• Korean Journal of Animal Reproduction
• /
• v.23 no.2
• /
• pp.141-148
• /
• 1999

This study was to test whether the viability of bovine hatched blastocysts (HBs) can be maintained after vitrification and thawing. The HBs were produced in vitro at Day 9 and Day 10 after IVF, and they were classified to small (S-HBs; ø$\leq$300 ${\mu}{\textrm}{m}$) and large(L-HBs; ø＞300 ${\mu}{\textrm}{m}$) on the basis of embryo diameter using eyepiece micrometer. As freezing solution, we used EFS35 which consisted of 35% ethylene glycol (EG), 18% ficoll, 0.3 M sucrose and 10% FBS added in mDPBS. Vitrification was taken by two-step method, the HBs were equilibrated in 10% EG for 5 minutes and then shortly exposed in EFS35 and plunged into L$N_2$for 30~45 sec. After thawing, the survival rates were assessed by the re-expansion of the blastocoel during 2 h and 16 h of culture. The results obtained in these experiments were summarized as follows; 1) When the blastocysts(40.8%) recovered at Day 8 after IVF were further cultured for 24 h(Day 9 after IVF) and 48 h(Day 10 after IVF), the rates of HBs were 20.5% and 6.7%, respectively. Also, the total cell number of HBs on Day 9 was significantly higher than that of HBs on Day 10 (p＜0.01). 2) When the effects of freezing solution to the survival of Day 9 L-HBs were examined, the rate of vitrified group (75.7%) was significantly lower than 100% of control and exposed group(p＜0.05). 3) When the survival rates of vitrified HBs according to size and developmental age were examined, the data of L-HBs (75.5%) and S-HBs(63.6%) on Day 9 were slightly higher than those of L-HBs(64.3%) and S-HBs(60.7%) on Day 10. 4) Also, when the in vitro survival of Day 9 HBs was evaluated under different culture condition after thawing, the result in culture medium only (79.3%) was significantly higher than 43.2% in co-culture group (p＜0.05). These results demonstrated that bovine HBs can be successfully cryopreserved by two-step vitrification method using EFS35.

• Korean Journal of Ecology and Environment
• /
• v.55 no.1
• /
• pp.10-18
• /
• 2022

This study analyzed the relationship between the community structure of benthic macroinvertebrates and habitat changes in open estuaries among the sites included in the national estuary monitoring program. The estuary survey was conducted under the "Guidelines for Investigation and Evaluation of Biometric Networks" and classified by sea area, 80 places in the East Sea, 102 places in the South Sea, and 19 places in the West Sea were investigated. In a total of 201 open estuaries, benthic macroinvertebrates were identified with 4 phyla, 9 classes, 41 orders, 139 families, 269 species and 196 species in the East Sea, 182 species in the South Sea, and 90 species in the West Sea. The highest population densities were Insecta in the East Sea, the Malacostraca in the South Sea, and the Annelida in the West Sea. Through SIMPER analysis, species contributing to the similarity of benthic macroinvertebrates communities in each sea area were identified. Some species greatly influenced the similarity of clusters. The benthic community in the East Sea was affected by the salinity, so the contribution rate of freshwater species was high. On the other hand, the benthic communities of the South and West Seas showed species compositions are influenced by the substrate composition. As results, the benthic macroinvertebrate community in Korean estuaries was impacted by salinity and substrate simultaneously, and the close relationship with geographical distance was not observed. The result of this study is expected to be used to respond to environmental changes by identifying and predicting changes in the diversity and distribution of benthic macroinvertebrates in Korea estuaries.

