• 한국식품위생안전성학회지
• /
• 제7권2호
• /
• pp.123-135
• /
• 1992

This study was performed to investigate the term effect of fermented milk in drink on rats fed by cholesterol diet. 150 to 5-week-old male rates of Sprague-Dawley strain weer divided into six groups according to diet and content of fermented milk in drink. The first group served as normal control group fed by synthetic pellets of standard diet. The second , cholesterol control group, was treated with standard diet containing 1% of cholesterol and 500000IU/100g of vitamin D2. The other four groups. fermented milk groups, FM-25,FM-50 , FM 75 and FM-100 were treated with the cholesterol and vitamin D2 diet and supplied with 25%, 50%, 75%, 100% of fermented milk in drink , respectively. The animals were sacrificed for analysis in 3, 6, 9 and 12 months. Weight gain, diet intake , and drink consumption were significantly different among groups. Fermented milk reduced serum cholesterol to a significant effect (p<0.05) and significantly increased the ratio of high density lipprotein cholesterol to total cholesterol(p<0.05). Serum triglycerides were reduced to a smaller and less significant effect in fermented milk group. The aorta and liver of fermented milk showed slighter medial calcification and necrosis and milder fat degeneration than did the cholesterol control group. Supplementation of fermented milk may have a helpful effect on hypercholesteremia and atherosclerosis.

• 대한수의학회지
• /
• 제14권1호
• /
• pp.91-97
• /
• 1974

A total of 820 dairy cattle were examined formastitis by California mastitis test method and 181 dairy cattle were examined bacteriologically according to the method of Connecticut mastitis control program. The results obtained were as followings: 1. Milk samples from 1.231(38.1%) of 3,225 quarters and 568(69.3%) of 820 dairy cattle were positive for mastitis by California mastitis test method. 2. Among 181 cattle examined bacteriologically by the method of Connecticut mastitis control program 159(22.9%) quarters of 102(56.4%) cattle were infected. Clinical mastitis was found in 5 cattle. 3. Important causative organisms were found to de Staphylococcus aureus(44.8%), Streptococcus agalactiae(21.5%), and non-str, agalactiae Streptococcus(26.4%). Corynebacterium ssp., Pseudomonas spp., Coliforms and Yeasts were also occasionally found to be causative organisms. 4. Strains of Staphylococcus aureus isolated from bovine udders were tested for sensitivity to antibiotics. The rates of resistant strain were 13.7%, 11.8%, 8.8%, 5.9%, 100%, 4.9% and 4.9% for penicillin G, streptomycin, terramycin, erythromycin, chloramphenicol, ampicillin and kanamycin, respectively.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.25-26
• /
• 2007

At the time when nanostructured materials (NSMs) are becoming a major focus of materials research, the attention of researchers is turning more to their mechanical performance. In contrast with conventional coarse grained materials, which are either strong or ductile, but rarely both at the same time, it is expected that with NSMs both high strength and ductility can be achieved and confirmed by several experimental studies. In spite of the significant interest and efforts in the mechanical properties of NSMs, deformation mechanisms during plastic deformation as well as elastic deformation are not well established yet. In this talk, the deformation mechanisms of NSMs under various grain sizes, temperatures and strain rates were investigated. It is based on recent modelling that appears to provide a conclusive description of the phenomenology and the mechanisms underlying the mechanical properties of NSMs. Based on the theoretical model that provides an adequate description of the grain size dependence of elasticity and plasticity covering all grain size range from coarse down to the nanoscale, the tensile deformation response of NSMs, especially focusing on the deformation mechanisms was investigated.

