• Journal of Dental Anesthesia and Pain Medicine
• /
• 제16권2호
• /
• pp.111-116
• /
• 2016

Background: Inferior alveolar nerve block (IANB) of the mandible is commonly used in the oral cavity as an anesthetic technique for dental procedures. This study evaluated the success rate of the first IANB administered by dental practitioners. Methods: Volunteer dental practitioners at Mahidol University who had never performed an INAB carried out 106 INAB procedures. The practitioners were divided into 12 groups with their advisors by randomized control trials. We recorded the success rate via pain visual analog scale (VAS) scores. Results: A large percentage of the dental practitioners (85.26%) used the standard method to locate the anatomical landmarks, injecting the local anesthetic at the correct position, with the barrel of the syringe parallel to the occlusal plane of the mandibular teeth. Further, 68.42% of the dental practitioners injected the local anesthetic on the right side by using the left index finger for retraction. The onset time was approximately 0-5 mins for nearly half of the dental practitioners (47.37% for subjective onset and 43.16% for objective onset), while the duration of the IANB was approximately 240-300 minutes (36.84%) after the initiation of numbness. Moreover, the VAS pain scores were $2.5{\pm}1.85$ and $2.1{\pm}1.8$ while injecting and delivering local anesthesia, respectively. Conclusions: The only recorded factor that affected the success of the local anesthetic was the administering practitioner. This reinforces the notion that local anesthesia administration is a technique-sensitive procedure.

• 한국정밀공학회지
• /
• 제25권11호
• /
• pp.83-89
• /
• 2008

The Effect of Space Velocity(SV) on NOx conversion rate was performed to develop NOx reduction after-treatment system. SV is calculated from engine exhaust gas volume and SCR catalyst volume. Found the Urea injection duty of maximum efficiency for NOx conversion if increase SV, NOx Conversion rate is down. Especially, when SV is more than $110,000h^{-1}$, NOx conversion rate decrease suddenly. Same case, if SV is lower than $40,000h^{-1}$, NOx conversion rate is down. Also, the characterization of Urea-SCR system was performed. Three candidate injectors for injecting Urea were tested in terms of 속 injection rate and NOx reduction rate. The performances of SCR catalytic converter on temperature were investigated. The performance of Urea-SCR system was estimated in the NEDC test cycle with and without EGR. It was found that nozzle type injector had high NOx conversion rate. SCR catalytic converter had the highest efficiency at the temperature of $350^{\circ}C$. EGR+Urea-SCR system achieved NOx reduction efficiency of 73% through the NEDC test cycle.

• 대한약침학회지
• /
• 제6권2호
• /
• pp.29-43
• /
• 2003

9Objective : We carried out this experimental study in order to investigate the effect of Chaenomelis Fructus(木瓜) extract and herbal-acupuncture on the arthritis induced by injecting Freund's complete adjuvant Method : 1. We categorized SD-rats into five groups as followings. (1) Control: Without any Treat (2) Treat I: treated by acupuncture (3) Treat II: treated by drinking 5% saline (4) Treat III: treated by drinking Chaenomelis Fructus(木瓜) extract (5) Treat IV: treated by Chaenomelis Fructus(木瓜) herbal-acupuncture 2. We established ten items for decision of experimental results as followings Edema rate, Pain endurance, WBC, Hemoglobin, Platelet, Total protein, Albumin, Globulin, RA factor, CRP Results : The groups that showed significant effects compared with Contol group were explained as followings. 1. Edema rate : Treat I , Treat III 2. Pain endurance : Treat I, Treat IV 3. WBC : Treat IV 4. Hemoglobin : Treat III 5. Plat99elet : Treat IV 6. Total protein : Treat I, Treat IV 7. Albumin : None 8. Globulin : Treat I, Treat IV 9. RA factor : Treat I, Treat IV 10. CRP : Treat IV Conclusion : Observing above experimental results, we can guess that the effects of acupuncture and Chaenomelis Fructus(木瓜) herbal-acupuncture on Freund's adjuvant arthritis are more superior than other ways. In addition, we can find that the latter is more better than the former in effect by two items(platelet, CRP).