• Korea Trade Review
• /
• v.42 no.2
• /
• pp.145-174
• /
• 2017

Recently, due to the worsening global economic recession, Korea which is a small, export-oriented economy has decreased exports and the domestic economy also continues to stagnate. Therefore, for continued growth of our economy through export growth, we need to analyze the validity of export support system such as export insurance and prepare ways to expand exports. This study is to investigate the effects of Export Insurance on the exports of SMEs as well as LEs. For this purpose, this study conducted Time Series Analysis using data such as export, export insurance acquisition, export price index, exchange rate, and coincident composite index(CCI). First, as a result of the Granger Causality Test, the exports of LEs has found to have a causal relationship with the CCI, and CCI is to have a causal relationship with the short-term export insurance record. Second, the results of VAR analysis show that the export insurance acquisition result and the export price index have a positive effect on the exports of LEs, while the short - term export insurance has a negative effect on the exports of LEs. Third, as a result of variance decomposition, the export of LEs has much more influenced for mid to long term by the short-term export insurance acquisition compared to SMEs. Fourth, short-term export insurance has a positive effect on exports of SMEs. In order to activate short-term export insurance against SMEs, it is necessary to expand support for SMEs by local governments. This study aims to suggest policy implications for establishing effective export insurance policy by analyzing the effects of export insurance on the export of SMEs as well as LEs. It is necessary to carry out a time series analysis on the export results according to the insurance acquisition results by industry to measure the export support effect of export insurance more precisely.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.2335-2347
• /
• 2023

As medical facilities are usually built at urban areas, special concrete aggregates and evaluation methods are needed to optimize the design of concrete walls by balancing density, thickness, material composition, cost, and other factors. Carbon treatment rooms require a high radiation shielding requirement, as the neutron yield from carbon therapy is much higher than the neutron yield of protons. In this case study, the maximum carbon energy is 430 MeV/u and the maximum current is 0.27 nA from a hybrid particle therapy system. Hospital or facility construction should consider this requirement to design a special heavy concrete. In this work, magnetite is adopted as the major aggregate. Density is determined mainly by the major aggregate content of magnetite, and a heavy concrete test block was constructed for structural tests. The compressive strength is 35.7 MPa. The density ranges from 3.65 g/cm³ to 4.14 g/cm³, and the iron mass content ranges from 53.78% to 60.38% from the 12 cored sample measurements. It was found that there is a linear relationship between density and iron content, and mixing impurities should be the major reason leading to the nonuniform element and density distribution. The effect of this nonuniformity on radiation shielding properties for a carbon treatment room is investigated by three groups of Monte Carlo simulations. Higher density dominates to reduce shielding thickness. However, a higher content of high-Z elements will weaken the shielding strength, especially at a lower dose rate threshold and vice versa. The weakened side effect of a high iron content on the shielding property is obvious at 2.5 µSv=h. Therefore, we should not blindly pursue high Z content in engineering. If the thickness is constrained to 2 m, then the density can be reduced to 3.3 g/cm³, which will save cost by reducing the magnetite composition with 50.44% iron content. If a higher density of 3.9 g/cm³ with 57.65% iron content is selected for construction, then the thickness of the wall can be reduced to 174.2 cm, which will save space for equipment installation.

• Journal of agricultural medicine and community health
• /
• v.48 no.2
• /
• pp.103-117
• /
• 2023

Objectives: This study aims to reveal the relationship between social relations and physical activity in the young-old and old-old elderly. Methods: Data from 2020 National survey of Older Koreans were used, and a total of 10,097 subjects over the age of 65 were included in analysis. The dependent variable was physical activity, and the independent variables were social relations barrier and motivational factors. x²-test and binary logistic regression were performed for data analysis. Results: The physical activity rate in the elderly were 40.8% in the young-old and 29.2% in the old-old. The socio-demographic characteristics affecting physical activity were the young-old elderly were sex, residential area, employment status and household income, and the old-old elderly were sex, age, residential area, education level and household income. The social relations barrier factors affecting physical activity were the young-old elderly were number of close friends, family care, exercise information search and video viewing, and the old-old elderly were household type, number of close friends, participation in exercise education, exercise information search and video viewing. The social relations motivational factors affecting physical activity were the young-old elderly were call with children/relative/friend, participation in sports activity, access time from home to parks, and the old-old elderly were call with children/relative/friend, participation in sports activity, satisfaction with green spaces. Conclusions: It was found that social relations barrier and motivational factors of the elderly are important factors to consider when developing physical activity promotion strategy, and there are also difference between the age of the elderly.