• Geomechanics and Engineering
• /
• 제11권6호
• /
• pp.805-820
• /
• 2016

A fully coupled non-linear effective stress response finite difference (FD) model is built to survey the counter-intuitive recent findings on the reliance of pore water pressure ratio on foundation contact pressure. Two alternative design scenarios for a benchmark problem are explored and contrasted in the light of construction emission rates using the EFFC-DFI methodology. A strain-hardening effective stress plasticity model is adopted to simulate the dynamic loading. A combination of input motions, contact pressure, initial vertical total pressure and distance to foundation centreline are employed, as model variables, to further investigate the control of permanent and variable actions on the residual pore pressure ratio. The model is verified against the Ghosh and Madabhushi high acceleration field test database. The outputs of this work are aimed to improve the current computer-aided seismic foundation design that relies on ground's packing state and consistency. The results confirm that on seismic excitation of shallow foundations, the likelihood of effective stress loss is greater in deeper depths and across free field. For the benchmark problem, adopting a shallow foundation system instead of piled foundation benefitted in a 75% less emission rate, a marked proportion of which is owed to reduced materials and haulage carbon cost.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.417-420
• /
• 2006

The composition and structure of dendrite phase within $Zr_{76.11}Ti_{4.20}Cu_{4.51}Ni_{3.16}Be_{1.49}Nb_{10.53}$ bulk metallic glass (BMG) were confirmed by using an EPMA, XRD and TEM, respectively. The chief elements of dendrite phase were Zr-Ti-Nb and had a BCC structure. The thermal properties of this BMG have been then subsequently investigated by using a differential scanning calorimeter (DSC). The glass transition and crystallization onset temperatures were determined as $339.7^{\circ}C$ and $375.8^{\circ}C$ for this alloy, respectively. Mechanical properties have also been examined by conducting a series of uniaxial compression tests at various temperatures within supercooled liquid region under the strain rates between $10^{-4}/s$ and $3{\times}10^{-2}/s$. The deformation behavior of BMG composite within supercooled liquid region is similar to one of Vit-1 exhibiting amorphous single phase alloy. The flow stresses of BMG composite, however, are entirely higher than those of Vit-1 because dendrite phases are interfere with moving of atoms.

• 한국연소학회지
• /
• 제10권4호
• /
• pp.33-40
• /
• 2005

The propagation rates of advancing and retreating non-premixed edge flames in a slot-jet counterflow were measured as a function of strain rate for varying jet spacing, mixture strength, stoichiometric mixture fractions $(Z_{st})$ and Lewis numbers (Le). Methane and propane fuels were tested and nitrogen and carbon dioxide were used as inerts. As results, we could identify igniting fronts, retreating fronts, two total extinction limits, and short-length edge flames. A burner separation affected to a low extinction limit only. Regimes for advancing and retreating edges together with total extinction were mapped in terms of normalized flame thickness and heat loss factor for $CH_4/O_2/N_2$ mixtures. Edge flames for $Z_{st}$ > 0.5 behaved like a stronger mixture while for $Z_{st}$ < 0.5 showed deteriorated feature, because of relative locations of a non-premixed flame and intermediate species such as CO and $H_2$. Furthermore, due to the relative importance of heat loss, propagating speeds of edge flames were significantly enhanced in $CH_4/O_2/CO_2$ mixtures (Le < 1) demonstrating increasing stability limits. However $C_3H_8/O_2/N_2$ mixtures (Le > 1) showed opposite result.

• 한국세라믹학회지
• /
• 제46권3호
• /
• pp.225-228
• /
• 2009

The processing and characterization of ceramic nanocomposites, which produce bulk nanostructures with attractive mechanical properties, have been emphasized and introduced at Prof. Mukherjee's Lab at UC Davis. The following subjects will be introduced in detail in Part II, III, and IV. In Part II, the paper will describe a three-phase alumina-based nanoceramic composite demonstrating superplasticity at a surprisingly lower temperature and higher strain rate. The next part will show that an alumina-carbon nanotube-niobium nanocomposite produced fracture toughness values that are three times higher than that of pure nanocrystalline alumina. It was possible to take advantage of both fiber-toughening and ductile-metal toughening in this investigation. In the fourth section, discussed will be a silicon-nitride/silicon-carbide nanocomposite, produced by pyrolysis of liquid polymer precursors, demonstrating one of the lowest creep rates reported so far in ceramics at the comparable temperature of $1400^{\circ}C$. This was first achieved by avoiding the oxynitride glass phase at the intergrain boundaries. One important factor in the processing of these nanocomposites was the use of the electrical field assisted sintering method. This allowed the sintering to be completed at significantly lower temperatures and during much shorter times. These improvements in mechanical properties will be discussed in the context of the results from the microstructural investigations.

