• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.156-159
• /
• 2004

Most formulations for a forming limit diagram (FLD) have been based on yield stress potentials defined in the stress field. Nevertheless, there are formulations where potentials defined in the stain-rate field are especially convenient to formulate the rigid plastic material. Based on a strain-rate potential proposed for materials exhibiting planar anisotropic, the formulations for the forming limit diagram has been developed applying M-K theory. As verification example, the formulation is applied for anisotropic AA5182-O sheet. The good verification results show that the formulation for the forming limit diagram has been successfully developed.

• 한국항공우주학회지
• /
• 제38권2호
• /
• pp.135-140
• /
• 2010

항공기 조종면의 시간당 변화율 한계에 의한 PIO 현상을 해석하는 기법으로 Open-Loop-Onset-Point (OLOP) 방법이 널리 이용된다. OLOP은 조종면의 변화율 한계에 의한 PIO 현상을 주원인으로 포함하고 더 나아가 조종면 구동기의 변위한계도 고려하는 데, 여기서는 이 변위 한계를 고려하는 새로운 방법을 제시하고자 한다. 새로운 기법은 독립된 구동기의 주파수 응답을 고려할 때, 기존의 OLOP 방법이 제시한 바와 달리, 변화율 한계가 시작되는 주파수가 변위 한계에 의해 더 높은 주파수로 지연되지 않는다는 사실을 인지함으로써 그 동기가 되었다. 실제로 피드백 제어 환경에서는 변화율 한계의 시작점이 오히려 더 낮은 주파수에서 일어나는데, 이는 변위 한계의 영향에 의한 제어력 감소분을 극복하기위해 제어기가 더 큰 제어 입력을 발생하기 때문이다. 본 연구는 이렇게 찾아진 변화율 시작 주파수와 변위 한계를 고려하여 OLOP 해석의 최종 단계에서 Nichols Chart 위에 변화율 시작점을 찾는 새로운 방법을 제시한다. 마지막으로 기존의 방법으로는 PIO 예측에 있어서 위험한 판단에 도달할 수 있으나, 제시된 새로운 방법으로는 올바른 예측을 할 수 있음을 보여준다.

• 대한산업공학회지
• /
• 제39권4호
• /
• pp.233-238
• /
• 2013

This article concerns a profit model in a repair limit replacement problem with imperfect repair. If a system fails, we should decide whether we repair the failed system (repair option) or replace it by new one (replacement option with a lead time). We assume that repair times are random variables and can be estimated before repair with estimation error. If the estimated repair time is less than the specified limit (repair time limit), the failed unit is repaired but the unit after repair is different from the new one (imperfect repair). Otherwise, we order a new unit to replace the failed unit. The long run average profit (expected profit rate) is used as an optimization criterion and the optimal repair time limit maximizes the expected profit rate. Some special cases are derived.

• 열처리공학회지
• /
• 제16권6호
• /
• pp.315-319
• /
• 2003

Effect of nitriding on fatigue crack initiation and growth rate has been studied in Ni-Cr-Mo steel. Specimens were nitrided at $860^{\circ}C$ for 15 hr. The fatigue limit of nitrided specimens were superior to those ofannea1ed($860^{\circ}C$, 15 hr) specimens. Based on detailed observations of slip band and micro crack initiation, it is concluded that the excellent fatigue limit of nitrided specimens is attributed to improved slip initiation resistance by nitriding. The characteristic of fatigue crack growth rate of nitrided specimens was investigated by comparing with those of annealed specimens. It was found that the crack growth rate was markedly decreased and the threshold stress intensity factor range was improved by nitriding. It is concluded that the excellent fatigue limit of nitrided specimens is also attributed to improved fatigue crack growth rate and threshold stress intensity factor range by nitriding.

• 산업기술연구
• /
• 제23권A호
• /
• pp.3-7
• /
• 2003

Effect of nitriding on fatigue crack initiation and growth rate has been studied on SNCM. Specimens were nitrided for 15 hr at $860^{\circ}C$. The fatigue limit of nitrided specimens was superior to that of annealed($860^{\circ}C$, 15 hr) specimens. Based on detailed observations of slip band and micro crack initiation, it is concluded that the excellent fatigue limit of nitrided specimens is attributed to improved slip initiation resistance by nitriding. The characteristic of fatigue crack growth rate of nitrided specimens was investigated and compared with those of annealed specimens. It was found that by nitriding the crack growth rate was markedly decreased and the threshold stress intensity factor range was improved. It is concluded that the excellent fatigue limit of nitrided specimens is also attributed to improved fatigue crack growth rate and threshold stress intensity factor range by nitriding.

