the present work, the in vitro prebiotic activity of xylooligosaccharides (XOS) derived from corn cobs combined with Lactobacillus plantarum, a probiotic microorganism, was determined. These probiotics exhibited different growth characteristics depending on strain specificity. L. plantarum S2 cells were denser and their growth rates were higher when cultured on XOS. Acetate was found to be the major short-chain fatty acid produced as the end-product of fermentation, and its amount varied from 1.50 to 1.78 mg/ml. The antimicrobial activity of XOS combined with L. plantarum S2 was determined against gastrointestinal pathogens. The results showed that XOS proved to be an effective substrate, enhancing antimicrobial activity for L. plantarum S2. In vivo evaluation of the influence of XOS and L. plantarum S2, used both alone and together, on the intestinal microbiota in a mouse model showed that XOS combined with L. plantarum S2 could increase the viable lactobacilli and bifidobacteria in mice feces and decrease the viable Enterococcus, Enterobacter, and Clostridia spp. Furthermore, in the in vitro antioxidant assay, XOS combined with L. plantarum S2 possessed significant 2,2-diphenyl-1-picrylhydrazyl, 2,2'-azino-bis, and superoxide anion radical-scavenging activities, and the combinations showed better antioxidant activity than either XOS or L. plantarum S2 alone.

• Journal of Nutrition and Health
• /
• v.29 no.9
• /
• pp.934-942
• /
• 1996

This study was performed to investigate the influence of dietary fibers on the serum lipid level and bowel function in aged rats. Fiber sources of experimental diets were made from mugwort(M), butterbur(B), apple(A), sea mustard(S) by drying and milling. Each of fiber sources was mixed into the diet at the level of 5, 15% of diet. Sprague-Dawley strain, 13 month old male rats were divided into 9 groups by randomized complete block design : C, M5, B5, A5, S5, M15, B15, A15, S15. The animals were fed ad libitum each of experimental diets for 4 weeks. Control group showed lower food intake compare to the other groups. There were no significant difference between 5% groups and 15% groups in food intake. Fecal weight, dry fecal weight and fecal water content of control group were significantly lower than those of experimental groups, and fecal water content was increased by increasing level of dietary fibber. Apple group showed the lowest values, sea mustard group showed the highest. The shorter transit time was observed in the group of higher intake of dietary fiber. At the same level of dietary fiber, transit time of sea mustard group was shorter than the other groups. With increasing age, serum triglycerides, total cholesterol were increased and HDL-cholesterol was decreased. Fiber fed groups showed lower serum TG, TC and higher HDL-c level compare to the control group. Absorption rates of calcium, magnesium and phosphorus was tend to be lower in the group fed dietary fiber sources than control group. Mucosa weight and maltase activity in the small intestine were decreased by increasing age. As intake of dietary fiber increaed, mucosa weight in the small intestine was not different but maltase activity was decreased.