• 전기전자학회논문지
• /
• 제11권3호
• /
• pp.117-121
• /
• 2007

20 GHz and 40 GHz micro/millimeter-wave photonic pulse trains have been generated from a fiber ring laser with a semiconductor optical amplifier (SOA) by injecting 2 GHz gain-switched Fabry-Perot laser diode (GS-FPLD) output. To achieve efficient cross-gain modulation in the SOA at 20 GHz and 40 GHz, individual lasing modes of the 2 GHz GS-FPLD output separated to 25 and 50 picoseconds respectively by passing dispersion compensating fibers.

• 대한핵의학회지
• /
• 제3권2호
• /
• pp.29-31
• /
• 1969

The author observed the uptake rate of $^{131}I$ by the thyroid gland, and disappearing rate of the $^{131}I$ at the site of the intradermal injection of 0.1ml of 5mCi of $^{131}I$ in normal physiologic saline on 20 patients with hyperthyroidism and on 15 patients with hypothyroidism who visited the Radioisotpe department of the Pusan National University Hospital during the period from January 1967 to Aug. 1968, and during the same period 15 normal persons were examined by the same methods and found. The results were as follows: (1) The disappearance rate of $^{131}I$ at the injected site was highest in the cases of hyperthyrodism. The next highest results were obtained in the normal cases. The lowest results were obtained in the cases of hypothyroidism. (2) The uptake rate of the thyroid gland after intradermal injection of the $^{131}I$ was highest in the cases of hyperthyroidism and the next highest results were obtained in the cases of nomal findings. The lowest results were obtained in the cases of hypothyroidism. (3) In conclusion, the intradermal method of injecting $^{131}I$ by the author is a useful way of testing the function of the thyroid gland.

• 한국환경보건학회지
• /
• 제29권3호
• /
• pp.65-71
• /
• 2003

The injection concentration of corrosion inhibitor increases under the pH 7, temperature of 2$0^{\circ}C$, and alkalinity of 35 mg/l (as CaCO$_3$), the corrosion rate gradually decreased. When the corrosion inhibitor of 10 mg/l is injected, the corrosion rate for carbon steel pipe, galvanized steel pipe, and copper pipe reduces for 37, 66 and 61 % respectively that it is more efficient on galvanized steel pipe and copper pipe. As a result of examination of corrosion rate at pH 6, 7, and 8 when injecting 10 mg/l of corrosion inhibitor under the conditions of 2$0^{\circ}C$ in water temperature and 35 mg/l (as CaCO$_3$) in alkalinity, the efficiency of the corrosion inhibitor increases as the pH increases. For carbon steel pipe, it does not show much a difference with the change of the pH condition, but galvanized steel pipe and copper pipe clearly show the corrosion rate depending on the change of the pH condition. The efficiency of corrosion inhibitor is low as the concentration of residual chlorine is high, but it does not show a great influence at 0.4 mg/l or less. For each pipe type, in the case of carbon steel pipe, the range of increase of corrosion speed following the residual chloride is higher than the other pipe types. In the meantime, the effect following the residual chlorine in copper pipe is low.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.529-534
• /
• 2008

Interzonal air movements are important to characterize overall ventilation performance of complicated multi-zone buildings. Tracer gas techniques are widely used to measure ventilation rates, ventilation effectiveness, and interzonal air movements. Depending on the number of gases used, they are divided into single and multi tracer gas methods. This paper deals with the comparison of the tracer gas methods in measuring air exchange rate between rooms. Experiments have been conducted in a simple two-room model with known airflow rates. In multi-gas procedure, the concentration decays of two tracer gases, i.e SF6 and R134a are measured after simultaneous injections in each room. The single tracer gas method is also applied by injecting SF6 gas with a time lag between two rooms. The data reduction procedures are developed to obtain the interzonal airflow rate using the matrix inversion, and various data manipulation methods are tested, such as data shift, interpolation, and smoothing. Uncertainty for each airflow rate is investigated depending on the parameters based on the setting values.