• Journal of Electrical Engineering and Technology
• /
• 제7권6호
• /
• pp.852-858
• /
• 2012

This paper describes evaluation results of the wind power penetration limit (WPPL) and the wind energy penetration (WEP) in the Mongolian central power system (MCPS). A wind power plant (WPP) in a power system possesses an output power limit because the power system must maintain a balance between the generation and consumption of electricity at all times in order to achieve an adequate level of quality. The instantaneous penetration limit (IPL) of wind generation at a load is determined as the minimum of the three technical constraints: the minimum output, the ramp rate capability, and the spinning reserve of the conventional generating units. In this paper, a WPPL is defined as the maximum IPL divided by the peak load. A maximal variation rate (VR) of wind power is a major factor in determining the IPL, WPPL, and WEP. This paper analyzes the effects of the maximal VR of wind power on the WPPL, WEP, and capacity factor (CF) in the MCPS. The results indicate that a small VR can facilitate a large amount of wind energy while maintaining a high CF with increased wind power penetration.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3286-3297
• /
• 2021

The released hydrogen can be ignited even with weak ignition sources. This emphasizes the importance of the hydrogen flammability evaluation to prevent catastrophic failure in hydrogen related facilities including a nuclear power plant. Historically numerous attempts have been made to determine the flammability limit of hydrogen mixtures including several diluents. However, no analytical model has been developed to accurately predict the limit concentration for mixtures containing radiating gases. In this study, the effect of H₂O and CO₂ on flammability limit was investigated through a numerical simulation of lean limit hydrogen flames. The previous flammability limit model was improved based on the mechanistic investigation, with which the amount of indirect radiation heat loss could be estimated by the optically thin approximation. As a result, the sharp increase in limit concentration by H₂O could be explained by high thermal diffusivity and radiation rate. Despite the high radiation rate, however, CO₂ with the lower thermal diffusivity than the threshold cannot produce a noticeable increase in heat loss and ultimately limit concentration. We concluded that the proposed mechanistic analysis successfully explained the experimental results even including radiating gases. The accuracy of the improved model was verified through several flammability experiments for H₂-air-diluent.

• 대한기계학회논문집
• /
• 제12권5호
• /
• pp.935-943
• /
• 1988

본 연구에서는 유압벌지시험기를 이용한 저속 벌지시험과 낙하해머(drop hammer)를 응용한 충격벌지시험기를 제작, 사용하여 충격벌지시험을 하여 저속변형과 충격변형에서 판재금속의 성형한계선도를 구하고 변형율속도가 판재의 불안정 및 성형 성에 미치는 영향을 조사하고 다이의 형상비(단축/장축)를 0.5, 0.75, 1.0 등으로 달 리하여 실험하므로써 변형경로에 따른 한계변형율의 변화를 관찰하고 아울러 기존의 성형한계이론과 비교, 검토하였다.

• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.127-130
• /
• 2010

This paper deals with the formability of DP590 steel considering the strain rate. The strain hardening coefficient, elongation and r-value were obtained from the static and dynamic tensile test. As strain rate increases from static to 100/s, the strain hardening coefficient and the uniform elongation decrease and the elongation at fracture and r-value decrease to 0.1/s and increase again to 100/s. The high speed forming limit tests with hemi-spherical punch were carried out using the high speed crash testing machine and high speed forming jig. The high speed forming limit of DP590(order of $10^2$/s) decreases compared to the static forming limit(order of $10^{-3}$/s) and the forming limit band in high speed forming test is narrower than that in the static forming test. This tendency may be due to the development of brittleness with increase of stain rate.

• 보건교육건강증진학회지
• /
• 제33권1호
• /
• pp.13-22
• /
• 2016

Objectives: By using six years of KNHANES dataset (2008~2013) about 60 ages older people, we analyzed how the depression prevalence rate in the elderly is influenced by disease and activity limit. Especially, to add a sense of more reality, we adopted stress experience as a control variable to see how the depression prevalence rate in the elderly is influenced by disease and activity limit depending on the stress experience. Methods : We adopted six years of KNHANES dataset, indicating that our results were based on long period of time capable of considering temporal patterns in the depression prevalence rate in the elderly. Total 1,160 elderly people in KNHANES were selected for our empirical analyses. Dependent variable is either 0 or 1 depending on whether the elderly people feel depression. Main explanatory variables for our study include disease and activity limit. Logistic regression analysis was applied for two group such as stress experience and non-experience. Results : According to the empirical results, stress factor is found to be significant in explaining the depression in the elderly. Depression prevalence rate increased when the elderly has stress experience: chronical disease(OR=1.650), chronical disease with activity limit(OR=3.388), non-chronical disease with stress(OR=11.841) chronical disease with stress (OR=13.561) and chronical disease with activity limit and stress(OR=28.691). Conclusions: The finding suggest that the Countermeasures of elderly's depression alleviation should include stress management.