• The Korean Journal of Malacology
• /
• v.20 no.1
• /
• pp.35-43
• /
• 2004

To know the effects on temperature and body size on the clearance rate (CR) of a small tidal flat bivalve, Coecella chinensis, laboratory experiments were performed with 20 individuals of different sizes (ranging from 7 to 25 mm) at 3 different temperatures (10, 15, $20^{\circ}C$). The relationship between body size and CR was determined by an allometric equation. The CR of C. chinensis varied greatly ranging from 0.003 to 0.103 L/individual/hr. Both temperature and body size affected significantly on the CR of C. chinensis. The CR at $20^{\circ}C$was 1.5 times higher than that at $15^{\circ}C$ and 2.8 times than $10^{\circ}C$. The temperature coefficient ($Q_10$) between 10 and $15^{\circ}C$ was higher than that between 15 and $20^{\circ}C$, which indicates that C. chinensis changes its CR more rapidly in lower temperature range. As body size increased, the CR increased more than 10-fold at all temperatures. The CR relative to flesh dry weight (FDW) were fitted well to the power function: CR = a ${\times}$ $(FDW)^b$. The exponent value (b) of the fitted equation ranged from 0.64 to 0.70, which are similar to those of other bivalves. The weight-specific CR ($CR_w$) was still affected by body size (p < 0.05). This implies that smaller individuals require more energy per unit biomass for growth, and the energy requirement for growth decreases as body size increases.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.3
• /
• pp.51-55
• /
• 2005

This study addresses the contamination sensitivity test of a typical fuel pump for an automotive vehicle. The objective of the study is to find the contamination sensitivity coefficient of a fuel pump on specific contaminant particle sizes so that an optimal fuel filter could be selected. To achieve the objective, the degradation of discharge flow rate of the fuel pump is measured under the experiments of various contaminants size ranges of ISO test dust up to $80\;{\mu}m$. The fundamental theory of contamination sensitivity is introduced and the contamination sensitivity coefficients are estimated using the experimental data. Maximum contamination sensitivity coefficient of $5\chi\;10^{-6}\;L/min{\cdot}Ea$ is found in the contaminant size range of $40\;{\mu}m\~50\;{\mu}m$. The magnified picture of the surface of vane disc reveals that the abrasive wear is the principal cause of discharge flow rate degradation. Hence, this study reveals that a high efficiency filter for contaminant particles especially in the size range of $30\;{\mu}m\~70\;{\mu}m$ especially should be used to maintain the service life of the fuel filter.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.689-698
• /
• 2020

The aim of this article is to determine the influence of factors on the capital structure of construction companies listed on the Hanoi Stock Exchange. The data of the article were collected and calculated from the financial statements of 54 construction companies listed on Hanoi Stock Exchange from 2012 to 2019. With the application of E-view software in quantitative analysis to build panel data regression model (panel data), the article has built a regression model to determine the relationship of intrinsic factors affecting the capital structure of construction companies listed on Hanoi Stock Exchange. In the study, dependent variable is capital structure, determined by the debt-to-equity ratio. Profitability, coefficient of solvency, size, loan interest rate, structure of tangible assets, and growth are independent variables. The results showed that the two factors of growth and firm size positively affect the capital structure, the profitability factor has the opposite effect on capital structure. Factors of short-term debt solvency, average loan interest rate and tangible asset structure have no correlation with capital structure. The findings of this article are useful for business administrators, helping business managers make the right financial decisions to make capital structure decisions in their own conditions.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.6
• /
• pp.102-108
• /
• 2004

This study addresses the contamination sensitivity test of a typical fuel pump for automotive vehicle. The objective of the study is to find the contamination sensitivity coefficient of fuel pump on specific contaminant particle sizes so that optimal fuel filter could be selected. To achieve the objective, the degradation of discharge flow rate of fuel pump was measured under the experiments of various contaminants size ranges of ISO test dust up to 80${\mu}{\textrm}{m}$. The fundamental theory of contamination sensitivity was introduced and the contamination sensitivity coefficients were estimated using the experimental data. Maximum contamination sensitivity coefficient of $5{\times}10^{-6}$ L/minㆍEa was found on the contaminant size range of 40${\mu}{\textrm}{m}$∼50${\mu}{\textrm}{m}$. The magnified picture of the surface of vane disc revealed that the abrasive wear was the principal cause of discharge flow rate degradation. Hence, this study revealed that high efficiency filter on the contaminant particle size range of 30${\mu}{\textrm}{m}$∼70${\mu}{\textrm}{m}$ especially should be used to maintain the service lift of the fuel filter.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.73-78
• /
• 2002

Ships and ocean structures are generally under random loading. Various type of variable-amplitude loading affects fatigue crack growth and fatigue life. However interaction effects due to irregularity of loading including random loading have not explained exactly and it is difficult to examined fatigue crack growth behaviour and fatigue life for this reason. Therefore in this paper crack growth tests with constant-amplitude loading including a single overload were conducted to measure plastic zone size near crack tip of DENT specimen. And the observed plastic zone sized were discussed in terms of crack growth rate. As a result of this the effect the plastic rue size due to the overload is examined on the effect on crack growth rate and, consequently, fatigue life.