• 설비공학논문집
• /
• 제21권11호
• /
• pp.606-612
• /
• 2009

Interzonal air movements are important to characterize overall ventilation performance of complicated multi-zone buildings. Tracer gas techniques are widely used to measure ventilation rates, ventilation effectiveness, and interzonal air movements. Depending on the number of gases used, they are divided into single and multi tracer gas methods. This paper deals with the comparison of the tracer gas methods in measuring air exchange rate between rooms. Experiments have been conducted in a simple two-room model with known airflow rates. In multi-gas procedure, the concentration decays of two tracer gases, i.e SF6 and R134a are measured after simultaneous injections in each room. The single tracer gas method is also applied by injecting SF6 gas with a time lag between two rooms. The data reduction procedures are developed to obtain the interzonal airflow rate using the matrix inversion, and various data manipulation methods are tested, such as data shift, interpolation, and smoothing. Uncertainty for each airflow rate is investigated depending on the parameters based on the setting values.

• Fisheries and Aquatic Sciences
• /
• 제9권2호
• /
• pp.75-82
• /
• 2006

We evaluated the utility of applying isozyme analysis and two tagging methods, visible implant fluorescent elastomer (VIE) injection and uropod-cutting, to monitor the effects of releasing nursery-reared fleshy prawn (Fenneropenaeus chinensis) into natural habitat in Korea. One hundred thousand farmed prawns (70 mm long) were tagged by clipping off the outer left uropod and injecting them with VIE. This marked seed population was released at Muchangpo, Korea, on 11 and 19 July 2002. Two months later, total catch and catch per unit effort (CPUE) at three locations (Hongwon, Muchangpo, and Anmyundo) were determined. Total catch and CPUE increased nearly 18% over the previous year in Hongwon and Muchangpo. The mixing rate, estimated by uropod regeneration pattern, was 0.33% at Hongwon, 0.53% at Muchangpo, and 0.21% at Anmyundo. The recapture rate was about 3.5%. Isozyme analysis confirmed that the mixing rate was highest at Muchangpo. Moreover, fleshy prawns from Muchangpo were genetically most related to the seed population, indicating that the released prawns had largely remained near the released site. We also confirmed that isozyme genes are valuable as genetic markers for qualitative analyses of a released seed population.

• Korean Chemical Engineering Research
• /
• 제60권2호
• /
• pp.300-307
• /
• 2022

매우 짧은 펄스 폭의 X선 자유전자 레이저(XFEL)를 이용한 시간 분해능 연속 펨토초 결정학(time-resolved serial femtosecond crystallography, TR-SFX)기법에서 반응 물질과 생체분자 결정 샘플간의 혼합률(mixing rate)과 결정 샘플과 X선 레이저 간의 충돌률(hit rate)은 생체분자의 시분해 구조 변화에 대한 정확한 이미지 획득 및 효율적인 샘플소비와 같은 TR-SFX의 분석 성능을 결정짓는 핵심인자이다. 본 연구에서는 극초단 내 일어나는 생체분자의 시분해 구조 변화 해석을 위해 초고속 믹싱 기능을 가짐과 동시에 공압 기반의 주문형 액적 젯팅이 가능한 두 가지 다른 방식의 샘플 전달시스템을 고안하였다. 한 방식은 이중 노즐을 통해 토출된 액적의 고속 충돌에 유발된 관성 믹싱을 기반으로 하고 있으며, 다른 방식은 마이크로믹서가 내장된 공압 젯팅을 기반으로 하고 있다. 먼저, 이중 노즐을 통해 토출된 액적의 충돌에 대한 동적 거동 및 액적 내부 관성 유동에 대한 믹싱에 대한 실험 및 수치해석적 연구를 수행하였다. 다음으로 마이크로믹서가 내장된 공압 젯팅 시스템의 성능을 유사한 방법을 통해 평가하였다. 본 연구에서 개발한 샘플 전달시스템은 질환을 유발하는 특정 단백질들의 기작을 규명하거나, 항체 의약품과 신약 후보 물질 탐색하는 데 있어 필수적인 3차원 생체 분자 구조분석 연구에 매우 유용하게 활용될 수 있을 것이다.