• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.549-552
• /
• 2003

In this paper, an efficient architecture of a versatile Reed-Solomon (RS) decoder is designed, where the message length k as well as the block length n can be variable. The decoder permits 3-step pipelined processing based on the modified Euclid's algorithm(MEA). A new architecture for the MEA is designed for variable values of error correcting capability t. To maintain the throughput rate with less circuitry, the MEA block uses both the recursive and the overclocking technique. The decoder can decode a codeword received not only in a burst mode, but also in a continuous mode. It can be used in a wide range of applications due to its versatility. A versatile RS decoder over GF(2$^{8}$ ) having the error-correcting capability of up to 10 has been designed in VHDL, and successfully synthesized in an FPGA chip.

• 한국수소및신에너지학회논문집
• /
• 제6권1호
• /
• pp.43-52
• /
• 1995

Hydrogen storage alloy powder compacts were prepared by using automatic press, with PTFE as a binder. Hydrogen absorption and desorption characteristics and thermal conducting property of the compacts were studied using test hydrogen cylinder, comparing with bare alloy powder. The compacts showed better rate capability and activation characteristics than bare powder. Effective thermal conductivity and diffusivity of the compact bed were $1.0{\times}10^{-2}W/cmK$ and $2.0{\times}10^{-2}cm^2/S$, respectively, which were similar to that of bare powder bed. A good rate capability of the compacts was interpreted in terms of hydrogen permeation rather than thermal conductivity in the beds.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.513-516
• /
• 2001

In this study, the properties of MCMB anode Mixed with KCF were evaluated, KCF material was used as not only conducting agent but also active material, The Electirc conductivity of MCMB and KCF were 23.7S/cm and 45.8S/cm. Characteristics of anode with different KCF contents were the best effect at 2wt%. The 1st Ah efficiency of cells were increased with increment of KCF contents. The internal resistance and the rate capability were $1.59{\Omega}$ and 135mAh/g at 2C, The discharge capacity was gradually faded with the charge-discharge cycling to about 50th cycles.

• Journal of information and communication convergence engineering
• /
• 제5권3호
• /
• pp.194-199
• /
• 2007

In this paper, a slotted CDMA_ALOHA protocol with hybrid ARQ is proposed for the wireless CDMA communication networks. The proposed protocol combines the characteristics of the slotted ALOHA, CDMA, and the hybrid ARQ, in order to increase the throughput by reducing the number of retransmissions when the channel experiences heavy traffic. The main feature of the proposed protocol is the utilization of the forward error correction capability to correct errors that appear after the CDMA dispreading of the packets. The base station does not need to ask so often for retransmission of erroneous packets. It will request for retransmission only when the FEC capability is exceeded. The performance of the proposed protocol is analyzed by considering the packet collision probability as well as the bit error probability. The numerical results show that the system throughput is closely related to the bit error rate of the wireless link and the FEC coding rate.

• 한국세라믹학회지
• /
• 제54권3호
• /
• pp.249-256
• /
• 2017

We design Ge-Al multilayer assemblies as anode materials for Li-ion batteries, in which Ge and Al thin films are alternately deposited by a radio sputtering method. By sandwiching Ge layers between Al layer, the cyclability, rate capability, and capacity of Ge are improved significantly. The success of the Ge-Al multilayer is attributed to the Al films. To maintain the integrity of electrical contact, Al acts as an elastic layer, which can expand or shrink with the Ge film upon lithiation or delithiation. In addition, the presence of the Al film on the surface can prevent direct contact of Ge and electrolyte, thereby reducing the growth of a SEI layer. Importantly, with high electrical and ionic conductivities, the Al film provides efficient electrical and ionic routes for electrons and Li-ions to access the Ge film, promoting a high specific capacity and high rate capability for Ge.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.513-516
• /
• 2001

In this study, the properties of MCMB anode Mixed with KCF were evaluated. KCF material was used as not only conducting agent but also active material. The Electric conductivity of MCMB and KCF were 23.7S/cm and 45.8S/cm. Characteristics of anode with different KCF contents were the best effect at 2wt%. The 1st Ah efficiency of cells were increased with increment of KCF contents. The internal resistance and the rate capability were 1.59Ω and 135mAh/g at 2C. The discharge capacity was gradually faded with the charge-discharge cycling to about 50th cycles.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.294-295
• /
• 2007

$LiNi_{1/3}Mn_{1/3}Co_{1/3}O_2$ material was surface modified with Zr-phosphate. Scanning electron microscope, energy dispersive spectroscopy and electrochemical studies indicate that surface modification improve the rate capability. Electrochemical studies were performed by assembling 2032 coin cells with lithium metal as an anode.