• Journal of Korean Academy of Dental Administration
• /
• v.5 no.1
• /
• pp.31-37
• /
• 2017

Recently interest in infection control is increasing in hospitalsnfection control has become more important in the overall health care practiceental hospital also requires thorough infection control. There are various kinds of vectormedical clothing. Contaminated clothing of a hospital staff can be a vector of nosocomial infecton. actual case of nosocomial infecton caused by contaminated medical clothing, nursing students were measuring contamination levels of uniforms and pathogenic microorganism wdetected in front of the uniform and pocket. There is also a high risk of exposure to contamination in the dental hospital. We conducted a study to enhance awareness about infection and proper clothing management by comparing before and after contamination of clothing caused by aerosols produced during scaling. Subjects were scaling operators' uniforms in the department of dental hygiene, K University located in Daejeon. Before scaling, the uniform was sterilized by autoclavecaling was performed times in the same place (an average of 60 minutes per person, a total of 180 minutes). ive parts of the uniform (sleeves, chest, belly, thigh, edge of pants) contracted Rodak-plate for 15 seconds. After incubating the contacted Rodak-plate at 37℃ incubator, contamination levels by measuring the number of colonies. As a result, all parts increased number of colonies. ontamination order chestedge of pants thigh belly sleeves. Increase rate of colonies was also high in the order chest edge of pants thigh belly sleeves. This study showed seriousness of clothing contaminationcaused by aerol produced during scalingcontamination of clothing can be a path to nosocomial infecton. According to th study, infection control for clothing as well as dental instruments should be implemented and thorough infection control training needed for dental staff. In further researches, practical infection prevention supplementing clothing management method.

• Korean Journal of Breeding Science
• /
• v.51 no.3
• /
• pp.190-200
• /
• 2019

It is reported that the absence of lipoxygenase-3 (LOX-3) may contribute to a reduction in stale flavor after the storage of rice. To improve the quality of stored rice of the Korean japonica rice cultivar, we conducted a breeding program to develop near-isogenic rice without LOX-3 in the genetic background of Saenuri, a mega variety of Korea. In the first step of the breeding program, we used a donor parent of LOX-3 null, Daw Dam, and a recurrent japonica parent, Sindongjin, to develop HR27873-AC12 by backcross (BC₁), color test for introgression of lox-3, and anther culture for rapid fixation. In the second step, we used the donor parent, HR27873-AC12, and the recurrent parent, Saenuri, to develop HR28896-31-3-1-1 by backcross (BC₁), marker-assisted selection (MAS) for lox-3, and phenotypic selection (PS) for agronomic traits. Finally, in the third step, we developed HR30960-186-2-1-2-1 (Jeonju624), derived from a cross between Saenuri and HR28896-31-3-1-1, by MAS for lox-3 and PS with high selection pressure for agronomic characteristics. Jeonju624 was confirmed with the introgression of lox-3 by molecular marker. Jeonju624 was a mid-late maturing rice with similar agronomic characteristics to Saenuri, lodging tolerance with short culm, erect plant architecture, and resistance to bacterial blight and rice stripe virus. The yield components of Jeonju624 were mostly similar to Saenuri, except for the 1,000-grain weight of brown rice. The appearance of the grain of Jeonju624 was better than that of Saenuri, and the characteristics of cooked rice were similar to those of Saenuri. In the genetic background analysis using 406 KASP (Kompetitive Allele-Specific PCR) markers, Jeonju624 was confirmed to be the near-isogenic line (NIL) of Saenuri with a 95.8% recovery rate. Jeonju624 is the NIL of Saenuri without LOX-3, and overcomes the linkage drag of Daw Dam with similar agronomic characteristics and genetic background to Saenuri. Jeonju624 can be utilized as a practical cultivar to improve the quality of stored rice, breeding material for the introgression of lox-3, and genetic material to elucidate the effect of introgressed genes.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.43 no.4
• /
• pp.216-224
• /
• 2023