• 열처리공학회지
• /
• 제11권3호
• /
• pp.168-176
• /
• 1998

The mechanical properties of mechanically alloyed Al-4wt%Mg alloys dispersed with $MgAl_2O_4$ dispersoilds at room and elevated temperatures were investigated. The powders in steady state during mechanical alloying consisted of Mg-supersatu rated Al solid solution and $Al_4C_3$ which resulted from the reaction of Al with C in process control agent (methanol). The hot-extruded materials consisted of uniformly dispersed fine $MgAl_2O_4$, ${\gamma}-Al_2O_3$, $Al_2O_3$ and matrix with extremly fine substructure. Tensile specimens prepared from the extruded bars were tested at room temperature to $400^{\circ}C$ under different strain rates. The tensile strength of alloys at room temperature ranged from 500 to 594MPa. At elevated temperatures, the tensile strengths and elongations decreased with increasing temperature. Adding 3% $MgAl_2O_4$ to Al-4wt%Mg increased the tensile strength of 50MPa at rowan temperature and 20MPa at $400^{\circ}C$.

• Journal of Ecology and Environment
• /
• 제38권1호
• /
• pp.67-74
• /
• 2015

Three strains of the green microalga Botryococcus braunii (JJS, KCM, and KJD) were isolated from different water bodies in Korea and grown as batch cultures in the laboratory. The effects of different growth media and temperatures on the growth rate were investigated, as well as the effect of temperature on the total lipid content and lipid profile. All three strains had the highest growth rates in BG-11 medium and at $25^{\circ}C$. Maximal lipid production ($gL^{-1}$) was at $30^{\circ}C$ in the JJS strain and at $25^{\circ}C$ in the KCM and KJD strains. However, all the three strains produced the greatest percent dry weight of total lipids at $15^{\circ}C$ and had the lowest percent dry weight of total lipids at $25^{\circ}C$. In general, oleic acid, linolenic acid, and behenic acid were the most common fatty acids in all three strains. However, the three strains varied considerably in their fatty acid profiles at different culture temperatures.

• 한국수산과학회지
• /
• 제53권6호
• /
• pp.870-877
• /
• 2020

Twenty-three Bacillus cereus strain isolated from commercial jeotgal were investigated for 11 toxin genes and susceptibility to 25 different antimicrobials. The hemolytic enterotoxins hblA, hblC, and hblD were detected in 13.0%, and non-hemolytic enterotoxins nheA, nheB, and nheC were detected in 26.1%, 100%, and 100% of the isolates, respectively. The positive rates of cytK, entFM, becT, hlyII, and ces were 73.9%, 60.9%, 26.1%, 8.7%, and 0.0%, respectively. According to the disk diffusion susceptibility test, all of the strains studied were resistant to cefuroxime, followed by cefoxitin (78.3%), oxacillin (78.3%), ampicillin (69.6%), penicillin G (69.6%), and amoxicillin (65.2%). However, all the strains were susceptible to 11 other antimicrobials, including amikacin, chloramphenicol, and ciprofloxacin. The average minimum inhibitory concentrations of amoxicillin, ampicillin, and cefuroxime against B. cereus were 462.9, 235.0, and 135.0 ㎍/mL, respectively. These results highlight the need for sanitizing commercial jeotgal, and provide evidence to help reduce the risk of jeotgal contamination by antimicrobial-resistant bacteria.