• Journal of Industrial Technology
• /
• v.21 no.B
• /
• pp.141-147
• /
• 2001

For the preparation of calcium carbonate particles from aqueous $Ca(OH)_2$ slurry, carbonation reaction of aqueous $Ca(OH)_2$ slurry was carried out by batch method the $CO_2$ into reactor filled with aqueous slurry of $Ca(OH)_2$. The concentration of $Ca(OH)_2$ varies from 1.00 to 7.00wt%, reactor temperature at 20 and $40^{\circ}C$, and reactor pressure from atmospheric pressure to $6.0kg_f/cm^2$. Crystal structure of calcium carbonate was of calcite, the particle size were about $0.05{\sim}2.0{\mu}m$, and the particle shape was cubic and spindle. When reactor temperature was higher, particle size of calcium carbonate was bigger and particle shape was varied, but reaction rate was increased. When reactor pressure was higher, particle size of calcium carbonate was smaller, particle shape was cubic, and reaction rate was increased.

• The Korean Journal of Ecology
• /
• v.18 no.4
• /
• pp.493-502
• /
• 1995

Nodulation phenology in relation to plant phenology, vertical distribution of nodul and root biomass in different soil, correlation between nodule and root size, and nitrogen mineralization around the rhizosphere by ion-exchange resin bag buried at 10 cm of soil were studied in Elaeagnus nmbellata (autumn-olive) stand, Korea. Nodulation appeared from spring to autumn and nodule phenology was coincided with the timing of root activity rather than that of foliation. Nodul size increased in proportion to the root size. In the sand dune with the lower root biomass, nodule appeared up to 80 cm deep in soil and the nodule biomass was 1,070 kg/ha, which was the highest value reported for several actinorhizal plants in the temperate regions. It is suggested that nodule distribution and production are mainly influenced by soil aeration among environmental factors. The higher ammonification or lower nitrification rate contrasted markedly with the earlier studies that reported lower ammonification or higher nitrification in actinorhizal plant soil. Nitrogen mineralization rate around the rhizosphere with root and nodule was characterized by higher nitrification rate than that in the control soil without root and nodule.

• The Research Journal of the Costume Culture
• /
• v.14 no.2
• /
• pp.286-298
• /
• 2006

The purpose of this study is to find the proper width of fabric which can bring high efficiency on productivity. We focus on the marking method by comparing and analyzing the marking efficiency of flare skirt. This study employs 4 criteria to mark the flare skirt, which are angle, location, width, and direction, respectively. There can be 3 different angles$(180^{\circ},\;270^{\circ},\;360^{\circ})$, and 2 different locations(the center line and the middle of the pattern) according to fixing of the warp line of the fabric. Also, width can be classified into 2 groups(110cm, 150cm), and marking direction can be grouped into 2(one direction marker and one direction per each size marker). These 4 criteria make $24(3{\times}2{\times}2{\times}2)$ cases for this study. Main findings are follows. Fist, the skirt with the 150cm width has higher efficiency rate than that of 110cm. Second, fixing the warp line at the center line has higher efficiency rate than that in the middle. Finally, per size marker has much higher efficiency than the just direction marker. In sum, we find that 150cm width with the center warp line and per size marker brings the highest efficiency rate.

• ETRI Journal
• /
• v.27 no.2
• /
• pp.227-230
• /
• 2005

A specific anthropomorphic mannequin (SAM) model was used to investigate the relation between local specific absorption rate (SAR) and head size. The model was scaled to 80 to 100% sized models at intervals of 5%. We assumed that the shell of the SAM model has the same properties as the head-equivalent tissue. Five handsets with a monopole antenna operating at 835 MHz were placed in the approximate cheek position against the scaled SAM models. The handsets had different antenna lengths, antenna positions, body sizes, and external materials. SAR distributions in the scaled SAM models were computed using the finite-difference time-domain method. We found that a larger head causes a distinct increase in the spatial peak 1-voxel SAR, while head size did not significantly change the peak 1-g averaged-SAR and 10-g averaged-SAR values for the same power level delivered to the antenna.

• The Plant Pathology Journal
• /
• v.21 no.4
• /
• pp.377-382
• /
• 2005

Infection rate of Chrysanthemum stunt viroid (CSVd) in 64 commercial chrysanthemum cultivars cultivated in Korea ranged from 9.7 to 66.8$\%$. Symptoms on leaves of CSVd-infected chrysanthemum included yellow spots, chlorosis, vein clearing, vein bending and crumpling. CSVd induced flower malformation in 'Scot', color change in 'Sharotte', and color breaking in 'Sharon'. CSVd caused reduction of plant height, leaf size, flower size and the flowers number by $32-50\%,\;26-35\%$, $14-36\%\;and\;14-75\%$, respectively. In conclusion, CSVd affected plant height, leaf size and flower quality in chrysanthemum plants.