Since maize (Zea mays L.) originated in central and south America, it requires warm climate conditions throughout its growing season. Growth halts when night-time temperatures drop below 10℃, and the plant may die if temperature reach -1.7℃. Thus, temperature should be maintained between 10 and 30℃ from seeding to maturity. The germination temperature for maize should be at least 8-11℃, whit an optimal range 32-34℃. Since temperature significantly affects the germination rate and period, it plays a crucial role in maize growth. In this study, we evaluated the quantity and feed value of 11 major varieties to determine those best suited for maize cultivation as feed in higher latitude, specifically in Democratic People's of Republic of Korea, below 38 degrees north. A cultivation test was also conducted in Suwon in Republic of Korea, to assess adaptability in areas south of Mt. Suyang. Among the varieties tested, Shinhwangok2 reached silking the fastest, in 65 days, while Gwangpyeongok took the longest at 75 days. The stem length of all varieties exceeded 230 cm. Gwangpyeongok had the tallest stems, while Daanok and Shinhwangok2ho displayed the highest ear ratios. Dacheongok presented the highest values in both dry matter and TDN quantity, with 31,420 kg/ha and 21,66 kg/ha respectively. Pyeonggangok had the highest crude protein content at 8.0%. TDN (%) ranged from 57-68%, with Hwangdaok reaching up to 68%. Based on these findings, Dacheongok and Pyeonggangok appear to be the most suitable varieties for cultivation in terms of both quantity and feed value.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.1
• /
• pp.253-270
• /
• 2023

Research on investment determinants of accelerators, which are attracting attention by greatly improving the survival rate of startups by providing professional incubation and investment to startups at the same time, is gradually expanding. However, previous studies do not have a theoretical basis in developing investment determinants in the early stages, and they use factors of angel investors or venture capital, which are similar investors, and are still in the stage of analyzing importance and priority through empirical research. Therefore, this study verified for the first time in Korea the discrimination and effectiveness of investment determinants using accelerator investment determinants developed based on the business model innovation framework in previous studies. To this end, we first set the criteria for success and failure of startup investment based on scale-up theory and conducted a survey of 22 investment experts from 14 accelerators in Korea, and secured valid data on a total of 97 startups, including 52 successful scale-up startups and 45 failed scale-up startups, were obtained and an independent sample t-test was conducted to verify the mean difference between these two groups by accelerator investment determinants. As a result of the analysis, it was confirmed that the investment determinants of accelerators based on business model innovation framework have considerable discrimination in finding successful startups and making investment decisions. In addition, as a result of analyzing manufacturing-related startups and service-related startups considering the characteristics of innovation by industry, manufacturing-related startups differed in business model, strategy, and dynamic capability factors, while service-related startups differed in dynamic capabilities. This study has great academic implications in that it verified the practical effectiveness of accelerator investment determinants derived based on business model innovation framework for the first time in Korea, and it has high practical value in that it can make effective investments by providing theoretical grounds and detailed information for investment decisions.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.4
• /
• pp.45-59
• /
• 2023

The global focus on mitigating climate change has traditionally centered on carbon dioxide, but recent attention has shifted towards methane as a crucial factor in climate change adaptation. Natural settings, particularly aquatic environments such as wetlands, reservoirs, and lakes, play a significant role as sources of greenhouse gases. The accumulation of organic contaminants on the lake and reservoir beds can lead to the microbial decomposition of sedimentary material, generating greenhouse gases, notably methane, under anaerobic conditions. The escalation of methane emissions in freshwater is attributed to the growing impact of non-point sources, alterations in water bodies for diverse purposes, and the introduction of structures such as river crossings that disrupt natural flow patterns. Furthermore, the effects of climate change, including rising water temperatures and ensuing hydrological and water quality challenges, contribute to an acceleration in methane emissions into the atmosphere. Methane emissions occur through various pathways, with ebullition fluxes-where methane bubbles are formed and released from bed sediments-recognized as a major mechanism. This study employs Biochemical Methane Potential (BMP) tests to analyze and quantify the factors influencing methane gas emissions. Methane production rates are measured under diverse conditions, including temperature, substrate type (glucose), shear velocity, and sediment properties. Additionally, numerical simulations are conducted to analyze the relationship between fluid shear stress on the sand bed and methane ebullition rates. The findings reveal that biochemical factors significantly influence methane production, whereas shear velocity primarily affects methane ebullition. Sediment properties are identified as influential factors impacting both methane production and ebullition. Overall, this study establishes empirical relationships between bubble dynamics, the Weber number, and methane emissions, presenting a formula to estimate methane ebullition flux. Future research, incorporating specific conditions such as water depth, effective shear stress beneath the sediment's tensile strength, and organic matter, is expected to contribute to the development of biogeochemical and hydro-environmental impact assessment methods suitable for in-situ applications.