• 한국정보과학회논문지:정보통신
• /
• 제29권5호
• /
• pp.543-552
• /
• 2002

Wireless Application Protocol(WAP) 포럼에서는 무선 환경의 특성에 적합하도록 HyperText Transfer Protocol(HTTP)를 수정 보완한 Wireless Session Protocol(WSP)를 제안하였다 WSP는 무선 구간에서의 프로토콜 성능을 상당부분 개선하였고, 무선 환경을 고려한 다양한 서비스를 제공하고 있다. 본 논문에서는 기존의 WSP에 프로토콜 메시지 압축 기능을 추가하여 기존 프로토콜의 성능을 더욱 개선하였다. 그리고, 기존의 WSP 구현물과 프로토콜 메시지 압축 기능을 추가한 WSP+ 구현물의 성능을 측정하고 비교하였다. 그 결과 본 논문에서 제안한 프로토콜 메시지 압축기능은 기존 WSP에 비하여 응답 트래픽을 약 45% 감소시켰다. 그리고, 비트 오류 발생률이 $10^{-4}$인 실험 환경에서 패킷 손실률과 트랜잭션당 시간 지연을 40% 이상 개선하였다. 이러한 측정 결과에서 알 수 있듯이, 프로토콜 메시지 압축 기능은 무선 구간에서 전달되는 메시지의 크기를 줄임으로써 패킷의 손실률을 낮추어 트랜잭션 계층에서의 메시지 재전송 횟수를 줄이고 트랜잭션당 시간 지연을 단축하였다.

• 상하수도학회지
• /
• 제31권6호
• /
• pp.567-575
• /
• 2017

It is not cost effective to raise the density of catch basins in preparation for heavy rainfall in terms of construction and maintenance. Our researchers have developed the new catch basin for increasing interception capacity of runoff with internal filtration structure. To compare interception capacity of an existing catch basin with the invented catch basin, a hydraulic experiment device with 4% of road gradients and 0.2% of road gradients was constructed. For runoff conditions of 4.4 l/s, 6.7 l/s and 10.4 l/s, capability of runoff and separation capability of debris (sand and leaves) were evaluated. As the main experimental results, the effectiveness of the developed catch basin has been verified with an increase in interception rate of approximately 22% for the runoff of 6.7 l/s as heavy rainfall. However, the results of invented catch basin showed only 4.5% of settlement rate of debris regarding sand. Therefore, the authors proposed an improved tilted screen structure additionally. After reviewing the performance of improved catch basin, application of the invented catch basin is expected to drain runoff effectively when it is applied to the faulty road drainage section.

• 항공우주시스템공학회지
• /
• 제17권5호
• /
• pp.19-27
• /
• 2023

본 연구에서는 유한요소해석을 이용하여 터빈 케이스의 컨테인먼트 성능 평가를 수행하였다. 충격 하중을 받는 구조물의 경우 변형률 속도가 증가함에 따라 유동 응력이 증가하기 때문에 충격 거동을 해석하기 위해서는 변형률 속도가 필수적으로 고려되어야 한다. 본 연구에서는 3가지 재료 모델(Cowper-Symonds, Johnson-Cook, Modified Johnson-Cook)을 충격 해석에 적용하고자 하였다. 해석에 적용된 재료 모델을 검증하기 위해서 알루미늄 6061 평판에 대한 충격 시험을 진행하였다. 실험과 해석 결과를 비교, 분석한 결과 Modified Johnson-Cook 모델이 가장 적은 오차를 보였다. 끝으로 해당 재료 모델을 터빈 케이스의 컨테인먼트 성능 평가에 적용하여 블레이드의 초기 속도에 따른 관통 여부와 충돌 부위에서 발생한 응력과 변형률을 제시하였다.